rbdasf
join:2003-01-29
Souderton, PA | reply to jtudor
Re: HELP~~ Earthlink/Barricade Router & WinME
yes...the Barricade router showed a DNS number...I have the router and computers set up to obtain IP automatically. The Pc's TC/IP connection is set up with "Disabled DNS" (per instructions) and use DHCP for Win Resolution |
|
mballard
Premium,ExMod 1999-03
join:1999-11-15
Los Angeles, CA
clubs: 
| While connected to the router (with the router connected to the internet), try going into winipcfg, you might have to click on More Info, but check if the computer shows as receiving any DNS. If not, try releasing and renewing the address for the Ethernet adapter and then see if you do. |
|
rbdasf
join:2003-01-29
Souderton, PA | well...I do believe I have tried that already too! But unfortunately, I am @ work right now and cannot try that fix to confirm. But honestly, I really do think I have tried that.
Any other insights? |
|
mballard
Premium,ExMod 1999-03
join:1999-11-15
Los Angeles, CA
clubs: | When you tried it, were you able to get DNS servers on there? (I just need to know if your computer is even getting DNS to use, and what they are to verify if they are correct). |
|
rbdasf
join:2003-01-29
Souderton, PA | Ok - will try tonite..probably around 7:30 - 8:00 East coast time. will let you know what comes up. |
|
rbdasf
join:2003-01-29
Souderton, PA
| Ok, Here's all the data -
Barricade:
IP: 4.35.xx.xxx
Subnet Mask: 255.255.255.255
Gateway: 4.35.75.144
DNS: 64.34.64.36, 64.34.48.36 DHCP Server: Enabled
Computer: WinIpConfig
DNS: 64.34.64.36
Node type: Broadcast
IP: 192.168.123.166
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.123.254
DHCP Server: 192.168.123.254
Did it ALL again and...the infamous, "Page cannot be displayed, blah,blah,blah - cannot find server or DNS error"
removed IP address - mballard 
[text was edited by moderator] |
|
mballard
Premium,ExMod 1999-03
join:1999-11-15
Los Angeles, CA
clubs:
| I think I know what the problem is, the DNS being shown by both the router and the computer are your old DNS for DirecTV DSL, which is almost certainly why DNS resolution isn't working. Check the router's setting to see if DNS is set manually, look around carefully, you might have to change back to static temporarily and change it, but you want the router to get it's DNS automatically (through PPPoE), the first step is to get the router showing the correct DNS, which I believe for your type of connection should start with 4.2.2. Once you get that showing properly, then release and renew your computer's IP, which should then show the same as the router, at that point, it should start working. |
|
rbdasf
join:2003-01-29
Souderton, PA |  Mballard - - - My Friend! YOU ROCK! Great job for you have solved my riddle ! It was EXACTLY what you said - deleted the DirectTV DNS #'s - and Whoolah! Up it came!
Many MANY thanks..so far...Earthlink does rock as it seems to really fly... |
|
skj
Welcome to the far side of reality
Premium,Mod
join:2002-04-04
Atlanta, GA
Host:
Charter HSI/CATV
Earthlink DSL
Embarq
ISP b2b etc
Cisco
| said by rbdasf :
Mballard - - - My Friend! YOU ROCK! Great job for you have solved my riddle ! It was EXACTLY what you said - deleted the DirectTV DNS #'s - and Whoolah! Up it came!
Many MANY thanks..so far...Earthlink does rock as it seems to really fly...
We are very fortunate to have him as our host. Not only is he very knowledgeable, he does a great job moderating our forum. Very unintrusive, but knows when to step in there when things get out of hand. |
|
mballard
Premium,ExMod 1999-03
join:1999-11-15
Los Angeles, CA
clubs: | reply to rbdasf
Your welcome, I'd glad to hear it's up and running.
skj: Thanks for the comments, I really appreciate them. |
|
