Re: Adelphia hdtv - dslreports.com

Author	All Replies
Pete Kuncis @adelphia.net	reply to ijgolf Re: Adelphia hdtv ijgolf: You have to setup the cable box to see your 16:9 screen. Shut off your cable box. Hold down the Guide & Info buttons on the cable box. Then the screen setup starts. Setup your screen for 16:9 and 1080i. Turn on the cable box. Your HD channels should fit with no black bars. Now all your nonHD channels will have bars on the left & right. Go into the Advanced Settings. You'll see the setting for Picture Size. Set it to Stretch. This will stretch all the nonHD channels to fill with no black bars, but it won't change the HD channels. You should be good after that. The Guide bar on the bottom of the screen doesn't fit like before, but who cares! Pete
Pete Kuncis @adelphia.net	to forum · permalink · 2004-01-11 21:12:50 · (locked)
ijgolf join:2003-12-29 Lake Worth, FL	Thanks. I have tried that but my set is a 4:3 hdtv. I know the hd will have bars on the top and bottom, but on the non-hdtv - I have to reset the scan lines to 480 to get a full picture. If not, I get a 4:3 picture with a 2" black border all around. I thought there was a way to reset itself to a full screen. Thanks again. Your info works perfect on a 16:9 set, which I did for my friend.
ijgolf join:2003-12-29 Lake Worth, FL	to forum · permalink · 2004-01-11 22:01:52 · (locked)


Monday, 09-Nov 00:43:20	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com. page compression OFF