[Unlock] TUTORIAL: VONAGE WRTP54G/RTP300 WITH 5.01.04 in VOIP Tech Chat http://www.dslreports.com/forum/r21123078 en Wed, 07 Jan 2009 20:02:43 EDT Wed, 07 Jan 2009 20:02:43 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G/RTP300 WITH 5.01.04 http://www.dslreports.com/forum/remark,21680560 mazilo :
said by ogdensburg See Profile :

Now my WRTP54G is totally bricked.
You should be able to de-brick your WRTP54G using a USB/Serial-console cable.]]> http://www.dslreports.com/forum/remark,21680560 Sun, 04 Jan 2009 17:23:38 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G/RTP300 WITH 5.01.04 http://www.dslreports.com/forum/remark,21677592 ogdensburg : I did the samething, go directly to the hacked firmware without going to 1.0.62 vonage firmware first. Now my WRTP54G is totally bricked.]]> http://www.dslreports.com/forum/remark,21677592 Sat, 03 Jan 2009 23:54:57 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G/RTP300 WITH 5.01.04 http://www.dslreports.com/forum/remark,21650974 brtech : Worked for me with an RTP300.

One thing not mentioned is that you either have to unplug any other device other than your PC which is connected to the RTP300, or you need to change the IP address it is using for the commands. The instructions (and the RF file) assumes the PC is 198.162.15.100. Your TFTP server window will tell you what the IP address is.

The illustrations are of the WRTP console. The RTP300 Ping console looks a little different.

On my box, the Admin and user logins don't seem to work, but the voip configuration page is available.

Thanks to all who figured this out]]> http://www.dslreports.com/forum/remark,21650974 Mon, 29 Dec 2008 13:49:45 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G/RTP300 WITH 5.01.04 http://www.dslreports.com/forum/remark,21500793 Phoenix2088 :
said by Boxter583 :

I have a RTP 300 and when I get to the end of step 4 it stays blinking. I waited for about and hour and it was still blinking. I repeated the steps twice and the same thing happened. Any suggestions?
Did you make sure to switch out the 1.00.62 WRTP54G firmware originally posted with the RTP300 version from the forth post? ]]> http://www.dslreports.com/forum/remark,21500793 Sat, 29 Nov 2008 12:53:58 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G/RTP300 WITH 5.01.04 http://www.dslreports.com/forum/remark,21497570 ogdensburg : Anybody apply tried similar steps (with different firmware) in Vtech IP8100 phone with new firmware?]]> http://www.dslreports.com/forum/remark,21497570 Fri, 28 Nov 2008 15:23:37 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G/RTP300 WITH 5.01.04 http://www.dslreports.com/forum/remark,21470870 anon : I have a RTP 300 and when I get to the end of step 4 it stays blinking. I waited for about and hour and it was still blinking. I repeated the steps twice and the same thing happened. Any suggestions?]]> http://www.dslreports.com/forum/remark,21470870 Sat, 22 Nov 2008 23:17:26 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G/RTP300 WITH 5.01.04 http://www.dslreports.com/forum/remark,21453782 anon : Thank you Phoenix2088 that worked. I did have to reset to default login 1st but all worked after that.]]> http://www.dslreports.com/forum/remark,21453782 Wed, 19 Nov 2008 19:15:17 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G/RTP300 WITH 5.01.04 http://www.dslreports.com/forum/remark,21451150 Phoenix2088 :
said by imagn :

I've tried to modify the firmware with a hex editor but cant seem to find the values you refered to can someone please let me know what i should be doing and how to identify the correct values in hex editor
I know this does not directly answer your question but I have seen several questions pop up regarding the hex edit. I will try and post a modified RTP300 NA firmware in the next few days once I get a chance. ]]> http://www.dslreports.com/forum/remark,21451150 Wed, 19 Nov 2008 10:49:31 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G/RTP300 WITH 5.01.04 http://www.dslreports.com/forum/remark,21451146 Phoenix2088 :
said by cape27cod :

