 | reply to nascar
Re: [IMG] IMG 1.9.1 Just got the popup that the update will be happening on 5/22. I'm in VHO8. |
|
 tnsprin join:2003-07-23 Bradenton, FL kudos:1 | said by Vzfios52112 :Just got the popup that the update will be happening on 5/22. I'm in VHO8. VHO 7 and VHO 8 are in the same DAC, so it makes sense that both are seeing an update message. |
|
 whsbuss join:2007-08-10 Philadelphia, PA | reply to Vzfios52112 said by Vzfios52112 :Just got the popup that the update will be happening on 5/22. I'm in VHO8. Same here!! |
|
 | Yep. Message popped up this morning. VHO7 |
|
|
|
 nascar join:2000-02-28 Verona, NJ kudos:2 1 edit | reply to nascar I can't edit this anymore so here is the update as of 5/20:
1.9.1 Build 14.47 Bug Fixes 1. The buffer would be lost on the 7232 and you could not use trick play such as rewind or fast forward on Live TV after idle period 2. 7232 reboots and resets 3. Video jigger, jitter, or strobe effect (Im not sure this is 100% fixed but it is close) 4. New color change to address: Consistency, Contrast, Brightness, and overall readability 5. Cast is shown at the first Info button press on Recordings (Plan is to possibly remove second button press for Full Info and just have it on the first button press) 6. Corrected different channel than the one punched in when using modes such as Subscribed 7. Search would sometimes show some other program in the final screen 8. Interactive Icon would freeze DVR and stop it from recording 9. Fixed pillar bars / loss of video on SD TV 10. Time line issue going back to zero when viewing a recording 11. Time line bar time stuck at end when viewing a recording 12. When viewing a recording. Skip and FF cause the recording to advance to the end and the options screen is presented. Caused by inserted commercials 13. 7232 & 7100 will become unresponsive to any key presses then eventually execute all the "stored up" key presses. 14. eSATA video playback anomalies such as pixilation and freezing that does not occur on the original live feed 15. Pause locks up when a scheduled program starts to record on the other tuner 16. When you press the Favorites button on the 2500-3, the current channel highlighted in the guide is not the one you are tuned to 17. DVR playback freezes (where trick plays dont work unless you pause, and once you pause youre stuck until soft off / on) 18. Progress indicator returns to zero on inserted commercials during recordings 19. Paused VOD + UI launch results in stuck scaled video
1.9.1 Build 14.47 New Features: 1. Air Date added to View Schedule 2. DVR xx% Full Internal - DVR xx% Full External added to non DVR (7100) 3. Added Cast in recordings program detail 4. Cast wraps on non-recorded programs eliminating
5. Added Live in the guide 6. New color change to address: Consistency, Contrast, Brightness, and overall readability 7. Icons uniform across screens/menus 8. Info Bar user selectable duration for channel changing and when Info is pressed. Info Bar Timeout = 2s, 4s, 8s, 10s, 15s. Channel Bar Timeout = 0s, 4s, 8s, 10s, 15s. 9. Series recordings and eSATA recordings on web will be available once 1.9.1 is fully deployed 10. Last button for DVR : Last button toggles between a live channel and a recording and so on. Like this one a lot. I can watch a recording. Type in a channel number and then hit Last and go back the recording. 11. Active notification for activity that would affect TV viewing and DVR recordings 12. Two simultaneous HD MRDVR streams from 7xxx DVRs 13. Clock Channel Display LED Brightness : High / Normal / Low 14. Ability to delete all Recent Deletes as well as the prior, individually 15. 7100 STB - Select a program to record and it will only show the DVR that can record without conflict. If there is a conflict then the program will set the reminder on the 7100 16. Auto Power Off will turn the box off after a user selectable time: Never, 2 hours, 3 hours, 4 hours 17. Updated Parental Control features 18. Fast forward to the end of a recording will play so that the end of the program can be seen without being missed. Play or Skip will take the recording to end. This is back from IMG 1.8 19. Program Options screen will always present from a non DVR giving the choice to Keep or Delete the just viewed recording 20. DVR - Select a program to record and it will only record on the DVR that can record without conflict. If there is a conflict then the program will set the reminder on the DVR. So yes, this will look at your DVRs and determine the one it can record on. 21. DVR Export to the Cloud - Export Series Recordings list to a Verizon Server. This will allows importing of Series Recordings list to a replacement DVR. Import will show up when you get a new DVR 22. Program Information Screen on Recordings will indicate "Upcoming Shows" for the exact same program. "More Like This" may show as well on Movies. 23. IR remote - Response has been tweaked so that there is less need to point directly at the STB. Also button presses in general on the IMG are much more responsive. 24. Parental Controls. There is now a Control VOD Sharing and Control DVR Sharing. Both allow or hide remote content. This probably also ties into #2 below. 25. Reminder warning appears 2 minutes prior to program start 26. Watching a show being recorded. If you watch a show being recorded on a box other than the DVR itself and you press Stop, there is now a resume option. 27.
