Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
clubs:
| reply to anomynous
Re: DSL - most flexable/configurable DSL modems?
said by anomynous :... Have been trying various google searches; so far have found » www.usr.com/support/8550/8550-ug/three.htmlwhich allows one to explicitly choose between Multi-mode (default) G.DMT (G.992.1) G.Lite (G.992.2) ANSI T 1.413 Issue 2 You can do that with any modem (as long as they support Multi-mode) using their Telnet interface.
My Speedstream does that.
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time? |
|
anomynous
@rr.com
| said by Doctor Olds  :You can do that with any modem (as long as they support Multi-mode) using their Telnet interface. My Speedstream does that. Now we're getting somewhere!
As far as I can determine my Westell 6100 does not have a telnet interface nor does it permit these sorts of changes via the web interface.
What "speedstream" in particular do you have, and
do you consider it to be one of the more flexible /configurable modems, and
are there other modems that are considered particularly strong in this aspect?
Thanks! |
|
Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
clubs:
| The Westell 6100 supports many DSL Standards, and it will usually connect with what the DSLAM is offering it first time. The DSLAM tries its preferred choice first (depending on the DSLAM and it's default settings) which could be G.DMT or ADSL2+ or any other like ANSI T1.413 Modulation.
I'm using a Speedstream 4200 Modem/Router with a Linksys 10/100 Multi-port Switch to support my 7 PC LAN (no other Router as the 4200 is a Router). It was supplied to a Windstream customer that I purchased off of eBay.com for under $15.00 shipped. It is a 4200 D246 Model which is the newer Windstream version instead of the older 4200 D242 version from Windstream.
This thread below shows the Model/Part Numbers Info on the Windstream 4200s.
»which of these modems is the newest?
I had to unlock the Telnet server as the Windstream 4200 has it blocked/locked. It is pretty easy to change/enable that. The unlock uses the same procedure that works on the 5200.
»A50 FW on 5200, no telnet or FTP !!!
HTH
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time? |
|