Any idea if this will work w/ver 1.00.62 as shipped by Vonage. I don't have an upgrade option in my admin tab to upgrade assume locked out by Vonage.
You should be able to start at Step 5 in the tutorial and use CYT then upgrade to the NA firmware.]]> http://www.dslreports.com/forum/remark,21451146 Wed, 19 Nov 2008 10:48:09 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G/RTP300 WITH 5.01.04 http://www.dslreports.com/forum/remark,21450796 anon : Any idea if this will work w/ver 1.00.62 as shipped by Vonage. I don't have an upgrade option in my admin tab to upgrade assume locked out by Vonage. ]]> http://www.dslreports.com/forum/remark,21450796 Wed, 19 Nov 2008 09:30:02 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G/RTP300 WITH 5.01.04 http://www.dslreports.com/forum/remark,21447414 anon : I've tried to modify the firmware with a hex editor but cant seem to find the values you refered to can someone please let me know what i should be doing and how to identify the correct values in hex editor]]> http://www.dslreports.com/forum/remark,21447414 Tue, 18 Nov 2008 16:02:46 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G WITH 5.01.04 http://www.dslreports.com/forum/remark,21400955 anon : Works great! Thanks a lot Phoenix2088!!!]]> http://www.dslreports.com/forum/remark,21400955 Sun, 09 Nov 2008 15:55:46 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G/RTP300 WITH 5.01.04 http://www.dslreports.com/forum/remark,21393163 Phoenix2088 :
said by misterschaps :

Hi.
I´m having problems unlocking my wrtp54G from vonage.

I´ve followed the process by the book at least 20 times, and all the times, when transferring the file to the router, it reaches very fast about 94% (sometimes 93, sometimes 95), then goes veeeryyyyy slow for a few minutes, and then times out. Over and over, so I can´t get to the next step, which is watching the router installing the software.

Any hint?

THANKS!!

Dave.-
That usually happens when the wireless is still running. Make sure that the wireless is off before performing the firmware update.]]> http://www.dslreports.com/forum/remark,21393163 Fri, 07 Nov 2008 18:06:06 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G/RTP300 WITH 5.01.04 http://www.dslreports.com/forum/remark,21392567 anon : Hi.
I´m having problems unlocking my wrtp54G from vonage.

I´ve followed the process by the book at least 20 times, and all the times, when transferring the file to the router, it reaches very fast about 94% (sometimes 93, sometimes 95), then goes veeeryyyyy slow for a few minutes, and then times out. Over and over, so I can´t get to the next step, which is watching the router installing the software.

Any hint?

THANKS!!

Dave.-]]> http://www.dslreports.com/forum/remark,21392567 Fri, 07 Nov 2008 16:10:29 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G WITH 5.01.04 http://www.dslreports.com/forum/remark,21366841 mazilo :
said by Barvinok :