Unconfirmed 1. DCT700 channel change performance (skips) 2. From (0100010 on the Vz forum) Parental Controls - Advanced : there are now options for VOD and DVR sharing. After playing with them - it prevents parentally blocked content from appearing in either the VOD My Library or the (MR)DVR lists - very cool. If I order an R rated VOD movie in my bedroom, it no longer appears under My Library in my sons room, since his set top has parental controls blocking that rating (in 1.9 it would be in the list, but he couldn't watch it since he needed the PIN, now in 1.9.1 it doesn't even show in the list.) 3.
I have not had a chance to fully test every new feature or confirm every bug fix on my 7232's and 7100. If anything is wrong, confirmed, or needs updating I will fix the list. |
|
 | Thanks so much for all of your work, nascar.
Just out of curiosity - what do you mean in bug fixes, number 9 - "fixed pillar bars." Does that mean I don't have to set the video to stretch anymore? |
|
 | reply to nascar so who's next after VHO7 and VHO8? |
|
 nascar join:2000-02-28 Verona, NJ kudos:2 | reply to bushleaguer Sure thing.
No you still do. It was an issue on and SD Set that was set to Pan & Scan for full screen HD viewing. It would not retain the mode.
said by bushleaguer:Thanks so much for all of your work, nascar.
Just out of curiosity - what do you mean in bug fixes, number 9 - "fixed pillar bars." Does that mean I don't have to set the video to stretch anymore? |
|
 | 1.9.1 just installed in VHO 8 |
|
 | reply to nascar 1.9.1 Update just completed in VOH 8. |
|
 | reply to nascar Up & running in VHO7 .. |
|
 whsbuss join:2007-08-10 Philadelphia, PA | Nothing here in yet. Still 1.9 (VH08) |
|
 | Got it here...NJ |
|
 bsangs join:2002-08-21 Montclair, NJ Reviews:
·Verizon FiOS
| reply to nascar Hit last night (VHO 7). Really not a fan of the darker color scheme, but I'll get used to it. Otherwise, not much noticeably different so far. Then again, I wasn't experiencing a lot of the issues that others were. The occasional audio/video glitch, but that was about it. Didn't lose any recordings or external drives during the upgrade btw. I've read where some others have. |
|
 whsbuss join:2007-08-10 Philadelphia, PA | reply to AVITWeb Philly suburbs here and nothing on either box (cisco DVR & STB). Did a restart and still IMG 1.9 |
|
 | said by whsbuss:Philly suburbs here and nothing on either box (cisco DVR & STB). Did a restart and still IMG 1.9 Only the Moto boxes are receiving the current 1.9.1 update. No time frame for any updates to Cisco boxes. -- REMEMBER: Stupidity should be painful !! |
|
 whsbuss join:2007-08-10 Philadelphia, PA | said by keyboards:said by whsbuss:Philly suburbs here and nothing on either box (cisco DVR & STB). Did a restart and still IMG 1.9 Only the Moto boxes are receiving the current 1.9.1 update. No time frame for any updates to Cisco boxes. Really! So VZ sends a message stating the update was coming but never indicates only Moto boxes? Typical |
|
 | reply to nascar Got it here, I do like the ability to control the length of time the info bar stays on the screen, and the LED brightness offers a nice selection. The guide is darker, but coming from both satellite services I'll get used to it quickly, just wish there was more information in the highlighted block like we had with Dish or Direct. |
|
 Mac973 join:2009-05-18 West Orange, NJ | reply to nascar I'm not a big fan of the new guide colors. Its much too dark and hard to tell where one show ends and the next begins. The channel logos are easier to see though. The LED brightness feature isn't really a big deal. It never bothered me and I can hardly tell the difference when switching from high to normal. |
|
 | reply to nascar Got the 1.9.1 this morning. I have one word to describe the new color scheme - DRAB. I liked the blue color much better and never had a hard time reading the text. Never could understand why so many people had trouble reading the text. My 56 year old eyes aren't that great and had no trouble reading the text on the old 1.9.A version.
I do like the option of changing the info bar time. I changed mine from the default 8 seconds to 2 seconds. I'm hoping this version fixed the playback problems I was having with the DVR expander. Haven't had a chance to see if the external drive works better. |
|