tchomicz
join:2005-04-02
Chicago, IL
| reply to wayjac
Re: Modem setup with Sonicwall TZ170
Update for those interested. I'm finally able to access the modem config through my sonicwall.
Network Settings
Modem 192.168.0.1/16
Sonicwall TZ170 192.168.1.1/24
Cisco 2950 192.168.1.105/24
Access Point 192.168.1.104/24
Printer server 192.168.1.103/24
DHCP server 192.168.1.100/24
Clients via DHCP 192.168.1.10-192.168.1.99/24 |
|
wayjac
Premium,MVM
join:2001-12-22
Indy
 ·AT&T Midwest
| reply to tchomicz
Over the last year I've had three occasions were internet requests and 192.168.0.1 will get no response, turning the modem off then on resolves this.
The modem's DHCP server can be unreliable, I would avoid using it.
Start troubleshooting with a direct connection to the modem and work your way deeper into your Lan.
--
God bless our troops |
|
tchomicz
join:2005-04-02
Chicago, IL
| reply to wayjac
Thanks for the replies, I mis-spoke. The modem should definitely be doing the PPOE.
Selected that option and added username and password. In addition my Sonicwall is set to DHCP on WAN interface. This is driving me nuts, it has to be something simple I'm overlooking. |
|
wayjac
Premium,MVM
join:2001-12-22
Indy
·AT&T Midwest
| reply to tchomicz
You can have "PPPoE is on the modem" selected with the dot in the gui, but you must also have a user ID and password entered for the modem to actually do the authentication.
Without a user ID and password entered and "PPPoE is on the modem" selected the modem will relay/bridge a PPPoE session.
If the modem is not doing the PPPoE session I don't think its possible to reach its IP address from within the PPPoE session.
--
God bless our troops |
|
Mchart
Super Joe
join:2004-01-21
Gurnee, IL | reply to tchomicz
Sorry, I did'nt even fully read your thing. Well I have no idea, if you had a linksys/cisco router I might be able to help. |
|
tchomicz
join:2005-04-02
Chicago, IL
| reply to Mchart
Since i'm doing PPOE on the router, there shouldn't be a dual NAT issue.
From what I can tell the TZ170 is getting a class A via DHCP from the modem. The router LAN port is 192.168.1.1/16
and the modem is 192.168.0.1/16.
Can you explain NAT redirection, I'm at a loss here. |
|
Mchart
Super Joe
join:2004-01-21
Gurnee, IL | reply to tchomicz
Make sure NAT redirection is off. |
|
RadioDoc
58ef2c0
Premium,ExMod 2000-03
join:2000-05-11 | reply to tchomicz
Did you mean you can't ping 192.168.0.1? What do you have on that address? It's the admin address of the modem. |
|
tchomicz
join:2005-04-02
Chicago, IL
2 edits | Need some help here. I've done everything I can imagine and I'm at a loss. Basically I want to be able to manage/login to my modem without a direct connection.
I have a 5100b, set up to do PPP on modem
My Sonicwall is set to receive it's WAN IP from DHCP
I have W2k server doing DHCP internally. Giving out 192.168.1.1 - 192.168.1.100/255.255.0.0. I've excluded 192.168.0.1-192.168.0.10 for static IPs I use.
All connections work, I can ping the firewall, DHCP server, AP, and switch from any computer on the LAN. What I can't do is ping 192.168.0.1
sorry corrected 192.168.0.1
Any help would be appreciated! |
|
