katadi
@charter.com
|  setting up a cisco 871
I am trying to setup a cisco 871 router, I have my wan port setup and dhcp is also setup on vlan1.
here is my issue I only have a dhcp pool of 7 addresses. how can I increase the pool:
here is my config, any help will be appreciated.
hostname test1
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
enable secret 5 .
!
no aaa new-model
!
crypto pki trustpoint TP-self-signed-2443690795
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2443690795
revocation-check none
rsakeypair TP-self-signed-2443690795
!
!
crypto pki certificate chain TP-self-signed-2443690795
certificate self-signed 01
30820251 308201BA A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 32343433 36393037 3935301E 170D3032 30333031 30303037
31305A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D32 34343336
39303739 3530819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100F1FC 13F2BAC2 FBF3D554 90EBB77E E6078F17 4984D03B 0B233A70 AC49346D
89CFA72D 0EF13C64 C71D9465 CF3C6BA2 9E3224D2 985C738C ACB907C8 E96147D3
AB245122 5AE61D5C 0D2FEFE6 D60B4625 FDE33C22 E4D9B882 E9FDA899 5A1072C7
BD723393 2C8AE609 0CC2C073 64B1A579 7C8CD7BF 1BB6B0D9 6A2EE162 AC34744B
40130203 010001A3 79307730 0F060355 1D130101 FF040530 030101FF 30240603
551D1104 1D301B82 19477565 73742D56 6C616E2E 796F7572 646F6D61 696E2E63
6F6D301F 0603551D 23041830 1680140B 427DCCE7 E99EE17D E0CC4A1A 7A6B24D9
196BF730 1D060355 1D0E0416 04140B42 7DCCE7E9 9EE17DE0 CC4A1A7A 6B24D919
6BF7300D 06092A86 4886F70D 01010405 00038181 0083098D D95DF843 87A278B0
A7C0E632 9CCE675A 988A9C25 123F7E37 5B4EBF52 8056A67F 8D0D1C9B F154E666
0605ED7D 30893ED4 4E732E3D 9E6D479D CAE7E25E B0459209 7CD1182B 3050EB62
F99BDE35 81A1F085 29B6480F 7C3FE9B8 80F7DDE9 21E4083A C1B2744D 055924E6
56FA4122 D727D29C 18B2D511 22257158 9B968E73 BB
quit
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1
!
ip dhcp pool sdm-pool
import all
network 10.10.10.0 255.255.255.248
default-router 10.10.10.1
dns-server 75.89.70.20 75.89.74.20
lease 0 2
!
!
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
ip domain name yourdomain.com
ip name-server 75.89.70.20
ip name-server 75.89.74.20
!
!
!
!
!
archive
log config
hidekeys
!
!
!
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
description $ES_WAN$
ip address 75.77.30.178 255.255.255.248
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
!
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
ip address 10.10.10.1 255.255.255.248
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 75.77.30.178
!
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list 100 interface FastEthernet4 overload
!
access-list 23 permit 10.10.10.0 0.0.0.7
access-list 100 remark SDM_ACL Category=2
access-list 100 permit ip 10.10.10.0 0.0.0.7 any
no cdp run
!
!
!
control-plane
!
!
line con 0
login local
no modem enable
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
login local
transport input telnet ssh
!
scheduler max-task-time 5000
end |
|
zinjin
join:2006-12-27
Gretna, LA
 ·Cox HSI
edit:
July 21st, @10:37PM
| ip dhcp pool sdm-pool
import all
network 10.10.10.0 255.255.255.248
default-router 10.10.10.1
dns-server 75.89.70.20 75.89.74.20
lease 0 2
Change 10.10.10.0 255.255.255.248 to 10.10.10.0 255.255.255.0
would give you 253 address, as 10.10.10.1 is excluded.
question why the .248 originally?
Edit..
will also probably need to change this too.
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
ip address 10.10.10.1 255.255.255.248 to 10.10.10.1 255.255.255.0 |
|
Euphrates
join:2007-04-30
Bellingham, WA | From the looks of the config, it seems to be the default 871 factory configuration.
Yup, just checked. I made a copy of my 871's factory config and that's where the .248 subnet comes from. |
|
katadi
@charter.com |  reply to katadi
Thanks Guys,
works ok now, did not see that
it was configure like that from factory. |
|
katadi
@charter.com | reply to katadi
is there a way of setting up this router as a hotspot,
meaning that if someone needs access to the internet connection they will have to enter a key. |
|
aryoba
Premium,MVM
join:2002-08-22 | Is this what you are looking for?
»www.cisco.com/en/US/products/hw/···html#psk |
|
