Search:  

 
theme to black backgroundlet page decide theme
HomeFind ServiceReviewsISP NewsFAQsForumsToolsDatabaseAbout 
 
   All ForumsHot TopicsGallery






how-to block ads


 
Forums » Equipment Support » Hardware By Brand » Linksys » using WRT54G as a bridge to another WRT54G
Search Topic:
 Share Topic:
RSS topic:
toggle:
flat / full
normal / watch
Posting:
Post a:
Post a:
Links: ·Forum Rules ·Forum FAQ ·FTP Modes & Ports ·Linksys Home
[wireless] wrt54g port forwarding to wireless »
« [VPN] WRT54g as a VPN Server  
AuthorAll Replies

pzero

join:2004-10-11
Italy

reply to grcore
Re: using WRT54G as a bridge to another WRT54G

said by grcore See Profile:

with Satori in client mode, only 1 device is allowed to be connected that unit. If you add more it won't work properly.
This is a big limitation IMHO, any workaround for it?

The client mode of Samahdi and Satori are pretty much the same, Alchemy does thing differently. With Alchemy, the wireless interface becomes the WAN interface of the router. This allows multiple clients to be connected to the client mode WRT (on their own subnet).
This sounds interesting. Will I still be able to use two WRT54G/WRT54GS boxes to create an ethernet (wifi) bridge between two LANs using the same network (e.g. 192.168.0.1/255.255.255.0) on both sides of the bridge.

Any ETA about the Alchemy public release?

Thanks a lot.
to forum · permalink · · 2004-11-28 10:23:41 · Reply to this

digixmax

join:2004-02-11
usa

 I'm been trying to get my new WRT54G running Satori-4.0 to be a client to my old BEFW11S4 without much success. I was able to ping the BEFW11S4 from a PC which is wired to the WRT54G for just a short period of a minute or so during the course of hours of fiddling.

Can someone who has succedeed in using a WRT54G client with another non-WRT54G wireless router post the client setup configuration and procedure?

Thanks.
to forum · permalink · · 2004-12-17 14:37:09 · Reply to this

digixmax

join:2004-02-11
usa

 I just want to report that I am finally able to get my WRT54G in client mode to work with my BEFW11S4. The client WRT is setup based on the guide »homepage.ntlworld.com/linksysinf···UIDE.pdf. The problem I had appears to be due to the use of wireless MAC filtering on the BEFW11S4. For some reason, even adding the MAC addresses of the client WRT and the attached PC to the filter list did not work, but disabling the wireless MAC filtering entirely and then power-cycling the BEFW11S4 did it.
to forum · permalink · · 2004-12-17 21:37:46 · Reply to this
Forums » Equipment Support » Hardware By Brand » Linksys[wireless] wrt54g port forwarding to wireless »
« [VPN] WRT54g as a VPN Server  

Sunday, 08-Nov 17:57:36 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 10 years online! © 1999-2009 dslreports.com.
page compression OFF
Most commented news this week
· [156] Cable Uncapper Faces Criminal Charges
· [140] AT&T Sues Verizon Over 3G Ads
· [112] Why Run Fiber When You Can Run Ads That Pretend You Do?
· [108] Comcast Is Simply Getting Huge
· [92] Apple Cooking Up New $30 A Month TV Service?
· [82] Bits Of ACTA Agreement Leaking Out
· [80] Will 'Three Strikes' Come To The United States?
· [78] Verizon To Double Smartphone ETFs?
· [76] Verizon: Droid Tethering Will Cost $30 Extra
· [73] Comcast, NBC Deal Almost Complete
Most people now reading
· 3.x Feral Druid - Bear Tanking Guide [World of Warcraft]
· [Need Info] Looking for backup software... [Software]
· Why do they traumatize kids in Phys. Ed. in school? [Canadian Chat]
· Connecting to Google Voice Via SIP [VOIP Tech Chat]
· Hit and run [General Questions]
· Maximizing Rogue DPS for 3.1 [World of Warcraft]
· Bandwidth Limits/Congestion Management - All discussion here [Comcast HSI]
· Please Help, I think my computer is being monitored [Security]