Re: using WRT54G as a bridge to another WRT54G

Forums » Equipment Support » Hardware By Brand » Linksys » using WRT54G as a bridge to another WRT54G


Share Topic:	RSS topic:	toggle: flat / full normal / watch	Posting:	Post a:	Post a:

Links: ·Forum Rules ·Forum FAQ ·FTP Modes & Ports ·Linksys Home

[wireless] wrt54g port forwarding to wireless »
« [VPN] WRT54g as a VPN Server

digixmax

join:2004-02-11
usa

Re: using WRT54G as a bridge to another WRT54G

I'm been trying to get my new WRT54G running Satori-4.0 to be a client to my old BEFW11S4 without much success. I was able to ping the BEFW11S4 from a PC which is wired to the WRT54G for just a short period of a minute or so during the course of hours of fiddling.

Can someone who has succedeed in using a WRT54G client with another non-WRT54G wireless router post the client setup configuration and procedure?

Thanks.

permalink · 2004-12-17 14:37:09 ·

digixmax

join:2004-02-11
usa

Re: using WRT54G as a bridge to another WRT54G

I just want to report that I am finally able to get my WRT54G in client mode to work with my BEFW11S4. The client WRT is setup based on the guide »homepage.ntlworld.com/linksysinf···UIDE.pdf. The problem I had appears to be due to the use of wireless MAC filtering on the BEFW11S4. For some reason, even adding the MAC addresses of the client WRT and the attached PC to the filter list did not work, but disabling the wireless MAC filtering entirely and then power-cycling the BEFW11S4 did it.

permalink · 2004-12-17 21:37:46 · Print ·

your comment..

Forums » Equipment Support » Hardware By Brand » Linksys	[wireless] wrt54g port forwarding to wireless » « [VPN] WRT54g as a VPN Server


Saturday, 28-Nov 16:27:40	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com. page compression OFF