KoRnGtL15
Premium
join:2007-01-04
Grants Pass, OR
edit:
May 9th, @08:13PM
| reply to Tursiops_G
Re: [Wired] Very annoying problem.......
Thanks again for all the help. I came across a interesting post on avsforums in the Xbox area. What do you think? If I just disabled DHCP within my router settings. And then enable UPNP would this work instead of using the port forwarding method?
"FWIW.. And I will admit I havent read this whole thread so apologize if someone suggested this already.
I use DD-wrt firmware.
I have found that all port forwarding issues have been solved by allowing the ROUTER to distribute STATIC ips. IOW, each device on network set to obtain automatically. Then in the router software assign an ip address to each device by mac address. Now enable upnp. THe router will now always assign the same static ip to each device because that ip is matched to its mac address. DNS still must be enabled but you can limit it to the number of devices you are assigning if you prefer.
You essentially have static ips, but they are still distributed by the router. UPNP apparently works better when the network is dishing out ips. Probably related to having dns enabled as many will disable it when they use static ips.
You will no longer need to forward ports because upnp will take care of everything."
Steve
**EDIT**
Just found out you need 3rd part fw to do that. Which I will not use. |
