wa5sox1
join:2007-07-09
Vanderwagen, NM
| [HN7000S] New Software Release
Had a reset last night. New software:
Software Date: Mar 5 2009, 18:44:43
Software Release: 5.8.0.49
Wonder what changes this will have in performance. The diagnostics page looks a little different. Time will tell.
--
G26(93W)/1247H-H/SOHO/.98 2Wt/Gateway 66.82.159.144 |
|
jagraff
join:2006-12-02
Rindge, NH
| No change here yet...still on 5.6.1.35. After our last update, we saw some glitches and bumps for a few weeks and then things seemed to stabilize and improve a little over performance pre-reset. Let's see what this one brings....
--
74West/1250Mhz/Proplan/.76m dish/HNS7000S/LinksysWRT54G/WindowsXPsp3 |
|
dbirdman
Premium,MVM
join:2003-07-07
Eureka, CA | reply to wa5sox1
5.8.0.49 came through to a lot of VAR customers, including me, a week ago. Both 7000 and 7000S
For hnFAPmon users, the modem def line for this release is:
'5.8.0.49' => '/cgi/execAdvCom.bin?Command=75', |
|
Molaker
join:2004-03-30
Cedarcreek, MO | Thanks dbirdman. That put hnFapmon back on track. |
|
wa5sox1
join:2007-07-09
Vanderwagen, NM
| reply to wa5sox1
Prior to this update, I always had an Inroute Group of 11. Now I have two, 31 and 41. It sort of toggles back and forth. .. As well, I am noting an enormous amount of failed transmissions. I just ran HughesNet's speedtest three times after clearing stats and had 374 failed transmissions. .. Before this "change", my failed transmission rate was always in the neighborhood of 0.01% or better. Now it's running at near 1% at times. .. Anyone noticing anything similar?
--
G26(93W)/1247H-H/SOHO/.98 2Wt/Gateway 66.82.159.144 |
|
yolarry
join:2007-12-29
Creston, WV | reply to wa5sox1
I havent got my update yet? so anyways thanks for the edit on hnfapmon. |
|
Just Rachel
occasional optimist
Premium
join:2003-07-10
Mccloud, CA | reply to wa5sox1
No update for me yet. |
|
laserfan
join:2005-01-14
Blanco, TX
| reply to dbirdman
said by dbirdman  :For hnFAPmon users, the modem def line for this release is: '5.8.0.49' => '/cgi/execAdvCom.bin?Command=75', Many thanks dbirdman--I'm ready for the upgrade! 
--
HN7000S v5.6.1.35 Home Plan, G13/H1@127W, 1110MHz 33Msps, SigTyp 72, 10-20clients & 6+OSes |
|
wa5sox1
join:2007-07-09
Vanderwagen, NM
2 edits | reply to jagraff
Well, lots of changes over the past 10 days. First, the Inroute Group change to 31 and 41 (from 11), then two nights later the new software. Everyone keep an eye on your Inroute Group to see if it changes with the new software, or a day or two prior.
Thus far, I'm not a happy camper with the change. Transmit errors wayyyy up from the 0.01% I used to have. Sometimes, in diagnostics in the five minute windows, it says 6% loss. The loss seems to come in "bursts" .. sometimes browsing with no loss, then out of the blue 300 or more failed transmissions.
Another change I noted a few weeks back is the Firewall, in the System Info said "Enabled", but clicking on Firewall revealed it as "Disabled". Now it says:
General Config Bad fragment check: Enabled
Ifc Validation Check: DISABLED
Management IP Address: 10.XXX.XX.XX
Under Policy Stats:
ACL Statistics
--------------
ACL is Enabled from the NOC Side
Total num of valid rules: 2
Total num Packets Received: 2859329
Total num Packets Dropped: 0
So, I'm hoping they "fine tune" things, as browsing is sometimes Very sluggish, and I am getting "Marginals" and "Bads" where I always had "Good" in Diagnostics. Don't think it's anything on my end, as all these changes seem to correlate with the time I started receiving so many Nak'd transmissions. (Edit): Timing applications are suffering. And, when doing online transactions, I sometimes encounter difficulty. At this time, until things improve, I'm afraid to do any business online.
Here's my stats, and they ain't pretty. The loss percentage is just the average. As stated, the five minute windows have shown as much as 6% loss.
