 NormanS Premium,MVM join:2001-02-14 San Jose, CA
·Pacific Bell - SBC
| reply to JLD037 Re: HELP.....Connection Issue w/ Router.
said by JLD037 :
Before connecting the router...it was something like 198.168.0.1 and after I connected it...it changes to 10.0.0.1 That is a typical Netgear response to a 192.168.x.x IP address on the WAN port. Presumably, the DSL modem is set up in its default mode, and is running the PPPoE session.
Do one of two things:
• Change the LAN IP address of the router from 192.168.0.1/255.255.255.0 to 192.168.x.1/255.255.255.0, where the value of 'x' is at least '2', and not greater than '255'.
• Put the modem into bridged mode and move the PPPoE session to the router. -- Norman ~Oh Lord, why have you come ~To Konnyu, with the Lion and the Drum |