  Pizz Hi
join:2000-10-27 Astoria, NY
·RoadRunner Cable
·AT&T CallVantage
| [TWC] TV and Phone - HSI Went out modem log entry? Any idea
2008-07-07 01:40:44 7-Information Channel Change Complete - Enabling Bridge 2008-07-07 01:40:38 3-Critical R02.0 No Ranging Response received - T3 time-out 2008-07-07 01:40:37 3-Critical R02.0 No Ranging Response received - T3 time-out 2008-07-07 01:40:33 3-Critical R02.0 No Ranging Response received - T3 time-out 2008-07-07 01:40:32 5-Warning SYNC: US Gain in cache is invalid: 0.00 2008-07-07 01:40:31 7-Information Starting Ranging On Channel 1 2008-07-07 01:40:30 7-Information Upstream Channel Change Requested - Disabling Bridge |
|
  dmmostefdy
@verizon.net | post the modem signal levels the log is somewhat useless. |
|
  MacLeech The one and only Premium,MVM join:2001-07-14 SoCal
edit: July 7th, @05:30PM
| reply to Pizz The CMTS told the modem to change upstream channels. So the modem complied, disconnecting the connection to the ethernet port, changed to the new upstream channel, found it's previously stored upstream level invalid on the new channel, re-ranged on the new upstream channel, and finally re-enabling the ethernet port.
That would mean multiple upstream channels are available. Either for noise avoidance or for more bandwidth. |
|
  Pizz Hi
join:2000-10-27 Astoria, NY
·RoadRunner Cable
·AT&T CallVantage
| reply to Pizz Here you go Dmmostefdy
Frequency 687000000 Hz Signal to Noise Ratio 38 dB Downstream Modulation QAM256 Network Access Control Object ON Power Level 0 dBmV The Downstream Power Level reading is a snapshot taken at the time this page was requested. Please Reload/Refresh this Page for a new reading
Channel ID 1 Frequency 38496000 Hz Ranging Service ID 2937 Symbol Rate 2.560 Msym/s Power Level 46 dBmV Upstream Modulation [2] QPSK [3] 16QAM
Signal Stats Value Total Unerrored Codewords 191103563 Total Correctable Codewords 8 Total Uncorrectable Codewords 578990
Mac, thanks again, but can tell you me why i now see this.
1970-01-01 00:00:02 7-Information Scanning frequency 687000000Hz 1970-01-01 00:00:01 7-Information Trying to synchronize ... 1970-01-01 00:00:01 7-Information Vendor Cold Start 2008-07-07 01:41:44 7-Information Channel Change Complete - Enabling Bridge 2008-07-07 01:41:38 3-Critical R02.0 No Ranging Response received - T3 time-out 2008-07-07 01:41:37 3-Critical R02.0 No Ranging Response received - T3 time-out 2008-07-07 01:41:33 3-Critical R02.0 No Ranging Response received - T3 time-out |
|
  MacLeech The one and only Premium,MVM join:2001-07-14 SoCal
| said by Pizz :Mac, thanks again, but can tell you me why i now see this. 1970-01-01 00:00:02 7-Information Scanning frequency 687000000Hz 1970-01-01 00:00:01 7-Information Trying to synchronize ... 1970-01-01 00:00:01 7-Information Vendor Cold Start That looks like the modem suddenly lost power and is starting to resync. |
|
  Pizz Hi
join:2000-10-27 Astoria, NY | reply to Pizz yes, its been doing it quite bit now. Called up time warner, they want to send out a tech. Logs are going nutty, dunno what else to do. speed is badly down as well, getting 5mbps down and 705 up while im suppose to be getting 15/768 |
|