..., in fact, I was among the first to talk to guy who finally booted OpenWRT on WRTP54G and I'm actively working on it using his patches ;)
Were you saying your WRTP54G is running with OpenWRT? If so, that will be great. Perhaps, you guys need to download the Legerity GPLed driver source for the FXS port and start working on it. By any chance, did you know if anyone managed to run the OpenWRT for TI AR7 on a PAP2v2?
--
Mazilo always prays for FREEBIES!
US Phone: +1-678-601-0907
UK Phone: +44-703-194-2574
]]> http://www.dslreports.com/forum/remark,21366841 Mon, 03 Nov 2008 00:03:05 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G WITH 5.01.04 http://www.dslreports.com/forum/remark,21356408 anon : I don't care about FXS, I just need this particular Linksys box to be able to run an ipip tunnel and a couple of VLANs. Just like my other WRT54GS do with FreeWRT. I'm pretty much aware of the situation with OpenWRT and TI AR7-based models, in fact, I was among the first to talk to guy who finally booted OpenWRT on WRTP54G and I'm actively working on it using his patches ;)]]> http://www.dslreports.com/forum/remark,21356408 Fri, 31 Oct 2008 15:50:34 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G WITH 5.01.04 http://www.dslreports.com/forum/remark,21356331 GrauerFuchs : OpenWRT may be capable of running, but it's still very preliminary for this platform. You also won't have any of the phone features at all in OpenWRT. So far, the FXS ports are not yet working on anything but the Linksys firmware.]]> http://www.dslreports.com/forum/remark,21356331 Fri, 31 Oct 2008 15:36:19 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G WITH 5.01.04 http://www.dslreports.com/forum/remark,21354877 anon : Tried CYT 3.5, but still no luck. It too hangs on 'waiting for your device' and nothing happens.
But what I'm actually looking for is the way to flash the box with OpenWRT, not necessarily to fully unlock it. It seems that ping-hack does the trick, and who cares about Admin password if it will be running non-Linksys firmware anyway.
Thanks for the tip though.]]> http://www.dslreports.com/forum/remark,21354877 Fri, 31 Oct 2008 11:02:48 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G WITH 5.01.04 http://www.dslreports.com/forum/remark,21354269 Phoenix2088 : Try using CYT 3.5, the link is on the first page. I personally never had any luck with 4.6.]]> http://www.dslreports.com/forum/remark,21354269 Fri, 31 Oct 2008 09:22:21 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G WITH 5.01.04 http://www.dslreports.com/forum/remark,21353858 anon : I have RTP300 freshly disconnected from Vonage therefore safe to play with. I tried to do according to your guidelines.
So far I was only able to downgrade firmware from 5.xxx to 1.00.62. Logged in to the box, left browser open, then started CYT 4.6 but to no avail -- it simply stays at 'waiting for your device' forever...
Any help? Thanks in advance.]]> http://www.dslreports.com/forum/remark,21353858 Fri, 31 Oct 2008 06:52:38 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G/RTP300 WITH 5.01.04 http://www.dslreports.com/forum/remark,21342355 anon : Thanks for this. Just flashed an RTP300 that a friend gave me with no problem.]]> http://www.dslreports.com/forum/remark,21342355 Wed, 29 Oct 2008 01:53:37 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G WITH 5.01.04 http://www.dslreports.com/forum/remark,21308701 urskrishna : Could you please let me know how to change the values using Hex Editor, I've done all the changes until this step, mine is RTP300. I opened this Image file using the hex editor and I can see lot of values, but don't really know how and where to change it, please help
"Use a hex editor and change offset 0x17 from 4D to 4C and offset 0x3B0004 from 85 DA 20 BB to 3B A5 4D DA"]]> http://www.dslreports.com/forum/remark,21308701 Wed, 22 Oct 2008 14:01:43 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G/RTP300 WITH 5.01.04 http://www.dslreports.com/forum/remark,21307671 Phoenix2088 :
said by Schrody :

Am I pointing to an ISP in India? (3B A5 4D DA)
That is a hex edit that will allow the router to accept the non-Vonage firmware. Not too sure what you are trying to get at.]]> http://www.dslreports.com/forum/remark,21307671 Wed, 22 Oct 2008 10:54:09 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G/RTP300 WITH 5.01.04 http://www.dslreports.com/forum/remark,21307220 anon : Am I pointing to an ISP in India? (3B A5 4D DA)]]> http://www.dslreports.com/forum/remark,21307220 Wed, 22 Oct 2008 09:32:08 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G/RTP300 WITH 5.01.04 http://www.dslreports.com/forum/remark,21303148 anon : Thank you! My RTP300 has been collecting dust for years...now I might get some use from it again!]]> http://www.dslreports.com/forum/remark,21303148 Tue, 21 Oct 2008 14:27:59 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G/RTP300 WITH 5.01.04 http://www.dslreports.com/forum/remark,21290284 mazilo :
said by Phoenix2088 See Profile :

Unfortunately with 5.01.04, I am unaware of a process that will allow you to view the VoIP/SIP settings when the device is in use with Vonage.
Does anyone have the link to download v5.01.04 firmware for RTP300/WRTP54G/PAP2v2?]]> http://www.dslreports.com/forum/remark,21290284 Sat, 18 Oct 2008 22:03:53 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G/RTP300 WITH 5.01.04 http://www.dslreports.com/forum/remark,21287890 Phoenix2088 : You will lose all settings and Vonage will not re-provision the device. This process should only be done with routers that are no longer being used with Vonage. Once the device is unlocked you can use it with any BYOD SIP based VoIP providers.

