Esteban2k
@proxad.net
| reply to Flogator
Re: [wired] BEFSX41 firmware 1.50.18 - POST YOUR RESULTS HERE
I ve solved all my problem of deconnexion with 1.50.18:
- I ve downgraded firmware to 1.45.7 (solve deconnexion IRC,ICQ,AIM)
- i ve made a factory reset
- Configure WAN and LAN setting
- fixed MTU to 1498 (solve probleme of long URL)
Thats all, look like it s pretty reliable now , with SPI enable ... |
|
zealex
join:2004-05-21
Portugal
1 edit | For all that i've seen, it seems that 1.45.7 is the way to go. I'll hold on to 1.50.18 since I do not use mIRC a lot, and everything else I need is working... But if this thing starts rebooting while i'm the middle of a gamming session, then is trash time for it.
By the way, can anyone point out a similar router from a good brand, with similar functionality, that WORKS as expected? |
|
Flogator
Premium,MVM
join:2003-01-19
Cantley, QC
 ·Acanac
 ·Videotron
| reply to Esteban2k
For what it's worth, the neat little trick suggested by Esteban2k about the long URL thingy seems to help but DOES NOT solve the problem. I have attempted to reduce the MTU from 1500 down to 1498 and I was able to access the long URL twice without a reboot. However on the third attempt, the router crashed again. This new observation seems to align with my previous observations where I stated that my DSL connection was only crashing once every three attempts  . DSL uses MTU of 1492 and seems to behave the same (with regards to the long URL thingy) as my cable connection after reducing the MTU. This post is just to brain storm on that long URL thingy. |
|
