mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA | reply to yumagah
Re: [Unlock] TUTORIAL: VONAGE WRTP54G/RTP300 WITH 5.01.04
said by yumagah :
I just got a WRTP54G from a resale shop for $5. Which resale shop did you get this WRTP54G for $5? I will be more than happy to get some units. |
|
yumagah
| Taking a hint from other posts here, I have found that plugging in 2 or more devices to ethernet ports gives somewhat better connections. Probably a bad solder connection. Gonna try unlocking this thing, not much to lose.
There is a chain of resale shops in my area run by Goodwill Industries. I check them regularly for used networking junk. I got lucky this time but there is no predicting what will be there on any given day. |
|
Micro23
@vassar.edu | reply to Phoenix2088
I cant for the life of me get my rtp300 to work with my wrt54g and gizmo5 anyone care to help? |
|
Yumagah
| reply to yumagah
Okay. after a few tries I unlocked it. I now have a WRTP54G with 3.1.17 firmware, and I can change setting under the Voice tab. Now will someone here kindly point me to the FAQ or document I need to see what I can do with it? |
|
Kavalco
@psi.br | reply to yumagah
My router have the same problem, the ethernets ports cutting on and off. Them i force the ethernet port of my computer to 10 mbps full duplex and.... the ports up!!! |
|
Antman
join:2009-08-03
Antioch, TN
1 edit | reply to Phoenix2088
I have a RTP300 and have been following the tutorial exatcly as it shows and have downloaded the RTP firmware from Linksys then hexedited it but I never get that far. I do the commands and see the File get downloaded by the router the file "von10062.bin" goes to it then nothing happens. the power light never starts flashing it just never reflashes the router at all. What can I try? I really want to ge this thing unlocked.
**EDIT**
I wanted to add that I did get it done. I didnt rename the img file I downloaded for the RPT300 to von10062.bin. I renamed it then did the steps again and it worked. i then ran cyt35.exe and it did its thing then I was able to upgrade to my hex edited image file I got from the linksys web site and now I am unlocked. I set it up with MagicJack and all is good. Only issue I get sometimes is the adapter sometimes thinks my phone stays off the hook when I do a phone call. But I really appreciate this guide. Thank you to all that made it possible. Vonage told me that since I didnt have Vonage I should either send them back the router or throw it away. LOL! The guy told me if I didnt get Vonage service it wouldnt even function as a router. |
|
yumagah
@ameritech.net
| After reading the post by Kavalco, I hooked up an old 10mbit hub in between, and that seems to have solved the problem with the ethernet ports. I wonder if this thing was meant to support 100mbit, or is it just a hardware problem on mine?
Antman, can you tell me how to set it up with Magicjack? Or show me where is the FAQ on that? |
|
GrauerFuchs
join:2008-01-05 | It is intended to support full 100mbit, but 100mbit requires signaling on more lines than 10mbit. If one of the traces is poor or the chip is flaky, it may lose that signal or have problems with the data transfer. |
|
Antman
join:2009-08-03
Antioch, TN
| reply to yumagah
here is the guide I found for configuring the MagicJack settings: »www.magicjacksupport.com/linksys···942.html
My only issues I am having so far is that if I dont put 1 plus the area code in the RPT300 locks up like the phone is off the hook and no matter what I do it acts like the phone is off the hook. I have to power cycle the router and wait for it to link back up. Magic jack makes me have to put the 1 plus the area code in for every call I do.
