Dude6
@attbi.com
| reply to reflection
Re: San Jose, CA : ATTBI just cut D/L rates in half!!
I live is Los Gatos. There was a DEFINATE change made. My pings are now perfectly acceptable at ALL TIMES OF THE DAY! Whereas I would ping 300+ everywhere and my first tracert hop would be 90-200 I now get 14ms pings to the first hop and most servers around here I play games on are now in the 50ms range. What config file are you referring to? I am not familiar with what you are speaking about. Yes, I've based this observation on about 3 days worth of doing tests the the San Jose Megapath tester on this site's tools. I actually like having better pings with a slower rate then the way it was set up before (1.5mbps down but latency was horrid) because I can again play FPS games online with little to no lag issues, I only notice the reduced bandwidth when downloading files. But, ATTBI does advertise 1.5mbps down and to halve that without notice is irresponsible. |
|
djdanska
Premium,MVM
join:2001-04-21
Tampa, FL
clubs:
 ·A + Net
 ·Mediacom
·RCN CABLE
 ·T-Mobile US
| Re: San Jose, CA : ATTBI just cut D/L rates in hal
To see what your caps are set at, do the following.
Download the attachment. (it's docsdiag made for attbi (except mediaone areas. if you are, sorry)
Run the attbi one for your system.
it works with 95,98,98se,me,2000,and xp.
post what it says so we can look at it and see what's going on.
--
Gir Quotes: Aw, I wanna watch the scary monkey show! - "I need tacos, or I will EXPLODE....I do that sometimes..." |
|
TSLK_2311
join:2001-08-03 | What do yo mean except mediaone areas? I'm in a mediaone area and it works perfectly fine. |
|
djdanska
Premium,MVM
join:2001-04-21
Tampa, FL
clubs: | It does work. cool. I had a few people in the mediaone areas not be able to get it to work. Im glad it worked. |
|
TSLK_2311
join:2001-08-03
| said by djdanska  :
It does work. cool. I had a few people in the mediaone areas not be able to get it to work. Im glad it worked.
I'm glad it worked too:) I'll post a pic to confirm. |
|
Azz
join:2000-09-19
Lynn, MA | reply to djdanska
"Cable modem not found"  |
|
jokerjury
join:2000-11-18
Salt Lake City, UT | If you are switching from a router to connecting directly to the cable modem make sure you release and renew your ip address of your pc for each switch. |
|
Namellina
@199.227.x.x
| reply to djdanska
This is from ATTBI in Ft. Lauderdale.
System up time = 4 days 08h 18m 59.00s
Ethernet alignment errors.1 = 512
Ethernet FCS errors.1 = 148
Ethernet single-collision errs.1 = 16384
Ethernet multiple-collision errs.1 = 8
Ethernet deferred xmits.1 = 16392
Ethernet late collisions.1 = 16416
Ethernet excessive collisions.1 = 528
Ethernet other xmit errors.1 = 193
Ethernet frame too long recv errs.1 = 8
Ethernet other recv errors.1 = 1024
Downstream channel ID = 1
Downstream channel frequency = 693000000 Hz
Downstream received signal power = 8.4 dBmV
Upstream channel ID = 3
Upstream channel frequency = 26480000 Hz
QoS max upstream bandwidth = 300000 bps
QoS max downstream bandwidth = 1800000 bps
SigQu: Signal to Noise Ratio = 34.3 dB
Cable modem status = Operational
Upstream transmit signal power = 36.0 dBmV
Date and Time = 2002-12-26,06:26:34.0+06:00
Configuration filename = hsd1.5M.cfg |
|
djdanska
Premium,MVM
join:2001-04-21
Tampa, FL
clubs: | QoS max upstream bandwidth = 300000 bps
QoS max downstream bandwidth = 1800000 bps
Cool. you are at 1800/300 out there in florida
--
»media.danboy.net |
|
Namellina
@199.227.x.x | Yes, this is just recent. Surprised me that's for sure! Now I'm waiting for the price increase. |
|
diskus
join:2002-12-27
Los Gatos, CA | reply to djdanska
I am in the san jose area and have yet to be able to get part the cable modem not found error regardless of what script version or connection i use reboots powercycles etc
MB |
|
summiter1
join:2002-12-25
Cupertino, CA | Yes, you (and I) are in need of the elusive snmp community string set by attbi. That being said -
Does anyone know the community string currently in use in the South Bay systems? (it aint uuu9xzr5)
--Summiter |
|
bkucharski
join:2001-11-09
Homer Glen, IL
| reply to djdanska
I had been having problems with my At&T Cable Internet Service for a long time. I am located in the south-west suburd of Chicago - Lockport.
