Straphanger
Express is Back
Premium,Mod
join:2001-12-08
Jackson Heights, NY
clubs:
 ·RoadRunner Cable
Host:
TV over IP
New York
Audio/Video Chat
| reply to Ugly
Re: [CPU fan connector] Zalman CNPS9500A - missing a pin?
Fan speed can be found in your BIOS or through several Windows apps, such as SpeedFan or Everest.
The 2000RPM figure is the level I'm comfortable with in my systems, which are equipped with the Zalman 7500. It's the level I'm comfortable with, noisewise.
Adjust the FanMate and see what fan level suits your taste.
--
Please use all available doors...you have 33 to choose from. |
|
Ugly
Fishy Cool Bird
join:2001-12-12
The Meadow
·Comcast
| reply to Straphanger
said by Straphanger  :The FanMate is optional but I keep it connected to all my Zalman heatsinks. Otherwise, they all run at full speed, which is terribly noisy. The BIOS will not be able to automatically adjust the Zalman's fan speed. With the FanMate, I just turn the knob until the fan hits an acceptable 2000RPM and leave it alone. OK, please do not think I am being snide here.
Yet I ask, please, how do you know the RPMs?
Or is this just a rough estimate? And how does 2000RPM figure?
Is that just a convenient number you happen to like, or a recommendation by some authorative source for a sufficient fan speed to maintain good cooling in all conditions?
Thank you for a fine post and for any kind reply to my n00bish questions.
Best regards,
Ugly
--
Oh, I love the smell of fish. Guts, rotten, it's all good. |
|
Straphanger
Express is Back
Premium,Mod
join:2001-12-08
Jackson Heights, NY
clubs:
·RoadRunner Cable
Host:
TV over IP
New York
Audio/Video Chat
| reply to Ugly
The FanMate is optional but I keep it connected to all my Zalman heatsinks. Otherwise, they all run at full speed, which is terribly noisy. The BIOS will not be able to automatically adjust the Zalman's fan speed. With the FanMate, I just turn the knob until the fan hits an acceptable 2000RPM and leave it alone.
--
Please use all available doors...you have 33 to choose from. |
|
Ugly
Fishy Cool Bird
join:2001-12-12
The Meadow
·Comcast
| reply to signmeuptoo
said by signmeuptoo :It's not that, your fan is a PWM fan (pulse width modulation), look it up on wikipedia. Many new boards use PWM fans for the CPU so that the fan speed can be regulated by the board. It's a good, quiet, dependable way to regulate fan speed. I am a n00b. And I apologize. Yet I do not understand.
Yes, the idea that one can control power by changing the duration of the full-ON pulse (PWM) makes perfect sense.
• But the FanMate, is that optional or not, please?
If, as you say, the mobo may control the fan; then why would I presume to interfere via the knob?
Sounds redundant to me!
--
Oh, I love the smell of fish. Guts, rotten, it's all good. |
|
sdgthy
@optonline.net
 from:
Ugly
| reply to Ugly
I've seen it as an option is the BIOS. That did apply to all MB connected fans though. The 3 pin and 4 pin fans control speed differently, so it's not quite as simple as swapping one for the other. |
|
signmeuptoo
Folding and Crunching Not just Breakfast
Premium
join:2001-11-22
LOSTinSpace
clubs:
 ·Future Nine Corpor..
 ·AT&T Southeast
| reply to Ugly
It's not that, your fan is a PWM fan (pulse width modulation), look it up on wikipedia. Many new boards use PWM fans for the CPU so that the fan speed can be regulated by the board. It's a good, quiet, dependable way to regulate fan speed.
--
Join Teams Helix and Discovery. Put that fancy computer to good use helping to find a cure, your mom will love you for it. »Team Helix »Team Discovery |
|
Ugly
Fishy Cool Bird
join:2001-12-12
The Meadow
·Comcast
| reply to Straphanger
Let's say if one does not like the "FanMate2," can one just plug the (very same three-pin connector as the FanMate) fan DIRECTLY into the CPU_FAN connector and live happily without the fancy fan-speed-control?
Honestly, if it works just as well in cooling without FanMate2, what's the point of continuous adjustment via a knob?
--
Oh, I love the smell of fish. Guts, rotten, it's all good. |
|
Straphanger
Express is Back
Premium,Mod
join:2001-12-08
Jackson Heights, NY
clubs: | reply to Ugly
The fourth pin allows for fan speed control. This is not necessary on Zalman heatsinks because they include the FanMate2 for fan control.
--
Please use all available doors...you have 33 to choose from. |
|
Ugly
Fishy Cool Bird
join:2001-12-12
The Meadow
·Comcast
| There's one fewer (female) connector pin (three) from the Zalman CNPS9500A CPU cooler than the Gigabyte mobo (four) is expecting.
What's the (missing) forth pin-hole for, please? Was it intended for a RPM sensor perhaps?
(the photo is from mobo manual. the actual is missing where I have blacked out)
Thanks, Ugly
--
Oh, I love the smell of fish. Guts, rotten, it's all good. |
|
