mrstoney
join:2009-03-20
| [Help Me] DWL-2100AP - Can't Connect to 192.168.0.50 - Help!
I recently updated to an 802.11n network using a DGL-4500 and have it set up as "n" only.
I also set up my old DI-624 router to be a client off of the new router so that I can also have a "g" network.
This is all working just fine.
However, I also want to add my old DWL-2100AP as a repeater for the g network. However, I can't get to the setup interface. Seriously, I can't even connect via a browser (or ping) to the default 192.158.0.60 address using a direct connection.
Can anyone offer any advice on what might be going wrong? I've pushed the reset button on the back. The power and LAN lights come on just fine. What could be wrong? |
|
mrstoney
join:2009-03-20 | Ah ha, I figured it out. One must hold down the reset button for 10-15 seconds to reset it to factory conditions. |
|
adslgeek
join:2009-03-01 | That is weird, I guess some of the settings must have been screwy.
Pinhole resets are the cure for the masses! 
Cheers,
aDSL geek |
|
wantmore
join:2009-03-21 | reply to mrstoney
did u connect 192.168.0.50 or 60? 50 is the default ip.... |
|
