Netopia 3347-02: how to setup FTP with PASV (passive)

Author	All Replies
spec1alk @rightnow.com	Netopia 3347-02: how to setup FTP with PASV (passive) I have Qwest Broadband DSL and the Netopia 3347-02 modem. My software version is QM01-7.7.4r10. I have a server on my home network that is running and FTP server. This FTP server is setup to use passive mode on ports 5700-5799). I setup a NAT rule to forward 5700-5799 to the proper machine, but when I try to connect from the internet, passive mode does not work. If I use the same machine (laptop) while connected to the home network, passive mode works fine. This is what the "Details" of the NAT rule looks like: Service Name *FTP PASV Protocol TCP Global Port Range 5700 - 5799 Base Host Port 5700 Is this setup properly?
spec1alk @rightnow.com	to forum · permalink · 2009-10-16 14:32:20 ·
public join:2002-01-19 Santa Clara, CA ·DSL EXTREME	said by spec1alk : This is what the "Details" of the NAT rule looks like: Service Name *FTP PASV Protocol TCP Global Port Range 5700 - 5799 Base Host Port 5700 You still need to forward port 21
public join:2002-01-19 Santa Clara, CA ·DSL EXTREME	to forum · permalink · · 2009-10-18 05:46:47 ·
spec1alk @rightnow.com	reply to spec1alk I also have NAT rules to forward ports 21 and 990.
spec1alk @rightnow.com	to forum · permalink · 2009-10-19 15:24:43 ·


Friday, 27-Nov 17:42:57	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com.republican-creole page compression OFF