republican-creole
Search:  

 
 
   All ForumsHot TopicsGallery






how-to block ads


 
Forums » Industry Forums » Wireless Service Providers » -90 on AP, -62 on Client
Search Topic:
Share Topic:
RSS topic:
toggle:
flat / full
normal / watch
Posting:
Post a:
Post a:
Speed ? »
« Grounding  
AuthorAll Replies

bcbuie

join:2005-07-20

reply to nwn
Re: -90 on AP, -62 on Client

I think he was saying the trees would not be the REASON for the difference in signal readings. When you moved the CPE and picked up a signal on the CPE, the signal probably increased equally on both ends. It just turns out that the signal at the AP was not higher than the AP's sensitivity, so it showed no signal.

The reason for the difference would most likely be higher amplification at the AP end than at the CPE end, it is a pretty common problem.

Remember, amplification is one-way. All things being equal, if you have 30db output power at the AP, but only 23db output power at the CPE, then you would see 7db less signal at the AP (assuming equal antenna gains).

The easiest solution is to just use a higher gain antenna at either the AP or the CPE. Antenna gain is bi-directional and is typically preferred over increasing output power.

Having said that, -90 at the AP and -62 on the client is a big gap. What is the output power and antenna gain of the AP (and the CPE)?

Ben

nwn
Premium
join:2004-03-05
Centerville, IN

reply to Antennaguy
said by Antennaguy See Profile:

Antennas, trees and multipath will not create a difference between these units because they affect the total path in both directions.
Until 2 weeks ago I would agree, but...
In my lab I had a client set up pointing directly at my POP 2.5 miles away. Wasn't trying to connect, just that is the direction it was laying. No signal either direction, trees are in the way. I moved some things and the CPE antenna moved 90* AWAY from the POP. It was now pointing directly at the woods 70' from the lab. Client showed -80 RSSI from the AP. Don't remember the LQ. AP saw nothing from this client.
The only explanation I have is that enough of the AP signal bounced of the trees for the CPE to see it, but because of distance, direction, antenna gain, etc. the AP could not see the CPE.

I would think the same thing could apply here, the CPE is seeing the AP on a path that does not work the other way.
--
Scott
Forums » Industry Forums » Wireless Service ProvidersSpeed ? »
« Grounding  


Thursday, 26-Nov 22:23:17 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 10 years online! © 1999-2009 dslreports.com.republican-creole
page compression OFF
Most commented news this week
· [109] New AT&T Ad Campaign Hits Back At Verizon
· [109] Time Warner Cable Fires Broadside At Broadcasters
· [95] Apple Joins AT&T Verizon Snark Fest
· [87] New Bill Takes Aim At Higher Verizon ETFs
· [69] TiVo Sees Record Customer Losses
· [62] In-Flight Internet Headed For Bumpy Landing?
· [53] Thanksgiving Open Thread
· [37] ICANN Slams DNS Redirection
· [35] EFF Wages War On Fine Print
· [34] Senators Want ACTA Made Public
Most people now reading
· Bell Response to PIPEDA Request [TekSavvy]
· I'll Just Unplug That... [No, I Will Not Fix Your #@$!! Computer]
· Not strictly "Home" related - but WOW anyways... [Home Repair & Improvement]
· IPComms Free DIDs now with sip registration maybe?? [VOIP Tech Chat]
· HOW-TO: QoS and Tomato (fixes "choppy voice") [MagicJack]
· Newegg Black Friday Sale started [Users Find Hot Deals]
· Whats the big deal about being "Old School"....? [World of Warcraft]
· [ Classes] Druid tanking: rotation and glyphs [World of Warcraft]
· 3.x Feral Druid - Bear Tanking Guide [World of Warcraft]
· Ottawa South Highspeed - WOW! [Canadian Broadband]