Unfortunately with 5.01.04, I am unaware of a process that will allow you to view the VoIP/SIP settings when the device is in use with Vonage.]]> http://www.dslreports.com/forum/remark,21287890 Sat, 18 Oct 2008 11:30:19 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G/RTP300 WITH 5.01.04 http://www.dslreports.com/forum/remark,21287116 shycharles : I am a newbie in the Voip Unlocking world. You are telling the entire process, step by step marvelously. One thing you miss though is whether the device from Vonage (in my case RTP300) will be opened and we will be able to see the entire page with User id & Password, domain and port OR does this process wash every setting that was made by the provider and once we do it, we will just be able to use this device with other providers and not (or maybe) with Vonage? I understand your concern about legalities, which do not bother me as such. All I want to do it to be able to see the following:
User ID (generally 1+my Vonage phone number)
Password
Domain
Port (generally 5060 or 5061)
My Firmware version is 5.01.04 or maybe 5.01.14, basically it is the latest firmware. My understanding is that this information is contained under the disabled (by Vonage) Voice button on device's page.

Any help, and I will pray for you, your ancestors, and your later generations. ]]> http://www.dslreports.com/forum/remark,21287116 Sat, 18 Oct 2008 03:39:32 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G/RTP300 WITH 5.01.04 http://www.dslreports.com/forum/remark,21253318 mazilo :
said by Kar :

Hi, I just got a RTp300 and I am wondering what people are using the RTP300 for after unlocking it. Sorry for the newb question
Use it as your router + VoIP to register to any BYOD VoSPs.]]> http://www.dslreports.com/forum/remark,21253318 Sun, 12 Oct 2008 00:10:24 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G/RTP300 WITH 5.01.04 http://www.dslreports.com/forum/remark,21251521 anon : Hi, I just got a RTp300 and I am wondering what people are using the RTP300 for after unlocking it. Sorry for the newb question]]> http://www.dslreports.com/forum/remark,21251521 Sat, 11 Oct 2008 15:43:43 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G WITH 5.01.04 http://www.dslreports.com/forum/remark,21180334 anon : :)This is great !!! I'm a novice network config guy. I just followed step by step the procedure and voila ! Million thanks. It worked great.]]> http://www.dslreports.com/forum/remark,21180334 Sat, 27 Sep 2008 23:37:54 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G WITH 5.01.04 http://www.dslreports.com/forum/remark,21150669 Phoenix2088 :
said by kcallis See Profile :

Once the change is made to unlock a Vonnage RTP300, do I lose all of my setting for the port 1 Vonnage information?
Yes, you will lose all settings. Do not do this procedure with a Vonage box that you are currently using, Vonage will not be able to re-provision it.]]> http://www.dslreports.com/forum/remark,21150669 Mon, 22 Sep 2008 16:09:25 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G WITH 5.01.04 http://www.dslreports.com/forum/remark,21144692 GrauerFuchs :
said by kcallis See Profile :

I am not overly concerned with the TOS... What I am concerned about is that fact that I have an additional port that I could be using in conjunction with my asterisk box, and I have no access to make changes.
Unfortunately, I am stuck with Vonnage for historically reasons, but I really need access to my second port.
You should be concerned about it. When Vonage pushes an update, it will (1) be rejected, or (2) overwrite your settings. They do have the ability to access information on the box, so if they feel you violated the TOS, they'll cancel your account, charge you termination for violation of the TOS, and the whole reason you stayed with them will go up in smoke.]]> http://www.dslreports.com/forum/remark,21144692 Sun, 21 Sep 2008 10:08:47 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G WITH 5.01.04 http://www.dslreports.com/forum/remark,21143645 kcallis : I am not overly concerned with the TOS... What I am concerned about is that fact that I have an additional port that I could be using in conjunction with my asterisk box, and I have no access to make changes.
Unfortunately, I am stuck with Vonnage for historically reasons, but I really need access to my second port.]]> http://www.dslreports.com/forum/remark,21143645 Sat, 20 Sep 2008 23:01:37 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G WITH 5.01.04 http://www.dslreports.com/forum/remark,21141219 mazilo :
said by kcallis See Profile :

