Re: Linksys SPA 2102 ATA - dslreports.com

Author	All Replies
paranoi7 join:2008-01-17	reply to SteveinNC Re: Linksys SPA 2102 ATA I'll give it a try one more time. I found the following instructions as well... When I connect ata, modem, pc and phone and pick up the phone, it is dead because there is no connection, right? Am I supposed to just dial as per instructions below and get the response??? On the Linksys, web admin access is disabled. To enable it, pick up phone, dial **** then 723646# , when asked for password, dial 78778839# , when asked for value dial 1# then dial 1 to save. Then, go to »192.168.0.1/admin/voice/advanced , enter user and password.
paranoi7 join:2008-01-17	to forum · permalink · · 2009-06-30 10:07:13 ·
Dan_voip join:2007-01-03 Canada	said by paranoi7 : On the Linksys, web admin access is disabled. To enable it, pick up phone, dial **** then 723646# , when asked for password, dial 78778839# , when asked for value dial 1# then dial 1 to save. Then, go to »192.168.0.1/admin/voice/advanced , enter user and password. You might need to disconnect WAN cable and try that procedure after.
Dan_voip join:2007-01-03 Canada	to forum · permalink · · 2009-07-01 14:02:23 ·
paranoi7 join:2008-01-17	Still no luck. I get no response when I dial ****
paranoi7 join:2008-01-17	to forum · permalink · · 2009-07-02 14:52:36 ·


Monday, 23-Nov 23:43:40	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com. republican-creole page compression OFF