DoctorBunsen
join:2008-10-15
Montreal, QC | reply to dbsanfte
Re: Evading throttling with uTP / uTorrent 1.9a
This worked for me! My speed went from throttled 25 to 440+ as soon as I started changing those settings.
Thank you. |
|
taytong888
join:2005-06-20
Nepean, ON
| reply to dbsanfte
No, this didn't work for me on a consistent basis. I use utorrent 1.9beta. Over the weekend it seemed to work but during throttling hours in the week the speed dropped to 20-26 kBps.
 |
|
mj
join:2008-04-02
Burlington, ON
 ·TekSavvy Solutions..
2 edits | Yep same here, did everything step by step with 1.8.2 and it didn't work. So went with 1.9a and it worked! 25Kb/s turned into 200+ so I was pretty excited. However, it was short lived and right back to 25KB/s after a while.
The one thing I noticed and don't like about 1.9a is that it IGNORES my u/l limit and just u/l's my MAX.
I'll be going back to 1.8.2 and maybe try virtual box to beat the throttle....otherwise I will just accept it. |
|
Fireblade
join:2008-08-27
St Catharines, ON
2 edits | reply to dbsanfte
Grab the next version, that was a bug with 908 - now my upload rate is fine. »forum.utorrent.com/viewtopic.php?id=49813 |
|
Liquidforce
| reply to dbsanfte
Now - does this apply to Multi-link MLPPP as well? or can this be done on ANY DSL Service and see the same improvement? |
|
DoctorBunsen
join:2008-10-15
Montreal, QC
·Bell Sympatico
| reply to dbsanfte
It stopped working for me too so I downloaded the new version and it started working again.
It seems a little wonky and one torrent site I use doesn't allow beta clients but that ZeroShell thing isn't working for me anymore so this is my only option. |
|
dbsanfte
join:2005-03-15
Montreal, QC | reply to Liquidforce
I was under the impression MLPPP users weren't throttled. |
|
Anonymous_
Anonymous
Premium
join:2004-06-21
127.0.0.1
clubs:
 ·RoadRunner Cable
·Time Warner Cable
 ·Time Warner VOIP
4 edits | reply to dbsanfte
let me find a well seeded torrent to show off my unthrottled Connection
notce i use 1.5.1 beta 466 much faster then any of the newer ones
i got (see attachment)          |
|
Thornhill
@primus.ca
| reply to dbsanfte
Hello!
Using 1.9 beta build 14981
In Thornhill, Ontario
My ISP is Primus.
Followed the screenshot settings and for a few seconds it worked nicely *after I reseted the router*. and then it's back to maxing out at 30kB/s.
Darns. |
|
Thornhil
@primus.ca
| reply to dbsanfte
Never. This works.
Using 1.9 beta build 14981
In Thornhill, Ontario
My ISP is Primus.
Followed the screenshot settings and for a few seconds it worked nicely *after I reseted the router*. and then it's back to maxing out at 30kB/s. BUT. after I waited 10 minutes patiently it's up to 100kB/s bobbing up an down. It's now 8:53 pm EST.
not bad |
|
davidl
join:2008-07-11
Vaudreuil-Dorion, QC | reply to dbsanfte
I've been messing with 1.9a for a while and thanks to your settings, it finally works!
Thank You! Screw Bell!!!11!!1! |
|
BSAKing
join:2009-03-20
Kanata, ON
| reply to DoctorBunsen
Please bear with me - I am not as experienced as the rest of you, but I am trying to get this to work.
The only version I have been able to get is 1.9 Beta (Build 14981). Is this the correct one to work with?
If so, my info screens in the setup are not exactly as indicated (I have some extra entries). And so far I have had zero success - throttles at 42.6kB/s |
|
l0thar
join:2005-12-29
Far Far Away | Currently, build 14981 is the most recent and it should work.
I had stuck with 1.6.1 until reading this thread, and thank the original poster for it. The addition of a new way to transport data (uTP) made it interesting to try out. |
|
hc18
@teksavvy.com
| reply to dbsanfte
i gave this a shot as im still using 1.6, but after 20-30 minutes of waiting nothing connected.
1.9a detected peers, but didn't connect to any.
when it did connect, it would do so for a few seconds and only manage a trickling 1-5 kbps.
looks like i'm still stuck on 1.6 and throttling in the heavy hours... |
|
animeking
@bell.ca
| It seems like Bell is blocking the uTP traffic, when I set it to 10, I can't connect at all, when I set it to 15, I feel like the connections are being throttled. (60 K down, 50 K up) on all well seeded torrents. This was a complete change from my 1.3 M down earlier in the day. |
|
animeking
@bell.ca
| When I have bt.transp_disposition set to 10, I can't seem to connect to anyone. When I have it set to 15, I can connect, but it seems to be throttled. I'm using port 1723 if that matters.
After resetting my modem, I ran uTorrent again with bt.transp_disposition set to 10. I can connect to peers, but the speed seems throttled at the ISP's usual throttle limits. Though after I changed the port to 1723, the speed seemed to jump right up. I set bt.transp_disposition to 15 and changed the settings to enable DHT, Local Peer Discovery and Peer Exchange and changed the Encryption setting to Enabled and allowed legacy incoming connections; the speed slowed down within a few minutes. I changed the setting back to 10, disabled DHT, LPD and PEX, forced Encryption and disallowed legacy connections and the speeds increased once again. |
|
dbsanfte
join:2005-03-15
Montreal, QC
·Colbanet
1 edit | First off: if you're getting any speeds above 30kB/sec, you're not throttled. Period. If it seems slower than normal, then there just aren't enough peers who have uTP enabled.
Second, I'm no longer using a Bell wholesaler so I'm not throttled, and can't really help you troubleshoot. |
|
van
@cogentco.com | reply to dbsanfte
Hi,
What are the throttling hours? |
|
hc18
@teksavvy.com
| reply to dbsanfte
i'm on a 5M teksavvy line, but i've been throttled mostly from 3pm-12pm or so. out of that gap, its pretty much smooth and high speeds.
gave older utorrent versions a try (1.8.2, 1.8.3) and still under 30kbps. right now sticking with 1.8.3 and waiting for 1.9a's new feature to sink in among the masses.
1.9a worked as animeking's second post describes it, but only once for me. after closing it, so did the high speeds. |
|
ninja
@bell.ca | reply to dbsanfte
It's nothing impressive..
Your upload speed is 44k/s .. try to have 200k/s download with upload set to 1k/s!! |
|
