Can PSU cable be used on printer? in Computer Hardware Help http://www.dslreports.com/forum/r22610654 en Fri, 27 Nov 2009 11:11:48 EDT Fri, 27 Nov 2009 11:11:48 EDT Re: Can PSU cable be used on printer? http://www.dslreports.com/forum/remark,23131664 tacsplace : Someone else mentioned this...

The printer being new... check for a piece of tape restricting movement or something similar going on.

Might just solve your problem. ;)

Also, did you remove the plastic pull strip from the toner before installing it?

Is there paper in it?

The above two things can cause the printer to start normal then give the error light.]]> http://www.dslreports.com/forum/remark,23131664 Sun, 04 Oct 2009 20:35:49 EDT Re: Can PSU cable be used on printer? http://www.dslreports.com/forum/remark,23104365 fartness : I will try that.

Most places I've dealt with will send a pre-paid box for items under warranty.

EDIT: Just tried it. The lights went on how it should but then I got the red warning light a second later.]]> http://www.dslreports.com/forum/remark,23104365 Tue, 29 Sep 2009 22:22:21 EDT Re: Can PSU cable be used on printer? http://www.dslreports.com/forum/remark,23104352 dipweed23 : Take it to the other end of the house, different room, kitchen, whatever. Different outlet on the same circuit is likely causing the voltage drop, and they freak out thinking the power browned out.
Laser printers smell funny the first couple times the fuser fires up, same with replacement fusers (not to be confused with the protection fuse). If it was truely messed up inside and shorted out, it should blow it's internal fuse.

I'd seriously recomend this: Take the printer to the kitchen, unplug the microwave, plug the printer in there. If you smell burning/see smoke unplug it and fetch your packing material so you can return it as defective.
If you don't have packaging, you are SOL. I don't understand WHY people throw packaging away before even testing something first. I keep mine until warranties are expired (although broken down and neatly stored).]]> http://www.dslreports.com/forum/remark,23104352 Tue, 29 Sep 2009 22:19:26 EDT Re: Can PSU cable be used on printer? http://www.dslreports.com/forum/remark,23104146 fartness : I plugged into the wall and still no luck. My battery backup that was plugged into the other socket of the same outlet tripped too when I turned the printer on.]]> http://www.dslreports.com/forum/remark,23104146 Tue, 29 Sep 2009 21:32:11 EDT Re: Can PSU cable be used on printer? http://www.dslreports.com/forum/remark,22710516 fartness : Since I smelled something funny from the printer but it will still turn on, should I use it still?]]> http://www.dslreports.com/forum/remark,22710516 Wed, 15 Jul 2009 08:20:38 EDT Re: Can PSU cable be used on printer? http://www.dslreports.com/forum/remark,22707367 anon : Laser printers do not get plugged into battery backup except for entertainment purposes. ;)
Ok, exceptions for large backup supplies.

If a cable is UL CE or whatever listed it, has correct capacity on it, and not a fake should be fine. So for example replacing a 10 amp cable with a 10 amp cable should work. I do not think their is a surge rating on cables. Like 10 amps normal 15 surge for one cable 10 amps normal 12 amps surge for another . So a 10amp cable should be a 10amp cable. If one can take x surge so should the other. If designed correctly. For normal household uses.
Like older fuses you could get slow blow or quick blow. One took longer to react to overload. You do not go into a store and say I need a 10amp power cord slow blow. ]]> http://www.dslreports.com/forum/remark,22707367 Tue, 14 Jul 2009 16:07:00 EDT Re: Can PSU cable be used on printer? http://www.dslreports.com/forum/remark,22704532 Sweet Witch : I have the same printer and it's got an incredible draw! When I first connected it to the battery backup, it shut down my computer so I now have it rigged to a serparate circuit. At my old house it would flicker the lights if on the same circuit as the computer.

BTW, it comes with a power cable so you must have lost yours.
--
"While you can teach an old dog new tricks, you simply can't teach him to be a cat."

