MicroWISP
join:2008-01-30
TX Republic
| reply to Warlok
Re: how can I add speed to the wireless network?
Warlok, try to use channels 1, 6, or 11 only as they do not overlap each other. Channel 3 overlaps channels 1 and 6. In your situation go ahead and put everything on channel 1 and all will work great!
--
"Man who say it cannot be done should not interrupt man doing it." |
|
stevech0
join:2006-09-17
San Diego, CA
 ·RoadRunner Cable
 ·VoicePulse
edit:
September 8th, @11:46PM
| yes, visualize this:
Your WiFi signal occupies 20MHz.
WiFi channels 1 and 6 and 11 are 20+ MHz apart.
Channels 1 to 5 are not.
and so on.
People operating on other than 1, 6 and 11 are creating problems for nearby WiFi systems.
But, some short-sighted soul working with IEEE created these numbered channels long ago before 20MHz was dominant. |
|
