toddx
join:2006-06-20
Midlothian, VA | reply to ImpetusEra
Re: Private IP question when using FVX538
Just wanted to follow-up on my original post.
We finally got dual WANs set-up in each location and the VPN tunnel working. So far so good. I am dropping VPN connection every once in a while, but it seems to come back up.
Todd |
|
ImpetusEra
join:2004-05-19
00000 | reply to toddx
In some cases you may want them in the same address range but usually it's as you have it with them using separate ranges. |
|
toddx
join:2006-06-20
Midlothian, VA
| Apologies in advance if this is a dumb question, but I could use some guidance from those on the forum.
I'm helping a friend set-up a VPN tunnel between to offices. The plan is to use 2 of the FVX538s with dual WANs in each location.
My question concerns the private IPs in each location. My plan is as follows:
Location 1:
Router: 192.168.1.1
Static Range: 192.168.1.10-192.168.1.50
Dynamic Range: 192.168.1.100-192.168.1.199
Location 2:
Router: 192.168.2.1
Static Range: 192.168.2.10-192.168.2.50
Dynamic Range: 192.168.2.100-192.168.2.199
Am I approaching the addressing properly, or should I stick within the 192.168.1.x range and just spread out from there?
I've run through the online config tool and things seem fairly straight foward.
Thanks,
Todd |
|