I started with MediaOne and then @HOME and then AT&T and now I guess it will soon be ComCast.
I had the original Motorola CyberSurfer (grey). When I called Tech Support and told then I was have lots of latency they checked the line and then passed me along to Level 2.
The Level 2 tech did not know do I was getting service since they could not access my modem. I informed him of what modem I had and asked if it was DOCSIS compliant.
He said NO! So I now have a new tan SurfBoard SB3100 now I have more than 63 registering for my upload and DL as a little faster too.
Check me out: |
|
panda
Visualize Whirled Peas
join:2000-01-08
Danvers, MA
| reply to djdanska
said by djdanska :
To see what your caps are set at, do the following.
Download the attachment. (it's docsdiag made for attbi (except mediaone areas. if you are, sorry)
Run the attbi one for your system.
it works with 95,98,98se,me,2000,and xp.
post what it says so we can look at it and see what's going on.
DocsDiag v020714 Copyright 2001-2 Robin Walker rdhw@cam.ac.uk
Motorola Corporation SB4200 Cable Modem: Hardware version: 1; OS: VxWorks 5.3.1;
Software version: 0.4.4.0p
System up time = 0 days 06h 45m 15.00s
Ethernet alignment errors.1 = 44865
Ethernet FCS errors.1 = 34455
Ethernet single-collision errs.1 = 19451
Ethernet multiple-collision errs.1 = 38051
Ethernet deferred xmits.1 = 13203
Ethernet late collisions.1 = 58330
Ethernet excessive collisions.1 = 34253
Ethernet other xmit errors.1 = 14675
Ethernet carrier sense xmit errs.1 = 32667
Ethernet frame too long recv errs.1 = 47759
Ethernet other recv errors.1 = 51231
Downstream channel ID = 1
Downstream channel frequency = 691784500 Hz
Downstream received signal power = 11.7 dBmV
Upstream channel ID = 2
Upstream channel frequency = 35256000 Hz
QoS max upstream bandwidth = 300000 bps
QoS max downstream bandwidth = 1800000 bps
SigQu: Signal to Noise Ratio = 38.5 dB
Cable modem status = Operational
Upstream transmit signal power = 32.0 dBmV
Date and Time = 2003-01-30,05:37:04.0+06:00
Configuration filename = hsd1.8M.cfg
Press any key to continue . . .
--
"[He] couldn't get a clue if he stripped naked, rubbed himself with clue musk, went to the middle of the clue breeding grounds at the height of clue breeding season when it was full of horny clues and did the clue mating dance for days." |
|
nismo6
join:2002-03-12
Wilmington, CA
| reply to Namellina
This is from ATTBI Carson City, CA
DocsDiag v020714 Copyright 2001-2 Robin Walker rdhw@cam.ac.uk
System up time = 0 days 01h 41m 51.00s
Ethernet alignment errors.1 = 27358
Ethernet FCS errors.1 = 57306
Ethernet single-collision errs.1 = 46723
Ethernet multiple-collision errs.1 = 48718
Ethernet deferred xmits.1 = 45207
Ethernet late collisions.1 = 64478
Ethernet excessive collisions.1 = 52494
Ethernet other xmit errors.1 = 23759
Ethernet carrier sense xmit errs.1 = 48846
Ethernet frame too long recv errs.1 = 15391
Ethernet other recv errors.1 = 64927
Downstream channel ID = 2
Downstream channel frequency = 739786900 Hz
Downstream received signal power = -14.5 dBmV
Upstream channel ID = 1
Upstream channel frequency = 25328000 Hz
QoS max upstream bandwidth = 300000 bps
QoS max downstream bandwidth = 1800000 bps
SigQu: Signal to Noise Ratio = 32.6 dB
Cable modem status = Operational
Upstream transmit signal power = 33.0 dBmV
Date and Time = 2003-01-31,04:10:10.0+06:00
Configuration filename = hsd1.5M.cfg |
|
