Did I end up with an ATM-only 2701HGV-B?

Author	All Replies
ralphus @sbcglobal.net	Did I end up with an ATM-only 2701HGV-B? I have U-Verse ADSL2+ and was trying to get away from my 2210-02, the worst modem I've ever used, and bought a cheap 2701HGV-B on eBay. It won't sync and it appears it's one of the unlabeled ATM-only 2701s. I'm posting some information from the router in order to confirm this... Hardware Version: 2700-100690-007 Software Version: 5.29.137.2 DSL Modem: 7.2.7 INF P0000-00-00T00:00:01 wave: Atheros driver version: 2.0.0 INF P0000-00-00T00:00:06 scc: SCC DMA started INF P0000-00-00T00:00:09 initd: --------------------------------------------- INF P0000-00-00T00:00:10 cm: Starting plugpull recovery on voicedev INF P0000-00-00T00:00:10 cm: Plugpull removing /disk/cm/voicedev.007 INF P0000-00-00T00:00:10 cm: Plugpull recovery complete INF P0000-00-00T00:00:11 cm: cm initialized INF P0000-00-00T00:00:11 initd: libcm started INF P0000-00-00T00:00:11 ulib: System clock initialized to Wed Aug 18 12:10:58 2010 INF P0000-00-00T00:00:11 ulib: Board serial number: 251010002054 INF P0000-00-00T00:00:11 ulib: Board product name: 2701HGV-B Gateway INF P0000-00-00T00:00:11 ulib: Device:eth1 is not available INF P0000-00-00T00:00:11 ulib: Device:hpna0 is not available INF P0000-00-00T00:00:11 ulib: Device:usbd0 is not available INF P0000-00-00T00:00:11 ulib: Device:moca0 is not available INF P0000-00-00T00:00:11 ulib: Device:moca1 is not available INF P0000-00-00T00:00:11 ulib: Device:eth2 is not available INF P0000-00-00T00:00:11 ulib: ulib initialized INF P0000-00-00T00:00:11 initd: libulib started INF P0000-00-00T00:00:11 initd: starting runlevel: 3 => 7 INF P0000-00-00T00:00:11 initd: libmif start INF P0000-00-00T00:00:11 initd: starting runlevel: 4 => 7 INF P0000-00-00T00:00:11 initd: mifd start pid:13 INF P0000-00-00T00:00:11 initd: pkg start pid:14 INF P0000-00-00T00:00:12 pkg: extracted system/system INF P0000-00-00T00:00:20 pkg: extracted ui/base_ui INF P0000-00-00T00:00:24 pkg: extracted lang/common_en INF P0000-00-00T00:00:24 pkg: extracted providerlang/att-ipdslam_en INF P0000-00-00T00:00:26 pkg: extracted providerui/att-ipdslam INF P0000-00-00T00:00:26 pkg: extracted logo/att-ipdslam_logo INF P0000-00-00T00:00:26 pkg: extracted voice/base_voice INF P0000-00-00T00:00:26 pkg: note: voice/base_voice has no uninstall script INF P0000-00-00T00:00:40 pkg: extracted config/att-ipdslam.production_config INF P0000-00-00T00:00:40 pkg: note: config/att-ipdslam.production_config has no uninstall script INF P0000-00-00T00:00:40 initd: pkgc start INF P0000-00-00T00:00:40 initd: login start pid:136 INF P0000-00-00T00:00:40 pki: pki initialized INF P0000-00-00T00:00:40 initd: pki start INF P0000-00-00T00:00:40 initd: syslogd start pid:138 INF P0000-00-00T00:00:40 initd: starting runlevel: 5 => 7 INF P0000-00-00T00:00:40 initd: lmd start pid:140 INF P0000-00-00T00:00:40 initd: starting runlevel: 6 => 7 INF P0000-00-00T00:00:40 initd: nodesd start pid:141 INF P0000-00-00T00:00:40 initd: dhcpd start pid:142 INF P0000-00-00T00:00:40 initd: named start pid:143 INF P0000-00-00T00:00:40 nodesd: process[141] started INF P0000-00-00T00:00:40 named: domainname: gateway.2wire.net INF P0000-00-00T00:00:40 named: hostname: homeportal.gateway.2wire.net INF P0000-00-00T00:00:40 initd: starting runlevel: 7 => 7 INF P0000-00-00T00:00:40 lmd: device0: dsl0 has no current