  billaustin Bill Premium,MVM join:2001-10-13 North Las Vegas, NV
| reply to jdmarti1 Re: Omni at 100' on a 192' tower
The effects will vary with the tower type and location of the antenna on the tower. You could end up with a null (dead spot) in the pattern on the far side of the tower. The multi-path and reflections from the signal bouncing off the tower could wreak havoc with your coverage area. Then again, you just might get it in that 'right' spot where everything works fine and it doesn't make any difference.
If you can use an offset or side mount and get it 2 to 4 feet out from the tower, you should be fine. |