paranoi7
join:2008-01-17
| Linksys SPA 2102 ATA
I just got a hand on a Linksys SPA 2102 ATA adapter and I am having trouble accessing its setup page. How do get into the admin setup? Do I need to unlock it first? I tried following some of the instructions that I found, (connecting, calling #### and password) but they didn't work.
Any help is much appreciated. |
|
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA
| What does Customization field on Info page show on your device? If it shows Customized, then the device is factory locked to specific VoSP. In this case, you need to contact DogFace05 to have your device un-customized, a.k.a completely unlocked. |
|
deheza
join:2004-06-10
Allen, TX |  reply to paranoi7
Have you tried setting IVR command 7932 to 1? |
|
paranoi7
join:2008-01-17 | reply to mazilo
I can't get into the setup page. I connect phone line, PC and modem but 192.168.0.1 gets me nowhere...
How do I get to the admin page?
Thanks! |
|
SteveinNC
join:2007-07-19
Greensboro, NC
| reply to paranoi7
Google unlocking linksys spa2102
This may help too
»www.youtube.com/watch?v=vlTiA-UbmlY |
|
paranoi7
join:2008-01-17
| I'll give it a try one more time. I found the following instructions as well... When I connect ata, modem, pc and phone and pick up the phone, it is dead because there is no connection, right? Am I supposed to just dial as per instructions below and get the response???
On the Linksys, web admin access is disabled. To enable it, pick up phone, dial **** then 723646# , when asked for password, dial 78778839# , when asked for value dial 1# then dial 1 to save.
Then, go to »192.168.0.1/admin/voice/advanced , enter user and password. |
|
SteveinNC
join:2007-07-19
Greensboro, NC
1 edit | reply to paranoi7
Google unlocking SPA 2102
Read the links on the first page. There are several versions, passwords, etc on how to proceed.
I had to go through this when I unlocked my SunRocket Gizmo to work with other voip services.
I now have a SPA 2102 I bought new. To your question about what you hear on the phone prior to entering codes I'm not sure and can't get to my ata at the moment.
Read the Google page. |
|
Dan_voip
join:2007-01-03
Canada
| reply to paranoi7
said by paranoi7  :On the Linksys, web admin access is disabled. To enable it, pick up phone, dial **** then 723646# , when asked for password, dial 78778839# , when asked for value dial 1# then dial 1 to save. Then, go to »192.168.0.1/admin/voice/advanced , enter user and password. You might need to disconnect WAN cable and try that procedure after. |
|
paranoi7
join:2008-01-17 | Still no luck. I get no response when I dial **** |
|
paranoi7
join:2008-01-17 | reply to paranoi7
When I dial **** i now get a female voice, however 78778839 doesn't work as a password, she says "invalid". I dialed option 110#, i get 216.254.112.110 but this url still doesn't get me to the admin page...
What do I do? |
|
DogFace05
join:2005-12-09
Cary, NC
| The unlocking instructions you find on the Internet are only applicable for adapters from specific providers. They are all based on prior knowledge of certain characteristics (eg, weaknesses) of or settings (usually leaked passwords) in the configurations provisioned into their adapters by said providers. None of the methods are generally applicable to any arbitrary provider's adapters.
The password 78778839 is only relevant to SPA2102s provisioned by Sunrocket during a specific time period while they were in operation. At the time of Sunrocket's demise, the company was already provisioning these adapters with a completely different password. Furthermore, the factory reset default password in SR's SPA2102s is yet another value, one that is so long that it cannot be entered by IVR.
In any case, you'll only be able to unlock your SPA2102, following instructions devised for Sunrocket SPA2102s, if and only if you have a Sunrocket locked SPA2102. You will have to determine if that is the case with your adapter.
To do that, you need to browse to the adapter's user level pages at its LAN side IP address, from a computer connected into its LAN port (yellow, labeled "Ethernet"). You'll obtain the SPA2102's LAN side IP address by entering the IVR, and dialing 210# (not 110#, which reports its WAN side IP).
