Phoenix2088
join:2002-12-04
Strongsville, OH
clubs:
 ·WOW Internet and C..
4 edits | reply to asteriskloveerrr
Re: [Unlock] TUTORIAL: VONAGE WRTP54G WITH 5.01.04
said by asteriskloveerrr :
Hi Phoenix2088, this is wonderful, I'm wondering is this method applying to RTP300 too? thanks for your instruction.
Thanks, no problem. Yes this method will work for the RTP300, but some files need to be substituted. Other than that follow the directions above for the rest of the unlock procedure.
1. Download the following to replace the von10062.bin file contained in the ZIP archive at Step 1 - Part 3. Rename this new file back to von10062.bin. To ensure a proper download use a DOS prompt. The wr and rf files from the ZIP archive are still used for the RTP300.
»httpconfig.vonage.net/rt-11.1.0-···0327.img
or
The DOS prompt will take 5-10 min. The file size is 3,866,632 bytes.
2. This is the RTP300-NA Firmware and will take the place of the firmware at Step 1 - Part 5 and Step 5 - Part 4. Go to the following website, locate and download the firmware. After that you must edit the file for it to run on the RTP300. Use a hex editor and change offset 0x17 from 4D to 4C and offset 0x3B0004 from 85 DA 20 BB to 3B A5 4D DA
»www.linksys.com/servlet/Satellit···ondetail
P.S. - When using the hex editor simply overwrite the file once you are finished. |
|
asteriskloveerrr
@olarship-match.net | it works, so far this is most perfect solution for vlocked WRTP54G/RTP300. millions thanks. |
|
ncharpen
@acndigital.net |  reply to Phoenix2088
 This is great !!! I'm a novice network config guy. I just followed step by step the procedure and voila ! Million thanks. It worked great. |
|
urskrishna
join:2008-10-22
600041
|  reply to Phoenix2088
Could you please let me know how to change the values using Hex Editor, I've done all the changes until this step, mine is RTP300. I opened this Image file using the hex editor and I can see lot of values, but don't really know how and where to change it, please help
"Use a hex editor and change offset 0x17 from 4D to 4C and offset 0x3B0004 from 85 DA 20 BB to 3B A5 4D DA" |
|
Barvinok
@volia.net
| reply to Phoenix2088
I have RTP300 freshly disconnected from Vonage therefore safe to play with. I tried to do according to your guidelines.
So far I was only able to downgrade firmware from 5.xxx to 1.00.62. Logged in to the box, left browser open, then started CYT 4.6 but to no avail -- it simply stays at 'waiting for your device' forever...
Any help? Thanks in advance. |
|
Phoenix2088
join:2002-12-04
Strongsville, OH
clubs: | Try using CYT 3.5, the link is on the first page. I personally never had any luck with 4.6. |
|
Barvinok
@volia.net
| Tried CYT 3.5, but still no luck. It too hangs on 'waiting for your device' and nothing happens.
But what I'm actually looking for is the way to flash the box with OpenWRT, not necessarily to fully unlock it. It seems that ping-hack does the trick, and who cares about Admin password if it will be running non-Linksys firmware anyway.
Thanks for the tip though. |
|
GrauerFuchs
join:2008-01-05 | OpenWRT may be capable of running, but it's still very preliminary for this platform. You also won't have any of the phone features at all in OpenWRT. So far, the FXS ports are not yet working on anything but the Linksys firmware. |
|
Barvinok
@volia.net
| I don't care about FXS, I just need this particular Linksys box to be able to run an ipip tunnel and a couple of VLANs. Just like my other WRT54GS do with FreeWRT. I'm pretty much aware of the situation with OpenWRT and TI AR7-based models, in fact, I was among the first to talk to guy who finally booted OpenWRT on WRTP54G and I'm actively working on it using his patches  |
|
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA
| said by Barvinok :..., in fact, I was among the first to talk to guy who finally booted OpenWRT on WRTP54G and I'm actively working on it using his patches Were you saying your WRTP54G is running with OpenWRT? If so, that will be great. Perhaps, you guys need to download the Legerity GPLed driver source for the FXS port and start working on it. By any chance, did you know if anyone managed to run the OpenWRT for TI AR7 on a PAP2v2?
--
Mazilo always prays for FREEBIES!
US Phone: +1-678-601-0907
UK Phone: +44-703-194-2574
|
|
Guest08
@cox.net | reply to Phoenix2088
Works great! Thanks a lot Phoenix2088!!! |
|
