How to Forwards Ports on the Siemens SE 567 in Telus http://www.dslreports.com/forum/r20624660 en Mon, 01 Dec 2008 19:20:55 EDT Mon, 01 Dec 2008 19:20:55 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20864240 Ishan05 : wow telus sent u guys a new router .... they wont send me a 2wire instead of my siemens .. wut do i do??! i wanna play online on ps3]]> http://www.dslreports.com/forum/remark,20864240 Tue, 29 Jul 2008 01:00:52 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20783537 JammerMan79 : even with the problems that the Siemens has... it's still much better than the 604+ was]]> http://www.dslreports.com/forum/remark,20783537 Sun, 13 Jul 2008 06:55:04 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20781658 thewildpig : The Siemens is a piece of garbage. Even a Telus rep told me to keep using my existing D-Link DSL-604+ until it dies.]]> http://www.dslreports.com/forum/remark,20781658 Sat, 12 Jul 2008 18:31:39 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20755582 psydfx : username: admin
password: telus]]> http://www.dslreports.com/forum/remark,20755582 Mon, 07 Jul 2008 20:06:52 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20754074 anon : Does anyone know the default username and password for the siemens se567? I want to forward ports but it wont let me access anything. I tried admin - admin but it didn't work. ??]]> http://www.dslreports.com/forum/remark,20754074 Mon, 07 Jul 2008 15:15:19 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20687335 anon : Work from my screenshots I posted. It should forward it correctly.]]> http://www.dslreports.com/forum/remark,20687335 Mon, 23 Jun 2008 17:39:56 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20673184 supermanbob : sorry, i tried everything. it does not work. telenet does even work for that port either. ]]> http://www.dslreports.com/forum/remark,20673184 Fri, 20 Jun 2008 14:36:26 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20671120 psydfx : Turn off DMZ. It'll likely conflict with the manual port forwarding. Also make sure you didn't enable uPnP as this can conflict if you're manually doing port forwarding.

Since you're trying to see if you can pass traffic between two different IPs behind the router see if you can connect from the PC to the PS3.
Are you able to telnet to 192.168.254.30 port 5223 from the PC? Anything behind the router shouldn't be affected by the router's firewall, so if you can't connect then port 5223 might not be turned up on your ps3.

I need sleep. Good luck. I'll check back tomorrow.
--
the opinions expressed herein are my own and do not represent my employer in any way]]> http://www.dslreports.com/forum/remark,20671120 Fri, 20 Jun 2008 03:34:14 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20671112 supermanbob : i have finally created a account ..

anyways please ignore (make settings last for 60 mins in the 2nd screen and ignore redirected selected to protocol in the last screen. I did not use that ip. I used the same one as my ps3)..]]> http://www.dslreports.com/forum/remark,20671112 Fri, 20 Jun 2008 03:25:22 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20671104 anon : here you go.

»i31.tinypic.com/m9aj37.jpg

if you want to chat on aim just let me know.]]> http://www.dslreports.com/forum/remark,20671104 Fri, 20 Jun 2008 03:16:27 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20671050 psydfx : What ports are you trying to forward?

Take some snapshots of your ipconfig and of the address translation page on your SE567 and post them.
--
the opinions expressed herein are my own and do not represent my employer in any way]]> http://www.dslreports.com/forum/remark,20671050 Fri, 20 Jun 2008 02:56:57 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20671042 anon : I do not have any software firewall installed on my computer. My windows firewall is disabled. I have tried everything. I know how to forward ports. I have done it in the past with other routers. This is my 3rd router that Telus has sent me. ]]> http://www.dslreports.com/forum/remark,20671042 Fri, 20 Jun 2008 02:52:31 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20671032 psydfx :
said by xvzxcvzcxv :

i am so upset on how telus does not support this product at all. siemens does not even support this product at all. time to ditch this piece of junk and just maybe ditch telus? perhaps, move onto shaw?
If you can't figure out how to use the one TELUS provides you then you can always call and request a Thomson Speedtouch (simple modem) rather than an integrated router/modem combination like the Seimen's. Then you can use your own router.
said by Pat Magroin :