Also I am noticing with the RPT300 there is a kinda high pitch noise that come from it sometimes and a click when I pave the phone off the hook or when I put it back on the hook. Is this normal? |
|
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA
| From what I read the post on the above link, it appeared getting an MJ to work on an ATA is back to business. Can anyone confirm this? |
|
Antman
join:2009-08-03
Antioch, TN
| I can confirm it works. I havent had too many issues. I am thinking my RPT300 is having issues though cause it has a noise I can hear when it is plugged in and locks up sometimes when calling people without 1 plus the area code. Follow that guide and make it all look like those pics and it works. Good Luck with it. |
|
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA
| said by Antman  :I can confirm it works. Did you use stroth's method to get the SIP credentials of your MJ? |
|
Antman
join:2009-08-03
Antioch, TN | yes. I used "Stroths MagicJack Utilities Suite" and it got the info for me and placed it in a text file for me. |
|
gaugevox
join:2009-09-23
Canton, OH
| reply to Phoenix2088
First off, thank you all for the helpful information. I just bought an RTP300 and was not aware that it was Vonage-locked one. Following the steps in this forum I have succesfully gotten from Version 5.1.04 to 3.1.22. I thought I'd post a little tip about something that tripped me up for a while. After I had unlocked the router and reset admin passwords using CYT, I could do the initial admin/admin login, but not the Admin/Admin login on the update.html page. I realized Firefox was automatically switching my captial A to a lowercase. I had to switch over to internet explorer to preserve the case of my username and password. Once I did it was a breeze. Just thought I'd share that in case anyone ran into the same problem. |
|
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA
| said by gaugevox :I realized Firefox was automatically switching my captial A to a lowercase. Interesting! I never encountered this problem with a Firefox on my Linux machine. |
|
GrauerFuchs
join:2008-01-05
 ·SIP Phone
| reply to gaugevox
said by gaugevox :I realized Firefox was automatically switching my captial A to a lowercase. I had to switch over to internet explorer to preserve the case of my username and password. Once I did it was a breeze. Just thought I'd share that in case anyone ran into the same problem. I may be wrong here, but it sounds like it's trying to fill things in from the password caching service in Firefox. If so, it might happen in other browsers as well. Either way, thank you for pointing out the potential trouble. It could save many users a boatload of grief when trying to get things working again. |
|
frucomp
@cox.net
|  reply to Phoenix2088
hi Phoenix2088
i have to try unlock my rtp 300, my firmware is 1.00.62 right now  , but i can´t modify the img file with hex editor  , do you have a modified RTP300 NA firmware, thanks a lot |
|
dynavoip
join:2009-10-08
Schenectady, NY
| reply to Phoenix2088
Hello! thank in advance all the help it can get from you, I have a linksys RTP300 and have no access to VOICE, is blocked by Vonage, I have followed all the steps above before mentioned but I'm not getting results, obviously something I'm failing, but not in which, perhaps may be in the last file and not edit it with the hex editor, I have not found that RTP300 I transfer files to and not because I have all files in TFTPD32 and TFTP32 works fine, now when I go 192.168.15.1/update.html enter a password I do not work or admin / admin or admin / admin or user / admin that is to say no, besides if I enter the Admin when I go to be alone again; would be kind enough to collaborate with the steps a little more detailed and the files to use, given that am only new to this.
thanks for the help.
danilo |
|
df1sp
@sbcglobal.net
| reply to Phoenix2088
Hi, I have a WRTP-54G, Firmware 1.00.18
After the last step of Phase 1 (unlock), I do not get the "promised relief".....Console_State unlocked
Rather,
here is the response:
PING 127.0.0.1 &&sh /var/tmp/wr (127.0.0.1): 64 data bytes 72 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=0.0 ms 72 bytes from 127.0.0.1: icmp_seq=1 ttl=255 time=0.0 ms 72 bytes from 127.0.0.1: icmp_seq=2 ttl=255 time=0.0 ms 72 bytes from 127.0.0.1: icmp_seq=3 ttl=255 time=0.0 ms 72 bytes from 127.0.0.1: icmp_seq=4 ttl=255 time=0.0 ms --- 127.0.0.1 &&sh /var/tmp/wr ping statistics --- 5 packets transmitted, 5 packets received, 0% packet loss round-trip min/avg/max = 0.0/0.0/0.0 ms
Any idea anyone what might have happened?
I followed everything....
Thanks - |
|
GrauerFuchs
join:2008-01-05 | Try a single ampersand and a space after it. |
|