If you have a Sunrocket SPA2102, you should be taken right into the basic user level page by browsing to its LAN side IP address. There, under the Info tab, look for the "Customization" field. If it shows "Sunrocket", you have a Sunrocket customized adapter, in which case you should be able to unlock it with the video instructions, or the Live-CD method.
If not, and you intend to unlock it yourself, your only alternative is to find instructions specifically devised for SPA2102s from the provider to whom it's locked. You may be able to identify a provider by looking for a suffix to the SPA2102 model name. For example, if it's labeled SPA2102-AN, it will be a unit from ACN Digital. Although the most common source of SPA2102s is the now defunct Sunrocket, there are many other providers who have supplied or currently supply this adapter. |
|
garys_2k
join:2004-05-07
Farmington, MI
 ·Future Nine Corpor..
·Vonage
1 edit | reply to paranoi7
Allow me to tell you that DogFace05 can also provide an unlocking service (not free, but all reports are that it is reasonable and works very well) if you can't get it yourself. You'll have to PM him to set it up to have it done, forum rules prohibit soliciting business.
I've never been DF05's customer and likely won't be (I don't plan on purchasing any locked adapters) but it's pretty clear that he can apply a bulletproof unlocking to the Linksys devices.
Edit to fix a mipsellings. |
|
paranoi7
join:2008-01-17 | reply to DogFace05
I did a user reset so under 210 option i get 0.0.0.0 so i can't get into LAN IP address. What do I do next? |
|
DogFace05
join:2005-12-09
Cary, NC
| Looks like it's been configured for bridged mode then, so the LAN port is now actually collocated with the WAN port. If that's the case, you'll have to access it at the WAN IP (and hope that the web interface is enabled there). Dial IVR command 170# to find out what port the web interface is listening at (if at all). Then try browsing to http://wanip:port, where you replace wanip with the IP reported by IVR command 110# (216.254.112.110, if still the same as in one of your posts), and port with the port number reported by 170#. |
|
paranoi7
join:2008-01-17 | The 110# command gives me 0.0.0.0 now - can I use that as a wanip? |
|
Kaetss
@comcast.net
| reply to paranoi7
Here are codes you can use on the device (hit the pound key after the option):
Check DHCP 100
Enable/Disable DHCP 101
Check IP address 110
Set IP address 111 (use * for period)
Check Network Mask 120
Set Mask 121
Check Gateway 130
Set Gateway 131
Check MAC 140
Check Firmware version 150
Check DNS 160
Set DNS 161
Check Web Server Port 170
Enable/Disable Web Server 7932 (may require password)
Manual Reboot 732668
User Factory Reset (only changes user settings) 877778
Factory Reset (all non default settings change) 79738
Hope this helps. I use these in a private network environment. |
|
DogFace05
join:2005-12-09
Cary, NC
| reply to paranoi7
said by paranoi7 :The 110# command gives me 0.0.0.0 now - can I use that as a wanip? No, that's not a valid IP. It means your WAN port has not obtained an IP address from any DHCP server on your network. BTW, was it (the WAN port) unplugged when you dialled 110#. You need to have it plugged in to a network segment where there is an active DHCP server to hand out an IP address to it. Alternatively to DHCP, you can assign it static IP settings via IVR. To do that, you need to issue the following IVR commands:
1) 101#1#1 - Select static settings (vs DHCP)
2) 111#192*168*1*2#1 - Replace 192*168*1*2 with an
IP address appropriate to your
LAN. |
|
paranoi7
join:2008-01-17
| well, I was able to reset the ip address to 192.168.1.2 using the 111# function but the webserver seems to be disabled. Option 100# reads me back: staticip. option 101# asks for a password which I don't know and I can't get to the admin... really appreciate your help, thanks. |
|
paranoi7
join:2008-01-17 | my model reads spa 2102 at the bottom, without -r. is there any way to figure out if this is skyrocket? Is this different from spa 2102-r? |
|
DogFace05
join:2005-12-09
Cary, NC
| reply to paranoi7
said by paranoi7 :well, I was able to reset the ip address to 192.168.1.2 using the 111# function but the webserver seems to be disabled. Option 100# reads me back: staticip. option 101# asks for a password which I don't know and I can't get to the admin... really appreciate your help, thanks. What did 170# report? |
|
