Matt
Take me down to the paradise city
Premium
join:2003-07-20
Jamestown, NC | reply to johnpsph
Re: "Use default Remote Gateway" Configuring Routing
I see your problem. You need to change the LAN or VPN subnet. They are both 192.168.1.x. |
|
johnpsph
join:2003-11-16
Saint Louis, MO
 ·Charter Pipeline
| Well, here's the problem: |
|
Matt
Take me down to the paradise city
Premium
join:2003-07-20
Jamestown, NC | So change one of them to 192.168.2.x? |
|
johnpsph
join:2003-11-16
Saint Louis, MO | Sorry, I could have been much more clear: the router's VPN settings will not ALLOW me to change the "Remote IP range" from 192.168.1.x.
Is there something that I can try from the client side? |
|
Matt
Take me down to the paradise city
Premium
join:2003-07-20
Jamestown, NC
 ·North State Commun..
| said by johnpsph  :Sorry, I could have been much more clear: the router's VPN settings will not ALLOW me to change the "Remote IP range" from 192.168.1.x. Is there something that I can try from the client side? You have to change the entire subnet of the VPN router. You probably need to do this on the setup tab or something? You either need to change the entire remote subnet from 192.168.1.x or you need your change your client subnet from 192.168.1.x.
On a D-Link I have, you can do this on Setup -> Network Settings -> Router IP Address |
|
jazzman916
Life on the Upbeat
Premium,Mod
join:2001-09-01
Birdland
clubs: |  (topic move) "Use default Remote Gateway" Configuring Routing
Moderator Action
The post that was here, has been moved to a new topic .. »"Use default Remote Gateway" Configuring Routing |
|