version set INF P0000-00-00T00:00:40 initd: pkgc start INF P0000-00-00T00:00:40 initd: rfsd start pid:145 INF P0000-00-00T00:00:40 initd: httpd start pid:146 INF P0000-00-00T00:00:40 initd: hostapd start pid:147 INF P0000-00-00T00:00:40 httpd: process[146] started INF P0000-00-00T00:00:40 initd: voiced start pid:148 INF P0000-00-00T00:00:40 initd: System boot to runlevel 7 complete WRN P0000-00-00T00:00:40 lmd: device0: device config sync not-completed INF P0000-00-00T00:00:41 ulib: Wireless ESSID set to 2WIRE054 INF P0000-00-00T00:00:41 ulib: Wireless authentication set to WPA-PSK INF P0000-00-00T00:00:41 ulib: Wireless encryption set to TKIP INF P0000-00-00T00:00:41 ulib: Wireless channel set to 0 INF P0000-00-00T00:00:41 ulib: Wireless power set to 400 INF P0000-00-00T00:00:41 httpd: init module (hurl) INF P0000-00-00T00:00:41 httpd: init module (xslt) INF P0000-00-00T00:00:41 httpd: init module (rewrite) INF P0000-00-00T00:00:41 httpd: init module (file) INF P0000-00-00T00:00:41 httpd: init module (soap) INF P0000-00-00T00:00:41 vr: Voice router started INF P0000-00-00T00:00:41 voiced: Voice Service enabled INF P0000-00-00T00:00:41 sip: SipProtocolStart() - SIP protocol starts WRN P0000-00-00T00:00:42 lmd: qos0: unable to lookup clfy netdev ethatm0: No such file or directory WRN P0000-00-00T00:00:42 lmd: Previous log entry repeated 7 times INF P0000-00-00T00:00:42 vrsip: port 0: voice on broadband 21 INF P0000-00-00T00:00:42 lmd: qos0: added queue 0 params (dev:dsl0, qid:0, weight:40, depthb:0, depthp:0, rate:96000, burst:16000) INF P0000-00-00T00:00:42 lmd: qos0: added queue 1 params (dev:dsl0, qid:1, weight:10, depthb:0, depthp:0, rate:16000, burst:16000) INF P0000-00-00T00:00:42 lmd: qos0: added queue 2 params (dev:dsl0, qid:2, weight:10, depthb:0, depthp:0, rate:16000, burst:16000) INF P0000-00-00T00:00:42 lmd: qos0: added queue 3 params (dev:dsl0, qid:3, weight:40, depthb:0, depthp:0, rate:32000, burst:16000) INF P0000-00-00T00:00:42 lmd: qos0: added queue 4 params (dev:dsl0, qid:4, weight:10, depthb:0, depthp:0, rate:16000, burst:16000) INF P0000-00-00T00:00:42 lmd: qos0: added queue 5 params (dev:dsl0, qid:5, weight:10, depthb:0, depthp:0, rate:16000, burst:16000) INF P0000-00-00T00:00:42 lmd: qos0: added queue 6 params (dev:dsl0, qid:6, weight:10, depthb:0, depthp:0, rate:16000, burst:16000) INF P0000-00-00T00:00:42 lmd: qos0: added queue 7 params (dev:dsl0, qid:7, weight:20, depthb:0, depthp:0, rate:16000, burst:16000) INF P0000-00-00T00:00:42 lmd: qos0: added queue 8 params (dev:dsl0, qid:8, weight:20, depthb:0, depthp:0, rate:96000, burst:16000) INF P0000-00-00T00:00:42 httpd: vhost home0:0 listening on 0.0.0.0 port: 80 INF P0000-00-00T00:00:42 vrsip: port 1: voice on broadband 21 INF P0000-00-00T00:00:42 lmd: ipnet1: UP on bridge0 with 192.168.1.254/24 INF P0000-00-00T00:00:42 atm: port(58,0) attached to mad0 WRN P0000-00-00T00:00:42 lmd: device0: device config sync not-completed WRN P0000-00-00T00:00:42 lmd: qos0: admin_gen: unable to lookup clfy netdev ethatm0: No such file or directory WRN P0000-00-00T00:00:42 lmd: Previous log entry repeated 7 times WRN P0000-00-00T00:00:42 lmd: device0: device config sync not-completed INF P0000-00-00T00:00:42 voiced: traffic shaping, update uprate to 1500 WRN P0000-00-00T00:00:42 lmd: qos0: admin_gen: unable to lookup clfy netdev ethatm0: No such file or directory WRN P0000-00-00T00:00:43 lmd: