scj6771
@maines.net
| Cisco 4400 WLC issues
I have setup a Cicso 4400 series wireless LAN controller with software version 5.0.148.0. and a server running the wirless control system (WCS) with software version 5.0.56.2.
I also have setup 2 Cisco LWAPP with a software version of 5.0.148.0.
Now I can see both the controller and the AP's inside the WCS and I can also pickup the wireless SSID from any desktop or laptop but I can not connect to it.
The settings on both the WCS and WLC are pretty much out of the box, I have set no security as of yet so it seems to be wide open.
I understand this is not much to go on but any tips or suggestions you may have would be of great help. Thanks. |
|
tubbynet
Just a green in a sea of blue and red
Premium
join:2008-01-16
Mesa, AZ
 ·Sprint Mobile Broa..
 ·Cox HSI
 ·FrontierNet Intern..
| under the WLAN tab on the WLC, i would be curious to see if the SSID you are trying to connect to has anything related to dot1x or aaa security or something along those lines. if i can recall, my 2006 running 4.2 code had something along those lines that prevented me from connected. it wasn't until i poked around under the ssid that and removed the offending settings that i was able to connect.
q. |
|
