Crowbar1
join:2009-06-23 | reply to clearlyjunk
Re: Unlocking Bell 2Wire modems....
Glad you got it working .  |
|
clearlyjunk
join:2009-06-30
| reply to Majoram
OMG GUYS THANK YOU SOOOO MUCH, I LOVE YOU CROWBAR, IT WORKED!!!!!!!!!THNZ FOR THE HELP
The problem was, i was at the normal singnet homepage (blue links on the left) and it wasnt connecting, SO i called my isp and asked them my PPP user and pass and then i just clicked "internet connect/disconnect) and punched in the user and pass and click go, AND IT WORKED
IM ONLINE TALKING FROM MY 2701HG-G |
|
clearlyjunk
join:2009-06-30 | reply to Majoram
Can anyone terll me what settings i should have changed,
and when enter system setup it asks for my ppp pass and user. Do i enter what i got from my isp? |
|
clearlyjunk
join:2009-06-30 | reply to Majoram
it didnt work  |
|
clearlyjunk
join:2009-06-30 | reply to Crowbar1
Right, il give it a go  |
|
Crowbar1
join:2009-06-23
| reply to clearlyjunk
OK , i can only assume all the settings are correct . All the lights on is a good sign Sometimes it takes a couple minutes for the internet light to come on . Please wait and see what happens .... |
|
clearlyjunk
join:2009-06-30
1 edit |  reply to Majoram
kay, well i did that n that sets up a bridge connection. right? yea
so i did that and well, lights for my ethernet, dsl and power are on . The light for internet is not, and i checked that picture majoram posted about the one troubleshooting- DSL diagnostics, and mine is pretty different. light some of the numbers are high, could that be the problem? |
|
Crowbar1
join:2009-06-23 | reply to clearlyjunnk
Type 192.168.1.254 into your browser to access the modem , then use the system "setup" to change the user name and password . Also make sure ATM Settings are
VPI: 0, VCI: 35 .  |
|
clearlyjunnk
@primus.ca
| reply to Majoram
How would I be able to change my username and pass? It's stuck on my @signnet or something like that. What are the exact setting that i need to change? (the firmware is the same one that's being posted about)
And, i know what the purpose of the thread is but I can't get it to work.
thanks,
(BTW this is clearlyjunk, i just didn't sign in) |
|
Crowbar1
join:2009-06-23 | reply to clearlyjunk
Did you change your user name and password in the modem ? Also depending on the firmware used , you may need to change some of the settings . |
|
Majoram
join:2002-10-22
Toronto, ON
| reply to clearlyjunk
said by clearlyjunk  :Hey i was wondering. is it possibel to use the 2wire modem with another isp other than bell, because i flashed my modem (2701HG-G) but when i try to get on the internet it says it cant connect with my isp. Yes that's the whole purpose of this thread |
|
clearlyjunk
join:2009-06-30 | reply to Majoram
Hey i was wondering. is it possibel to use the 2wire modem with another isp other than bell, because i flashed my modem (2701HG-G) but when i try to get on the internet it says it cant connect with my isp. |
|
Blackjaw
join:2009-06-22
Bowmanville, ON | reply to Majoram
Check out how I got it to work without flashing or anything:
»[Internet] How To Use A Separate Router With A 2Wire Modem |
|
marbillion
join:2004-05-12
Canada
1 edit | reply to Majoram
Majoram - thank you for this info! I followed what you said and applied this to a bell 2wire 2701hg-g and it works!
cheers and thanks for sharing. |
|
j3richo
join:2007-12-08
Gatineau, QC
 ·Acanac
 ·Videotron
| reply to Majoram
ok ignore the previous post, port forwarding is working fine, it seems the problem is I can't connect to my own ip from inside my network, I can connect to other computers by going to their local 192.x.x.x address but my own public IP won't work, anyone know why this is happening and how I can fix it? |
|
j3richo
join:2007-12-08
Gatineau, QC | reply to Majoram
is anyone having problems getting port-forwarding to work on this?
I installed this on my 2700HG-B and everything is working except port-forwarding doesn't seem to do anything |
|
Zyzomys
join:2008-05-23
Cantley, QC | reply to Majoram
Thanks Majoram, I followed your steps and it worked perfectly. I am posting this using a former Bell 2Wire 2701 in Bridge mode. |
|
j3richo
join:2007-12-08
Gatineau, QC | reply to Majoram
tried this and it worked fine. nice to have WPA2 now |
|
anemicfrog
join:2009-05-09 | reply to wayjac
Thanks a lot, now i got it  |
|
wayjac
Premium,MVM
join:2001-12-22
Indy | reply to anemicfrog
I've never seen a dialog for "auto update" you can disable "remote management"
If that is what you seek here's the url
/xslt?PAGE=J15 |
|
