cmaenginsb
Premium,MVM
join:2001-03-19
Palmdale, CA
| reply to namespace
Re: Deliberant PtP test link w/ problems
While Tim is correct, generally I just point the radios away from each other and keep them about 10 feet apart. This enough to prevent buring out the recieve section for bried testing purposes.
Soemthing I've learned the hard way is to always test the configuration on a point to point link in the shop before trying to deploy them over any kind of distance.
It's a major PITA to have to walk/drive to the other end just because you forgot one setting. |
|
bito
Premium
join:2001-10-08
Atlanta, GA | Yar, I agree. Although sometimes you can put the 1st one in client mode and connect and fix you fckup, thus preventing the return trip. I speak from personal experience  |
|
DSLbyAir
Premium,MVM
join:2003-04-10
Ocean Springs, MS
 ·AT&T DSL Service
| Gentlemen, one easy rule of thumb, if it doesn't work on the ground...it will not work in the air. Just something to remember before you climb 100+ft to install the equipment.
--
If you can't fit, force it, and if it breaks, it needed replaced anyway! |
|
