voiplover
Premium
join:2004-05-28
Portsmouth, NH
 ·callwithus
·Axvoice
| reply to usa2k
Re: [Vonage] Vonage And ADT Issue
ADT is using a feature called 'sum check' with the alarm signal format. Depending on which receiver answers your alarm call, voip usually will not be able to transmit the signal accurately enough to allow a final kiss off from the alarm receiver. This causes your alarm panel to retransmit the maximum programed number of at temps (7 in your case). ADT's receiver is still posting your alarm in their system but you should not count on a voip line to transmit alarm signal data. |
