jmagicfinger
join:2004-02-13
Brunei
| Can I view the sign in messages on a Sipura 2000?
I have an spa-2000 which I have configured for fwd and nikotel. The fwd is working fine, but the nikotel just wont register. I've tried everything I and their tech support can think of, and now I want to try and see what the sipura is actually doing, and try to see where the problem lies.
Is there a way to see the messages that the spa-2000 is sending/receiving to see why it won't register. I'm at a loss on what to do next.
Does anyone know how I go about doing this.
Thanks,
J. |
|
vsavulian
Premium
join:2002-11-26
ON
| Load a syslog server on your PC (eg Kiwi Syslog) and configure the Debug Server to your PC's IP address, the Debug level to 3.
These settings work great for my Sipura on Nikotel:
Proxy and Registration
Proxy: calamar0.nikotel.com
Outbound Proxy: calamar0.nikotel.com
Use Outbound Proxy: Yes
Use OB Proxy In Dialog: Yes
Register: Yes
Make Call Without Reg: No
Register Expires: 3600
Ans Call Without Reg: No
Use DNS SRV: No
Proxy Fallback Intvl: 3600
Subscriber Information
Display Name: CallerID display name
User ID: Nikotel Username
Password: Nikotel Password
Use Auth ID: No
Auth ID: [BLANK] |
|
jmagicfinger
join:2004-02-13
Brunei
| Yup, that's exactly the setup that I have, but still it fails to register. I really don't know what to do. I'm using a mac so the windows software won't work for me, forgot to mention that. I thought that the sipura might have a diagnostic page that would tell you what was going on, the softphones have that.
Cheers,
J. |
|
vsavulian
Premium
join:2002-11-26
ON | You can use this Mac OS syslog server:
»www.laffeycomputer.com/netlogger.html |
|
x____
join:2003-02-13
____
clubs:
4 edits | reply to jmagicfinger
Here's a link on Nikotel's site that shows the settings:
»faq.nikotel.com/index.php?sid=73···&lang=en
EDIT: Are you using DNS or an IP to connect to FWD?
Have you tried using the IP 63.214.186.6 as the proxy for Nikotel?
Do you have different ports set for each of the lines?
5060 for line 1 and 5061 for line 2?
Are Firewall features enabled on your router? |
|
jmagicfinger
join:2004-02-13
Brunei
| Hi,
I have setup exactly as shown on that page. I'm using dns, but tried the ip in it's place, which made no difference. I have fwd (line one) on 5061 and nikotel (line2) on 5065 (tried a few different ones in case that was the problem).
I have a firewall router (netgear FM114P), and have tried enabling/disabling port forwarding, but it makes no difference. Currently I have no port forwarding set, and it works just fine with fwd.
My next option is to set the sipura as the dmz and see if that works, but I'm not sure what changes need to be made to the setup.
Thanks for any help you can offer,
J. |
|
