jerry666
Premium
join:2002-12-12
Sainte-Anne-Des-Lacs, QC
clubs: | reply to BillinNY
Re: WNDR3700 - Problems
my modem is3 feet away , put it closer , not seeing any interference . But you never know , every setup is different |
|
BillinNY
join:2002-04-09
Hyde Park, NY
1 edit | I have seen zero interference from my modem which is inches away from the router.
OH, gained 1 bar on my 5G connection by placing the router in the stand! Router is 18' from my laptop and their is a hollow core wooden door in the path. |
|
BillinNY
join:2002-04-09
Hyde Park, NY
1 edit | reply to Wikkedfin
Internet Traffic Meter is NOT allowing me to select/Enable Traffic Meter. ?? I'm running out of the box firmware ver. V1.0.4.31NA .
USB Device connected to the USB port seems to work aok. I have used two different thumb drives. One USB2.0 and one older USB1.0 and both worked well. (so far?)
Just tried my Western Digital Passport 160 USB drive and it is works fine also. |
|
RemyL75
join:2001-06-07
Chicago, IL
| said by BillinNY  :Internet Traffic Meter is NOT allowing me to select/Enable Traffic Meter. ?? I'm running out of the box firmware ver. V1.0.4.31NA . Internet Traffic Meter doesn't work for Cable Internet with the stock firmware. To use that feature, you have to upgrade the firmware to the beta version, 1.0.4.35NA |
|
BillinNY
join:2002-04-09
Hyde Park, NY | I'm going to steer clear of the beta firmware as I have heard it is problem ridden. |
|
BillinNY
join:2002-04-09
Hyde Park, NY
1 edit | reply to Wikkedfin
Setup my WNDR3700 Router yesterday. Ran into something today and hopefully one of you has a quick answer.. 8-)
My son came over with his XP laptop and we attempted to connect to my Netgears 2.4. While trying to connect XP pops up with the following message "Windows was unable to find a certificate to log you on to the network NETGEAR2.4".
Anyway, the correct WEP key was typed on but this message kept showing and we were unable to connect to 2.4. I then proceeded to setup guest network b,g,n with WEP. Well, my sons laptop connected to that without an issue?? SO, apparently 2.4 has a setting that prevented connection and I need to change that setting or what?? Assist please..
Reply With Quote |
|
BillinNY
join:2002-04-09
Hyde Park, NY | I think this may be the cure for my above issue..
»helpdeskgeek.com/how-to/windows-···network/ |
|
staticfree6
join:2002-08-03
United State
| reply to jerry666
said by jerry666 :do you have it on the stand ? Hi, yes, I have it on its stand, standing up. It is most likely the tight spot I have it situated in. |
|
banditz71
Premium
join:2001-04-03
Aubrey, TX
 ·Speed of Light Bro..
|  reply to Wikkedfin
No problems here with the latest firmware (.35)......also, attached USB HD works fine as well....but noticeably slower than when connected directly to the computer.
Very satisfied so far.........
*************************************************
--
Athlon 64 X2 4200+ / 2GB RAM , Speed of Light Broadband (Wireless) (Home) / Embarq DSL (Work) , Network= 9 computers running WinXP(SP3), Netgear Routers Home & Work, Firefox 3.5.5, Thunderbird 2.0.0.**pre
|
|
Finalrinse
join:2004-10-23
Flat Rock, MI | reply to Finalrinse
It's been 20 days, still going strong! |
|
Finalrinse
join:2004-10-23
Flat Rock, MI
| reply to Finalrinse
said by Finalrinse :Update- I just flashed back to V1.0.4.31NA. I will post as soon as I have a lock-up. Hopefully I won't have to post It's been 20 days, still going strong! |
|
