CrazyJo82
join:2004-04-19
Scarborough, ON
| Linksys Diag light...
I have Linksys WRT54G ver1 running HyperWRT 2.1b1 Thibor 15c...
Lately, the 'diag' light has turned on. My connection is fine, I can access the web and the wireless laptop is able to connect without problem. I had tried resetting the router itself and it had worked for only a few weeks. Now, the 'diag' light is back on again.
None of the solutions I've search seemed appropriate... since it's not blinking. Is it the power supply? Unplugging and replugging didn't seem to work... What could be the cause of this?
Thanks for any help for suggestions. |
|
punker
deleted by moderator
Premium
join:2004-06-21
Palmdale, CA
clubs: | bad nvram settings |
|
CrazyJo82
join:2004-04-19
Scarborough, ON | reply to CrazyJo82
oh ok... how do i fix the problem? |
|
Dustyn
Premium
join:2003-02-26
Ontario, CAN
|  said by CrazyJo82  :oh ok... how do i fix the problem? Try replying to punker instead of yourself and hopefully he'll get back to you. |
|
CrazyJo82
join:2004-04-19
Scarborough, ON
| reply to punker
Oh... thanks Dustyn 
I've been looking in the settings on the router but I have no idea on how to either reset the nvram setting or repair it.
I really dont want to press and hold the reset button because I've did that a few weeks ago and the problem has turned... |
|
punker
deleted by moderator
Premium
join:2004-06-21
Palmdale, CA
clubs:
 ·Time Warner VOIP
 ·RoadRunner Cable
edit:
May 20th, @04:41PM
| before you clear the nvram setting what power supply are you using
Linksys or 3th party PSU
Please Note that 1.0 USES 5 VOLT @ 2.0Amps PSU
using an 12volt will fry it i have done that before  |
|
CrazyJo82
join:2004-04-19
Scarborough, ON | it's the original linksys power supply which is the 5v at 2.0 amps |
|
bshelly
Premium
join:2002-02-17
Schaumburg, IL
clubs:
·AT&T CallVantage
| When my PS was going bad on my v1, my diag light would come on. I would suggest finding a replacement, preferably one from Linksys. They need to make sure it is the 5v 2amp. I switched mine out with my old La Fonera router PS and it is rated the same and the pinout is the same. It works great even more than a year later. |
|
CrazyJo82
join:2004-04-19
Scarborough, ON | interesting...
i have another linksys router (BEFSR41) but that ps doesn't fit into wrt54g... I'll look into a ps replacement... |
|
CrazyJo82
join:2004-04-19
Scarborough, ON
edit:
May 23rd, @12:17PM
| well, i unplugged the power supply and now it doesn't even work. lol
and i can't find anything around the house that has the same voltage... i'm curious, a 9V 2A power supply wont work would it? It has to be 5V, right?
any links where i can find a replacement? all the ones i've looked at are for later models... |
|
unknvoip
join:2006-07-25
Rochester, NY
·ViaTalk
| said by CrazyJo82 :and i can't find anything around the house that has the same voltage... i'm curious, a 9V 2A power supply wont work would it? It has to be 5V, right? I depends on what you router to do - create smoke or work as a router. You never want to use a high (or lower) voltage on any device. |
|
CrazyJo82
join:2004-04-19
Scarborough, ON | lol, no, i dont want smoke... and i tried the 9V... it doesn't fit.
i just need to go buy one... really dont want to spend $60 on a new router... |
|
CrazyJo82
join:2004-04-19
Scarborough, ON
| reply to CrazyJo82
router's burnt as well... now i have to buy a new one... i wanted to test if it was the router or the power supply... i think the 9v plugged for 1 sec... killed it. lol
what's the best custom firmware for wrt54gl?
thanks for the help and suggestions |
|