you are one of the luckier ones. Congrats on you having a router that works. Whats your secret?
No secret. I've configured dozens of these things and never had any problem. As I said before, the main problem I see users overlooking is software firewalls, especially the Windows firewall.
--
the opinions expressed herein are my own and do not represent my employer in any way]]> http://www.dslreports.com/forum/remark,20671032 Fri, 20 Jun 2008 02:47:45 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20670991 anon : you are one of the luckier ones. Congrats on you having a router that works. Whats your secret?]]> http://www.dslreports.com/forum/remark,20670991 Fri, 20 Jun 2008 02:25:37 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20669517 anon : i am so upset on how telus does not support this product at all. siemens does not even support this product at all. time to ditch this piece of junk and just maybe ditch telus? perhaps, move onto shaw? ]]> http://www.dslreports.com/forum/remark,20669517 Thu, 19 Jun 2008 21:28:15 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20669594 psydfx : And since a picture speaks louder than words.. I just port turned on my sshd and port fowarded it and took a couple snaps of before and after. IP has been masked but you can clearly see it works without any problems and took all of about 45 seconds to set up.

Also, if you do use »www.canyouseeme.org/ pay attention to whether the reason it's failing is a connection timing out or connection refused. If you get connection refused, your port is forwarded but you have nothing to connect to.
--
the opinions expressed herein are my own and do not represent my employer in any way
Click for full size
]]> http://www.dslreports.com/forum/remark,20669594 Thu, 19 Jun 2008 20:29:35 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20669490 psydfx : I've had utorrent's check come up and say blocked one minute and then a minute later it'll say it's not blocked. So I don't fully trust it, I'd rather use something that I know works for checking to be 100% sure.

If it works for you though, that's great.
--
the opinions expressed herein are my own and do not represent my employer in any way]]> http://www.dslreports.com/forum/remark,20669490 Thu, 19 Jun 2008 20:14:01 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20669481 JammerMan79 : I use utorrent to check if the port forwarding is working correctly... ]]> http://www.dslreports.com/forum/remark,20669481 Thu, 19 Jun 2008 20:11:30 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20669468 psydfx : I've never had any problem port forwarding both the Seimens and the 2wire.

Almost everytime I've come across someone having problems with port forwarding is due to a software firewall causing conflicts.

Let me add that if you're trying to verify that the port is open by using some sort of ping check or something like »www.canyouseeme.org/ you have to make sure you have something serving on the port you're testing or it will have nothing to connect to and will appear the same way if you didn't have the port forwarded.

This is the problem with using those programs with torrent software, a lot of the time the software uses a port range and randomly opens ports within that range. It's pretty hard to verify if the port isn't actively being served to.

If you go to a terminal command prompt and open a connection by typing 'telnet localhost port#' and it says connection refused then you don't have anything hosted on that port for the rest of the world to see as 'open'.
ie 'telnet localhost 22' to check to see sshd is running properly.
--
the opinions expressed herein are my own and do not represent my employer in any way]]> http://www.dslreports.com/forum/remark,20669468 Thu, 19 Jun 2008 20:10:29 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20669463 JammerMan79 : have you tried to use it as a standard modem?
apparently if you just plug a router directly in it will immediately switch to that mode
--
I may work for, but do not necessarily represent the views and beliefs of TELUS Communications.]]> http://www.dslreports.com/forum/remark,20669463 Thu, 19 Jun 2008 20:09:57 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20669370 anon : well i am on my third SE 567. I know how to portforward and all. i have done it in the pass with other routers. I am simply throwing this one away and I am planning to buy a new one. Well i dont have to throw it away completey. I can just disable the router on this one and bridge the modem with a different router.]]> http://www.dslreports.com/forum/remark,20669370 Thu, 19 Jun 2008 19:53:52 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20669340 JammerMan79 : my utorrent's have 2 different ports opened (so I can seed)
my homesitter camera's can both send and receive information (on 2 different ports each, if i remember correctly)
my dsm-320 (can't remember)
my xbox (can't remember)
my slingbox has ports opened so it can both send and receive information

I do NOT use static ip's for any of my devices.