Previous log entry repeated 15 times WRN P0000-00-00T00:00:43 lmd: device0: device config sync not-completed WRN P0000-00-00T00:00:43 lmd: qos0: admin_gen: unable to lookup clfy netdev ethatm0: No such file or directory WRN P0000-00-00T00:00:43 lmd: Previous log entry repeated 7 times INF P0000-00-00T00:00:43 lmd: device0: dsl0 has no current version set WRN P0000-00-00T00:00:43 lmd: qos0: admin_gen: unable to lookup clfy netdev ethatm0: No such file or directory WRN P0000-00-00T00:00:43 lmd: Previous log entry repeated 15 times INF P0000-00-00T00:00:44 vr: Hybrid_EC(0x43c12244): flags setting: f INF P0000-00-00T00:00:44 intpot: Failover state on port 0 changing from 0 to 2 INF P0000-00-00T00:00:45 vr: Hybrid_EC(0x43c15ca8): flags setting: f INF P0000-00-00T00:00:45 ulib: Node 0 Added mac:00:1f:d0:d7:cd:ed INF P0000-00-00T00:00:45 intpot: Failover state on port 1 changing from 0 to 2 INF P0000-00-00T00:00:46 lmd: device0: dsl0 has no current version set WRN P0000-00-00T00:00:46 lmd: qos0: admin_gen: unable to lookup clfy netdev ethatm0: No such file or directory WRN P0000-00-00T00:00:47 lmd: Previous log entry repeated 15 times INF P0000-00-00T00:00:47 lmd: device0: dsl0 has no current version set WRN P0000-00-00T00:00:48 lmd: qos0: admin_gen: unable to lookup clfy netdev ethatm0: No such file or directory WRN P0000-00-00T00:00:48 lmd: Previous log entry repeated 15 times INF P0000-00-00T00:00:48 httpd: vhost home0:2 listening on 0.0.0.0 port: 443 INF P0000-00-00T00:00:48 httpd: vhost home0:1 listening on 127.0.0.1 port: 80 INF P0000-00-00T00:00:48 httpd: vhost home0:0 down on 0.0.0.0 port: 80 INF P0000-00-00T00:00:48 httpd: vhost home0:2 down on 0.0.0.0 port: 443 INF P0000-00-00T00:00:48 httpd: vhost home0:0 listening on 192.168.1.254 port: 80 INF P0000-00-00T00:00:50 named: listen on address[0]: 192.168.1.254 INF P0000-00-00T00:00:54 httpd: vhost home0:2 listening on 192.168.1.254 port: 443 WRN P0000-00-00T00:01:54 lmd: qos0: admin_gen: unable to lookup clfy netdev ethatm0: No such file or directory WRN P0000-00-00T00:01:54 lmd: Previous log entry repeated 15 times INF P0000-00-00T00:01:54 atm: port(58,0) attached to mad0 INF P0000-00-00T00:02:00 system: memfs: compression completed Is there any way I can avoid an ATM-only model if I attempt to get a working HGV-B? I know it's garbage, but my only alternative is the equally-bad-or-worse 2210-02.
	to forum · permalink · 2011-11-05 19:03:04 ·
wayjac Premium,MVM join:2001-12-22 Indy	Have a look at this thread »How to change equipment on IP-DSLAM HSI?
	to forum · permalink · 2011-11-06 12:28:06 ·

ralphus @sbcglobal.net	Great, I can't find that firmware update though... Having it pushed is obviously out of the question since I can't sync. Where can I download the firmware that will allow my 2701 to sync?
	to forum · permalink · 2011-11-06 16:35:41 ·
ILpt4U Premium join:2006-11-12 Lisle, IL kudos:4	Were you able to find the firmware?
	to forum · permalink · 2011-11-07 08:57:37 ·
ralphus @sbcglobal.net	Yep, I'll report back on my success/failure.
	to forum · permalink · 2011-11-07 16:00:58 ·
farren join:2004-04-20 Little Rock, AR	Worked perfectly! Thanks all! (same user as above--not sure how I ended up posting anonymous here while posting logged in on the U-Verse forum)
	to forum · permalink · 2011-11-10 19:41:17 ·

Equipment Support > Hardware By Brand > 2Wire > Did I end up with an ATM-only 2701HGV-B?