"Are you my Mummy?"]]> http://www.dslreports.com/forum/remark,22704532 Tue, 14 Jul 2009 08:32:18 EDT Re: Can PSU cable be used on printer? http://www.dslreports.com/forum/remark,22653571 renton : Too thick is not a problem, too thin is.]]> http://www.dslreports.com/forum/remark,22653571 Sat, 04 Jul 2009 12:05:53 EDT Re: Can PSU cable be used on printer? http://www.dslreports.com/forum/remark,22653410 fartness : I have a REALLY thick cable from a 700W PSU, can I use that, or is it too thick?]]> http://www.dslreports.com/forum/remark,22653410 Sat, 04 Jul 2009 11:02:59 EDT Re: Can PSU cable be used on printer? http://www.dslreports.com/forum/remark,22648451 fsmartin1 :
said by fartness See Profile :

I just tried it and my battery backup started freaking out and it caused my other battery backups to kick in for a second. There's a red warning light on the printer, so it doesn't work... my computer recognized the printer though.
My APC UPS manual tells me not to plug printer type periphals into the back up side of the UPS. This has something to do with the power saving features of printers.]]> http://www.dslreports.com/forum/remark,22648451 Fri, 03 Jul 2009 03:30:29 EDT Re: Can PSU cable be used on printer? http://www.dslreports.com/forum/remark,22647301 hurfy : We had a post about substandard power cables awhile back i believe. All those 'equivalent' cables may not be what they appear to be.

Find another cable. Perhaps swap the ones you have in a pinch. Maybe it is the cable that is fried not the printer.

I cut open one of mine that felt kinda 'puny'. Even tho it said 125v 10A on it there was no way any of us that looked at it were willing to run that much juice thru what appeared to be 24g wire if that! It certainly was NOT the 18g it claimed to be.

I have enough that grabbing a handful to compare works. With only a cable or two it may be hard to tell. Find a known heavy duty one and cop a feel ;)

Lasers should have the original cable to be sure, they are probably less likely to have skimped on the supplier for cable. If it is newer they may just send you one. A 350w PSU can probably get by on the substandard ones.

oops, even i can't tell easily. Just cut a good one cause i didn't seem to save that bad example :( Think i already tossed all the suspicious ones here.

PS: My HP color laser says 110-127v and 6.8a and has a noticably heavier (marked 14g instead of 18g) cable than anything else so yours has a fairly healthy draw.]]> http://www.dslreports.com/forum/remark,22647301 Thu, 02 Jul 2009 20:56:01 EDT Re: Can PSU cable be used on printer? http://www.dslreports.com/forum/remark,22636569 Aframe : If this is a brand new printer, are you sure that there isn't some sort of packing inside the printer that needed to be removed? It might has locked up some moving parts and thereby caused the overload. Happened to me once on a sharp laser. :(
--
HN9000/Spaceway III,74m/1w,Elite package,XP Pro,]]> http://www.dslreports.com/forum/remark,22636569 Tue, 30 Jun 2009 19:36:18 EDT Re: Can PSU cable be used on printer? http://www.dslreports.com/forum/remark,22635977 Jahntassa : The one you had it plugged into probably went into a protect mode, while the other batteries most likely turned on due to the voltage drop from the printer.

Keep in mind the printer is trying to pull 5~7 amps, most likely on a 15 amp circuit. If you have a lot of equipment in the room you're putting it in you may want to see if you can relocate it to another circuit altogether.

The batteries are probably fine. If you want to test it, run the self-test on the UPS (if it has one) or unplug it from a wall to see if it still responds normally]]> http://www.dslreports.com/forum/remark,22635977 Tue, 30 Jun 2009 17:29:26 EDT Re: Can PSU cable be used on printer? http://www.dslreports.com/forum/remark,22635279 R4M0N : My guess is that they went on battery backup because the Laser printer was overloading the circuit.

The Laser printer probably did not do any damage to the UPS this time.

Try taking the printer to another part of the house so you can plug it into another circuit and test there with a laptop or the printer's internal test page.]]> http://www.dslreports.com/forum/remark,22635279 Tue, 30 Jun 2009 15:13:32 EDT Re: Can PSU cable be used on printer? http://www.dslreports.com/forum/remark,22634842 fartness : The UPS still works, do you think it's ok or damaged?