--
I may work for, but do not necessarily represent the views and beliefs of TELUS Communications.]]> http://www.dslreports.com/forum/remark,20669340 Thu, 19 Jun 2008 19:46:56 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20669273 anon : but are you allow to open any ports on the Siemens se 567? It will say on my router that it is open but its not really. Its blocked. I even have a DMZ option for my ps3 yet, i am still having problems with this. ]]> http://www.dslreports.com/forum/remark,20669273 Thu, 19 Jun 2008 19:30:35 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20669219 JammerMan79 : not quite sure why everyone's having issues with it...
I have 2 computers running on it... utorrent on both and have not had any issues.
I also have the TELUS homesitter service w/2 wireless camera's and was able to set up the port forwarding for
that as well (it was a pain but that's a "normal" setup)
I also have my dlink dsm-320 and my xbox running without issues....
PLUS I have my slingbox running on it and was able to configure that to work.

Seriously I don't know what's going on with your units.

edit: I should state that I've had all these running previously. I'm using the 2wire currently due to my line conditions (same setup)
--
I may work for, but do not necessarily represent the views and beliefs of TELUS Communications.]]> http://www.dslreports.com/forum/remark,20669219 Thu, 19 Jun 2008 19:18:30 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20669160 anon : i was on the phone with telus for 3 hours yesterday, and pretty much i got bossed around. Telus does not support this product at all. Neither does Siemens. I got about 10 different phones numbers and 6 of them were dead, and the rest were phone numbers to other companies.

Today, i was finally able to get a correct siemens phones number, but all the guy said was go to portforward.com or go to dslreports.com.. i just laughed at the guy.. i told him that everyone from those sites are having the same problems as me. He then told me that I should call their department in the morning for proper assistance. Apparently they are located in IRELAND and that its best for us to call them 9am in the morning (our time).

This is compeltly bullshit if you ask me. Everyone from Telus has no idea whats going on. My advice, return this product ASAP or try to bridge it (have not tried that).

You can do whatever you want to port forward but this product will not support it. Blame TELUS. ]]> http://www.dslreports.com/forum/remark,20669160 Thu, 19 Jun 2008 19:05:21 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20669048 anon : Thank you so much!]]> http://www.dslreports.com/forum/remark,20669048 Thu, 19 Jun 2008 18:41:29 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20667094 psydfx : Put the gateway address as your preferred DNS. You keep using 192.168.0.1 but you don't have anything on that address. Your modem is your gateway and it is 192.168.1.254. Either that or simply leave the DNS options blank and it'll automatically use the gateway for DNS.
--
the opinions expressed herein are my own and do not represent my employer in any way]]> http://www.dslreports.com/forum/remark,20667094 Thu, 19 Jun 2008 11:53:20 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20665853 anon : I wasn't able to establish an internet connection using these settings. I'm not that computer smart, so if you can please explain what I'm doing wrong.
»img262.imageshack.us/img262/8060···4od2.jpg]]> http://www.dslreports.com/forum/remark,20665853 Thu, 19 Jun 2008 04:17:00 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20664225 psydfx : Your gateway address is incorrect and so is the IP range you're using. Try setting the IP to 192.168.1.196 on the modem and your computer and set the Gateway address to the modem's address of 192.168.1.254.

Try that.
--
the opinions expressed herein are my own and do not represent my employer in any way]]> http://www.dslreports.com/forum/remark,20664225 Wed, 18 Jun 2008 20:27:43 EDT Re: How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20663229 anon : Nothing from no one?
No one can forward ports on this piece of a modem?]]> http://www.dslreports.com/forum/remark,20663229 Wed, 18 Jun 2008 16:49:28 EDT How to Forwards Ports on the Siemens SE 567 http://www.dslreports.com/forum/remark,20624660 anon : I read the post on how SE 567 is similar to other models, however I still cannot get mine to work. Here is my current configuration:
»img385.imageshack.us/img385/2920···4zv6.jpg

What am I missing? I made the Static IP, and I believe I made the correct changes to the Port Forwarding part. Am I missing something?]]> http://www.dslreports.com/forum/remark,20624660 Tue, 10 Jun 2008 23:54:03 EDT