Once the change is made to unlock a Vonnage RTP300, do I lose all of my setting for the port 1 Vonnage information?
You should not unlock your device which is currently in service with Vonage. Doing so may violate vonage TOS!]]> http://www.dslreports.com/forum/remark,21141219 Sat, 20 Sep 2008 10:57:23 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G WITH 5.01.04 http://www.dslreports.com/forum/remark,21140562 kcallis : Once the change is made to unlock a Vonnage RTP300, do I lose all of my setting for the port 1 Vonnage information?]]> http://www.dslreports.com/forum/remark,21140562 Sat, 20 Sep 2008 02:56:01 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G WITH 5.01.04 http://www.dslreports.com/forum/remark,21136602 anon : it works, so far this is most perfect solution for vlocked WRTP54G/RTP300. millions thanks.]]> http://www.dslreports.com/forum/remark,21136602 Fri, 19 Sep 2008 12:09:29 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G WITH 5.01.04 http://www.dslreports.com/forum/remark,21133882 Phoenix2088 :
said by asteriskloveerrr :

Hi Phoenix2088, this is wonderful, I'm wondering is this method applying to RTP300 too? thanks for your instruction.
Thanks, no problem. Yes this method will work for the RTP300, but some files need to be substituted. Other than that follow the directions above for the rest of the unlock procedure.

1. Download the following to replace the von10062.bin file contained in the ZIP archive at Step 1 - Part 3. Rename this new file back to von10062.bin. To ensure a proper download use a DOS prompt. The wr and rf files from the ZIP archive are still used for the RTP300.

»httpconfig.vonage.net/rt-11.1.0-···0327.img
or
The DOS prompt will take 5-10 min. The file size is 3,866,632 bytes.

2. This is the RTP300-NA Firmware and will take the place of the firmware at Step 1 - Part 5 and Step 5 - Part 4. Go to the following website, locate and download the firmware. After that you must edit the file for it to run on the RTP300. Use a hex editor and change offset 0x17 from 4D to 4C and offset 0x3B0004 from 85 DA 20 BB to 3B A5 4D DA

»www.linksys.com/servlet/Satellit···ondetail

P.S. - When using the hex editor simply overwrite the file once you are finished.]]> http://www.dslreports.com/forum/remark,21133882 Thu, 18 Sep 2008 21:17:55 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G WITH 5.01.04 http://www.dslreports.com/forum/remark,21133186 anon : Hi Phoenix2088, this is wonderful, I'm wondering is this method applying to RTP300 too? thanks for your instruction.]]> http://www.dslreports.com/forum/remark,21133186 Thu, 18 Sep 2008 19:06:23 EDT Re: [Unlock] TUTORIAL: VONAGE WRTP54G WITH 5.01.04 http://www.dslreports.com/forum/remark,21123085 Phoenix2088 : Step 4: Downgrading Firmware to 1.00.62
1. Ensure that the rf file and von10062.bin from the ZIP archive are in the TFTP32 folder. Power cycle the WRTP54G by unplugging (5 seconds) and replugging the power. Ensure that the wireless is still OFF.

2. Log back into the router and go to Administration >> Ping. Also make sure TFTP32 is running.

3. On the Ping popup, right click >> Web Developer >> Forms >> Remove Maximum Lengths.

Enter the following and click Ping.


Right Click >> Web Developer >> Forms >> Remove Maximum Lengths. Enter the following and click Ping.


Right Click >> Web Developer >> Forms >> Remove Maximum Lengths. Enter the following and click Ping.


You should now see a file transfer in progress under TFTP32. After the firmware has been transferred the power light on the WRTP54G will start to blink if everything is successful. DO NOT INTERRUPT THIS PROCESS. IT MAY TAKE UP TO 2-4 MINUTES TO COMPLETE. WAIT FOR THE POWER LIGHT TO RETURN SOLID AND FOR AN ETHERNET LINK TO BE ESTABLISHED.

