rockotman...Blown On The Steel BreezeEmerging Research
reply to tschmidt
Re: %$^%#% - Mail box post rotted out / fellover / was knocked Yup - used those same dimensions last year when I replaced and relocated (to opposite side of driveway) my mailbox and post, and got a big thank-you note from the mail carrier. No curb here, so I went by the edge of the berm of the road.
p.s., it took all of about an hour of my time, and a good portion of that was rummaging through my old coffee can of odds and ends screws to find 4 that matched, and trimming down a board to mount to the horizontal rail of the post that would accommodate the mailbox my wife selected.
Shine on you crazy diamond...
·Northland Cable ..
reply to nunya
said by nunya:I resolved this when I set the concrete by "doming" the concrete up towards the post. Water sheds away from the wood.
I wouldn't put it in concrete:
#1) it will hold water and make it rot faster.
Also, I protected the wood with linseed oil prior to putting it into the concrete. Been in there 7 years and it is doing fine.
My mailbox is a mailbox-in-a-mailbox. Protected by a layer of concrete between the 2 boxes. Heavy as crap, thus requiring me to put the post in concrete.
reply to nunya
said by nunya:Don't know.
What does she look like in a bikini? Was it worth a mailbox?
Their insurance covered the mailbox though.
I may have been born yesterday. But it wasn't at night.
reply to scooper
I just replaced mine. I bought a USP 4" x 4" Painted Base at Lowes and set it in concrete. Then I cut a cedar mailbox post to length and mounted it. Now if my post rots out or gets beat up, I can easily set a new one without digging out the concrete. I find it to be win-win: stability and modularity.
The Yakabox | My Development Sandbox | LinkedIn Profile
·Time Warner Cable
·Embarq Now Centu..
reply to scooper
To close out -
Wednesday night (Aug 8), the wife and me had dinner at Carrabba's for our 25th anniversery. On this same lot is a Home Depot, so we decided to see what they had on "mailbox posts / materials". Found a metal 30 inches long stake like thing that had a collar for a 4x4 post - got this and a $2 piece of scrap 4x4. Went home, and didn't do anything about until today.
This morning - brought the old post up to the house, and after looking at - decided to take the circular saw to it to see if there was enough post after removing the rotted endpiece. Fortunately - there was. Cut off a piece off that scrap 4x4 (unfortunately - about 1-2 inches too short), grabbed the stake thingy and a sledgehammer to beat it into the ground.
All went well until I realized I had accidently struck the sides of the collar a few too many times on one side and my "beating piece" was stuck. Eventually, got that unstuck, used a longer piece of 4x4 to finish driving it in, then put the old post into the collar and tightened up the nuts and bolts.
I had been wanting to move the mailbox for awhile anyway, this just gave me an excuse.
I've just started thinking that I might want to put some through bolts through the collar and the post.