ricosuave
join:2009-06-17
Mapleton, UT
| reply to Willy
Re: [DVR] Remote Control Issue
said by Willy  :There's something to it, because it's real and happening to me, but I don't understand it. But ricosuave suggestion seems to be working for me. Glad to hear it.  |
|
VZ_Laird
join:2008-10-08
Palm Harbor, FL | reply to birdfeedr
are you still running into this problem? |
|
Willy
Premium
join:2000-09-24
USA
 ·Verizon FIOS
 ·Optimum Online
| reply to EMC2
There's something to it, because it's real and happening to me, but I don't understand it.
But ricosuave suggestion seems to be working for me. |
|
EMC2
join:2007-08-21
Tampa, FL
·Verizon FIOS
| reply to N O Y B
My understanding is some CFL lcd tvs and some plasma displays produce some type of "glare" (for lack of another word) as a byproduct of their operation. Some of the early boxes in the 7xxx series don't have as good of an IR filter as the 6xxx series did. The "glare" from the display may mask the stb receiver from accurately detecting an inbound IR signal.
Fact or fiction - urban legend - man or myth -- don't know.
Don't have a degree in EE, physics, et al. Just what I've heard ... 
I'm sure we have some students of the electromagnetic spectrum that can also weigh in on this -- shed some light (pun intended)  |
|
Willy
Premium
join:2000-09-24
USA
·Verizon FIOS
·Optimum Online
| reply to N O Y B
said by N O Y B :said by EMC2 :Long story short - a juiced up TV display setting may contribute to blocking the IR signal from remote to stb. Could you explain for me the IR remote control interference caused by juiced up TV display. That's what I don't understand, how can the order you put the TV and STB make a difference?
I can literally put the remote inches away from the STB and get no response, yet when everything is on and running, the remote works fine from across the room if I point it in the general direction of the cable box.
I did follow ricosuave 's advice and programmed the units to come on at the same time. That seems to work fine.. |
|
N O Y B
St. John 3.16
join:2005-12-15
Forest Grove, OR
| reply to EMC2
said by EMC2 :Long story short - a juiced up TV display setting may contribute to blocking the IR signal from remote to stb.
Could you explain for me the IR remote control interference caused by juiced up TV display.
--
Be a Good Netizen - Read, Know & Complain About Overly Restrictive Tyrannical ISP ToS & AUP »comcast.net/terms/ »verizon.net/policies/
Say Thanks with a Tool Points Donation |
|
birdfeedr
Premium,MVM
join:2001-08-11
Warwick, RI
·Verizon FIOS
| reply to Willy
said by Willy :Do you have an email address that might help me? It appears BiggieB got it in response to a discussion about his IR remote problem in VZDirect forum. Check out the forum rules, and it's ok to provide account info because the posts there can only be read by the author and VZ reps.
Good luck. |
|
Willy
Premium
join:2000-09-24
USA
·Verizon FIOS
·Optimum Online
| reply to BiggieB
said by BiggieB :I had a similar a problem with my 7216 ..... Verizon sent me a IR Extender cable Please let us know if you have any questions or concerns." How did you arrange that?
I called Verizon and spoke to several different people that said they don't supply it. One guy said go to Radio Shack, I did, and they don't have it either.
I went to Best Buys and picked up what looked like the right thing but didn't work. A SmartPath IRE-1. IR Emitter with Mini-Plug, made by SpeakerCraft.
Do you have an email address that might help me?
Thanks |
|
ricosuave
join:2009-06-17
Mapleton, UT
| reply to Willy
If you haven't already got the IR extender, try reprogramming the remote so that the STB turns on before the TV. Or vice versa. If you did already get it, and it works, than forget it. Maybe for someone else to try.
STB + OK
9-7-7
STB
TV
OK
In that order, for the STB, and then the TV to turn on. Or...
STB + OK
9-7-7
TV
STB
OK
But I'm going to bet that the first one will work for you. |
|
Willy
Premium
join:2000-09-24
USA | reply to EMC2
It's set to "Standard" (normal).
Thanks |
|
EMC2
join:2007-08-21
Tampa, FL
·Verizon FIOS
| reply to Willy
In the interim, check your tv picture settings & see if it's set to "normal". Sometimes the tv displays are set to "brilliant" or "store" to attract attention on the showroom floor (brighter picture, etc).
Long story short - a juiced up TV display setting may contribute to blocking the IR signal from remote to stb. |
|
Willy
Premium
join:2000-09-24
USA | reply to Telcoguru
Thanks.
That's what I'm going to do.
I just got a new base unit for the stereo and TV components and the receiver was going to be in a more accessible location.
I wanted to see if that made a difference first, it didn't. |
|
Telcoguru
Premium
join:2005-08-22
Fresh Meadows, NY | reply to Willy
I believe that some of the 7200 & 7216 before a certain date have trouble with there IR module. If you can get the IR Extender cable from Verizon that should fix the problem. |
|
sjfiostech
join:2008-07-29
Medford, NJ
·Verizon FIOS
| reply to Willy
said by Willy :I discovered something strange. It seems if the TV is switched on first, the cable box is unresponsive. I need to turn the TV off, then the cable box on, and then the TV back on. Does that make any sense to anybody? I think BiggieB hit it right on the head! |
|
sameshtdd
join:2006-01-04
Teaneck, NJ | reply to Willy
Just throwing this out here but how do you have your TV connected to the STB? maybe there's something weird going on if you are using the HDMI connection? |
|
Willy
Premium
join:2000-09-24
USA | reply to Willy
I discovered something strange.
It seems if the TV is switched on first, the cable box is unresponsive.
I need to turn the TV off, then the cable box on, and then the TV back on.
Does that make any sense to anybody? |
|
BiggieB
Aol Sucks
join:2002-01-21
Flanders, NJ
| reply to Willy
I had a similar a problem with my 7216 and a non-responsive remote, just like you, and even after replacing the remote it still would not work correctly. Verizon sent me a IR Extender cable and since then ALL the problems I had with my remote not responding went away and it's a joy to use the DVR. Below is the email from Verizon Direct forum they sent me. This also fixed a problem that the remote would not work unless my TV was off.
"Thank you for your patience as well as for the update you provided. We are sending you out an IR Extender cable which was specifically designed to resolve issues where there is IR interference between the remote control and the STB. You should receive this cable by the end of the week. I will try to provide you tracking information once it becomes available. Please let us know if you have any questions or concerns." |
|
Willy
Premium
join:2000-09-24
USA | reply to Telcoguru
Will do. |
|
Telcoguru
Premium
join:2005-08-22
Fresh Meadows, NY | reply to Willy
Pull the power on the back of the DVR and plug it back in and let the box recycle then try your remote after that. |
|
Willy
Premium
join:2000-09-24
USA | reply to Willy
Well this isn't encouraging.
No one else with this problem?? |
|