Step 5: Unlock with CYT and Load New Firmware
1. Login to the router using admin/admin and leave this window open. Ensure that firmware 1.00.62 has loaded successfully.

2. Open cyt35.exe. Select Option 1. Wait for CYT to provision the WRTP54G. The output for a successful provision will be fairly obvious. This process will take 1-2 minutes.

3. Open a new window and head over to »192.168.15.1/update.html. Login with Admin/Admin or admin/admin.

4. Locate the modified WRTP54G-NA 3.1.17 firmware and initiate the upgrade process. Wait a few minutes and the device will reset itself and take you back to the login page. Username and pass should be admin/admin. Ensure that the firmware is 3.1.17.

Congrats. You now have a fully unlocked WRTP54G!]]> http://www.dslreports.com/forum/remark,21123085 Wed, 17 Sep 2008 00:56:39 EDT [Unlock] TUTORIAL: VONAGE WRTP54G/RTP300 WITH 5.01.04 http://www.dslreports.com/forum/remark,21123078 Phoenix2088 : I have noticed that the information for unlocking the WRTP54G is scattered around in various threads. I am going to try and condense all of this information and make it as easy as possible to help unlock a Vonage/Linksys WRTP54G with 5.01.04 firmware. This is a multi-step process that will require downgrading and then finally upgrading to the WRTP54G-NA firmware.

EDIT: Please refer to the 4th post down for unlocking the RTP300.

Disclaimer: I am by no means taking credit for any of this. All of the hard work is credited to jetzhu See Profile, Velund See Profile, the author(s) of CYT, and anyone else I missed. I also do not take any responsibility if you brick your device. Do this procedure at your own risk!

Step 1: Downloads
1. Download Firefox and install the Web Developer Plugin.
»www.mozilla.com/en-US/firefox/
»https://addons.mozilla.org/en-US/firefox/addon/60

2. Download and install TFTP32. This is a Windows based TFTP server that will push the firmware to the device.
»tftpd32.jounin.net/download/Tftp···etup.exe

3. Download the following ZIP file and extract to the folder TFTP32 was installed in (ex. C:\Program Files\TFTP32). It will contain some of the necessary files that will be required for this unlock procedure.
»rapidshare.com/files/145934487/v···zip.html

4. Download CYT.
»/r0/download/1···in32.zip

5. Download the modified WRTP54G-NA 3.1.17 firmware from the following website. Disregard the instructions on that website.
»celiom.googlepages.com/linksys

Step 2: Configure TFTP32
1. Run TFTP32. Click settings, and then setup the base directory. Use the directory you installed the program (ex. C:\Program Files\TFTP32) and make sure the extracted files from the ZIP are in this directory. Change security to none, and set the timeout and max retransmit to 10 and then hit OK.

Step 3: Unlock the Console using Ping Hack
1. Make sure you have downloaded everything from step 1 and ensure the wr file from the ZIP is in the TFTP32 folder. Now disconnect from the internet and connect directly to the WRTP54G making sure the device is also not connected to the internet (ie. pull the Ethernet cord out of the WAN port). Also make sure to disable any Anti-Virus and firewall programs that may be running.

2. Use a paperclip and hard reset the WRTP54G (hold reset for 10-15 seconds). Go to »192.168.15.1 with the username/pass of admin/admin. Go to Wireless and disable it. Once the router restarts go to Administration >> Ping. Also make sure TFTP32 is running.

3. On the Ping popup, right click >> Web Developer >> Forms >> Remove Maximum Lengths.

Enter the following and click Ping.


Right Click >> Web Developer >> Forms >> Remove Maximum Lengths. Enter the following and click Ping.


Right Click >> Web Developer >> Forms >> Remove Maximum Lengths. Enter the following and click Ping.


After a few seconds you should see some information in the output box. Scroll down to the last line and look for CONSOLE_STATE unlocked. If you see this you are good to go. Go to the next post below to continue the unlock procedure.]]> http://www.dslreports.com/forum/remark,21123078 Wed, 17 Sep 2008 00:55:25 EDT