http://www.dslreports.com/forum/r20755889 en Sat, 22 Nov 2008 16:36:24 EDT Sat, 22 Nov 2008 16:36:24 EDT http://www.dslreports.com/forum/remark,20760660 zno : controller T1 0/0/1 channel-group 0 timeslots 1-24controller T1 0/0/2 channel-group 0 timeslots 1-24assuming you have the WIC in slot 0...

--
got anti-virus and firewall?]]> http://www.dslreports.com/forum/remark,20760660 Tue, 08 Jul 2008 19:06:02 EDT http://www.dslreports.com/forum/remark,20758306 Da Geek Kid : well, 1st of all you run the sh contr to see if the device is recognized...

next you do controller command in config t...]]> http://www.dslreports.com/forum/remark,20758306 Tue, 08 Jul 2008 11:58:55 EDT http://www.dslreports.com/forum/remark,20757820 devicemanage : Does your ios support this WIC?
--
»www.devicemanager.net]]> http://www.dslreports.com/forum/remark,20757820 Tue, 08 Jul 2008 10:26:53 EDT http://www.dslreports.com/forum/remark,20756880 kracksmith : it's only a 2811 and WIC is a dual T1 card.

show controllers doesn't bring out the interfaces in the config.]]> http://www.dslreports.com/forum/remark,20756880 Tue, 08 Jul 2008 01:27:55 EDT http://www.dslreports.com/forum/remark,20756850 mysidia : Except in high-end models, hot swap of WAN Interface Cards is generally not supported.

You haven't indicated what model gear and what type of WIC. But you most likely need to power cycle.]]> http://www.dslreports.com/forum/remark,20756850 Tue, 08 Jul 2008 01:15:51 EDT http://www.dslreports.com/forum/remark,20756084 Da Geek Kid : show controllers]]> http://www.dslreports.com/forum/remark,20756084 Mon, 07 Jul 2008 21:50:16 EDT http://www.dslreports.com/forum/remark,20755889 kracksmith : I just inserted a new dual port WIC for a new P2P. Current config doesn't auto recognize. what command do i type in to be able to see these new intefaces?]]> http://www.dslreports.com/forum/remark,20755889 Mon, 07 Jul 2008 21:05:19 EDT