____________________________________________________
Adapter Main Statistics:
------------------------
Signal Strength.............. 92 Stream Msg-Ackd/Nakd........ 612058/9278
Flags............... 0x00001000 NonStream Msg-Ackd/Nakd..... 2374/25
Stream Error Rate....... 1.49% NonStream Error Rate....... 1.04%
UpTime (d:h:m:s).. 003:01:16:29 Aloha Starts................ 2374
WakeUp Aloha Starts.......... 0 Ranging Starts.............. 0
Transport Alarm Bit..... 0x0000 Frames Received............. 2963861
Addresses Open............... 7 Frame Errors: CRC/Bad Key... 0/0
Carrier Info....... 093:W:12475 Miscellaneous Problems...... 193
Rate Code........ 512k 2/3 (TC) No Receive Outroute Lock.... 0
Inroute Group................ 31 No FLL Lock................. 0
Inroute..................... -1 No Network Timing Sync...... 0
IQoS ID...................... 0 Current Modcod.............. 8-PSK 9/10 (17)
--
G26(93W)/1247H-H/SOHO/.98 2Wt/Gateway 66.82.159.144 |
|
tobicat
join:2005-04-18
Tombstone, AZ | wa5sox1 I have found that after some Software updates I have to do a forced ranging to get things back to normal. Try it it won't hurt anything if it doesn't help.
--
9000 spaceway III, 7000S SatMex 5 990, Dlink wirless |
|
jagraff
join:2006-12-02
Rindge, NH
| reply to wa5sox1
Repeating what Tobicat said...Now that I think about it, it was the forced ranging that cleared up things for us on the last update.
Still no update here yet...
--
74West/1250Mhz/Proplan/.76m dish/HNS7000S/LinksysWRT54G/WindowsXPsp3 |
|
yolarry
join:2007-12-29
Creston, WV | reply to wa5sox1
Aug 28 2008
Still same. |
|
creegah
join:2008-10-09
Murphy, NC
| reply to wa5sox1
Yesterday evening my HN7000S was displaying heavy download activity. I turned off all the computers and finally turned off the router and the activity did not diminish. I checked useage this morning and it was about 205mb in that timeslot. Was this the update? And why wasn't I fapped? |
|
dbirdman
Premium,MVM
join:2003-07-07
Eureka, CA
| The only thing answerable in your questions is that it was not the firmware update. That is relatively small, and doesn't show in usage.
A huge Vista SP2 at 345MB has been hitting a lot of people, but of course that would stop when you turned off your router, and definitely would FAP you if allowed to run.
--
W2K Server|Toshiba Satellite XP Pro|iDirect 3100 on Datastorm 1.2 meter XF3 with 4-watt BUC|HughesNet G28/1070/7000s Pro on 2-watt Datastorm G74|Sprint Air Card|1990 Blue Bird Wanderlodge Bus "Blue Thunder"|Author of PC-OPI and DSSatTool |
|
yolarry
join:2007-12-29
Creston, WV
 ·HughesNet Satellit..
| reply to wa5sox1
Wow did not know Vista SP2 was out in the wild. thats 2 software updates I gotta look after
Also I never try forced ranging before. I try it today and fix some issues that I been having all month.
--
HN7000S - 99 West 1370 MHz - Pro - installed October 2007 - Linksys WRT54G V8 - Xbox 360, PSP-1001 CFW - 2 Vista Desktops - 1 XP Desktop - 1 vista Acer Aspire 3680 laptop |
|
Road Runner
join:2004-03-19
Morrilton, AR | reply to wa5sox1
Still got the Aug 28 2008 Software here. |
|
bnugget
@direcpc.com | reply to wa5sox1
just got the software update overnight. thing wasn't working this morning so i rebooted. noticed that it retained the hourly history after reboot 'cept for the hour of reboot. |
|
Nimblewill
join:2007-08-17
Dahlonega, GA | reply to wa5sox1
Got my update last night. So far the only change I have found is the System Status page now shows the Diagnostics Code hourly and recent. It would be nice if Hughes would let us know what the system upgrade's do!
Drew |
|
Just Rachel
occasional optimist
Premium
join:2003-07-10
Mccloud, CA
·HughesNet Satellit..
| reply to wa5sox1
Hubby was complaining about some computer issues when I came home from work. I told him that by his description, the internet wasn't working. Sure enough, he must have been getting the upgrade while trying to surf, cuz we have it too! Now to see what it "improved".  |
|
yolarry
join:2007-12-29
Creston, WV | reply to wa5sox1
Updated to SP2 and Had software update last night.
Twitter search still broken. have to use proxy :| |
|
