framemainer
Premium
join:2004-12-11
Atlanta, GA
| [Tomato] WRT54-GL LCP appears to be disconnected - VOIP with Int I'll start with a question - is there a way to increase the 5-second-pending value after disconnect is first detected? I am thinking that the Tomato keep-alive just needs a little more time.
I've been running Tomato (now on v1.23) since November 2008 on WRT54-GL. I have Netopia 2210 modem with BellSouth DSL-extreme and AT&T CallVantage D-Link DVG 5102-S Telephone Adapter (TA) two-line plan behind router. Tomato eliminated the frequent power-cycles required to keep the TA working.
No wireless.
I hardly ran anything but the TA (I was using Comcast for Internet).
Last week, I moved our Ethernet cables to the WRT54-GL - thinking if it works, I would cancel the Comcast service. However, I started getting "Daemon.warn pppoe[nnnn]: LCP appears to be disconnected (pending:5)" (had a month of continuous service until then). Yesterday, I changed the Keep Alive check interval from 30 to 14400 - had even more disconnects (9). I should mention that I often run two VPN clients simultaneously - although my bandwidth requirements are usually fairly low, I can see that the VPNs and AT&T-CV could be a toxic mix.
A Line Tech came and found no problems two days ago.
Then again, two horribly weird things happened yesterday. First, I had audible hiss on the land line that runs the DSL - called in a problem, but did not get a return call. Second, I moved the TA behind the Comcast router, made a call, and was disconnected, just like I'd been with the TA on DSL. So, a total home office melt-down yesterday. I could see the TA maybe being bad, but it's a strange coincidence that I started having problems after moving Internet access.
Today, the check-interval is back to 30 seconds, and my Internet is back on Comcast. |