What about my other UPS's that were plugged into a different wall outlet, but most likely on the same circuit? Could those have been damaged as well? They went on battery backup each time I turned the laser printer on.]]> http://www.dslreports.com/forum/remark,22634842 Tue, 30 Jun 2009 13:56:23 EDT Re: Can PSU cable be used on printer? http://www.dslreports.com/forum/remark,22634772 Jahntassa : Laser printers require high amperage to startup and print, (most) battery backups are not designed to provide the kind of instant power that lasers need, and you can easily damage the circuitry of the UPS by connecting one to it. Most UPSs have explicit instructions NOT to connect a laser printer.

As far as the printer error, the manual for it is here: »downloadcenter.samsung.com/conte···lish.pdf

Start on page 36 of the PDF for troubleshooting.]]> http://www.dslreports.com/forum/remark,22634772 Tue, 30 Jun 2009 13:45:58 EDT Re: Can PSU cable be used on printer? http://www.dslreports.com/forum/remark,22634659 fartness : The first time I tried the battery side, then I tried the surge side. Same results.

Why can't I do that, and what damage did I likely do? The printer still turns on but it smells and doesn't seem to work (warning light).]]> http://www.dslreports.com/forum/remark,22634659 Tue, 30 Jun 2009 13:25:52 EDT Re: Can PSU cable be used on printer? http://www.dslreports.com/forum/remark,22633721 Jahntassa : Seeing as that is a laser printer, I really hope you didn't plug it into the Battery side of that battery backup.

NEVER plug a laser printer into a battery backup unless you plug it into the 'surge only' side of the battery. If you plug the printer directly into the wall it should work fine.

Any standard power cable would work fine. There's no way the power cable itself caused a problem unless it was faulty.]]> http://www.dslreports.com/forum/remark,22633721 Tue, 30 Jun 2009 11:19:29 EDT Re: Can PSU cable be used on printer? http://www.dslreports.com/forum/remark,22633130 fartness : It was a brand new printer. The cable was from an Antec Basiq 350W PSU. What would have caused the battery backup to freak and the other battery backups plugged into different outlets to freak?

It's a Samsung ML 2510, btw.]]> http://www.dslreports.com/forum/remark,22633130 Tue, 30 Jun 2009 10:01:01 EDT Re: Can PSU cable be used on printer? http://www.dslreports.com/forum/remark,22632944 R4M0N : Either you plugged the power cable wrong (highly improbable) or that printer died of natural causes... ]]> http://www.dslreports.com/forum/remark,22632944 Tue, 30 Jun 2009 09:26:33 EDT Re: Can PSU cable be used on printer? http://www.dslreports.com/forum/remark,22632848 renton : Is this a brand new printer?
This didn't happened because of the power cable.]]> http://www.dslreports.com/forum/remark,22632848 Tue, 30 Jun 2009 09:00:50 EDT Re: Can PSU cable be used on printer? http://www.dslreports.com/forum/remark,22632683 fartness : Yeah, that totally toasted the printer. Smells burning.]]> http://www.dslreports.com/forum/remark,22632683 Tue, 30 Jun 2009 08:21:11 EDT Re: Can PSU cable be used on printer? http://www.dslreports.com/forum/remark,22632665 fartness : I just tried it and my battery backup started freaking out and it caused my other battery backups to kick in for a second. There's a red warning light on the printer, so it doesn't work... my computer recognized the printer though.]]> http://www.dslreports.com/forum/remark,22632665 Tue, 30 Jun 2009 08:13:42 EDT Re: Can PSU cable be used on printer? http://www.dslreports.com/forum/remark,22614742 Kilroy : Provided the cable fits, yes.]]> http://www.dslreports.com/forum/remark,22614742 Fri, 26 Jun 2009 11:36:25 EDT Re: Can PSU cable be used on printer? http://www.dslreports.com/forum/remark,22611536 renton : Yup.]]> http://www.dslreports.com/forum/remark,22611536 Thu, 25 Jun 2009 19:48:14 EDT Can PSU cable be used on printer? http://www.dslreports.com/forum/remark,22610654 fartness : Either my printer did not come with a cable or I threw it away. That's a whole different story. Anyway, I have a PSU cable that says 125V 10A on it. The printer says 110V to 127V and 5.5A on it.

Can I use the cable?]]> http://www.dslreports.com/forum/remark,22610654 Thu, 25 Jun 2009 17:30:49 EDT