d_l
Barsoom
Premium,MVM
join:2002-12-08
Reno, NV
| reply to martyp
Re: [Modem] quick modem qustion and stats
That's ok. The 4100b squeezes a little more attenuation and noise margin improvement out of the loop, but no more speed unless the line is having problems.
The 4100 has a nifty diagnostic that seems to be undone by the 4100b: »SBC DSL FAQ »What do the hybrid numbers mean and what do they tell you about your line? |
|
martyp
join:2004-01-30
Vallejo, CA | reply to d_l
just say 4100 then model#060-d141-a39 |
|
d_l
Barsoom
Premium,MVM
join:2002-12-08
Reno, NV | reply to martyp
The label sticker on the bottom has the modem version. |
|
martyp
join:2004-01-30
Vallejo, CA | reply to d_l
mmm have to look any way to tell the 4100 from 4100b |
|
d_l
Barsoom
Premium,MVM
join:2002-12-08
Reno, NV | reply to martyp
Those are pretty good. If they stay that good, you will not have problems.
Is the new modem a 4100 or a 4100b? |
|
martyp
join:2004-01-30
Vallejo, CA
 ·AT&T DSL Service
| Ok just what i hope is a quick question.
I installed a 4100 to replace my old 4 light 5100.
Before I put it in front of the router I got some stats off of it .
Line State UP
Modulation ANSI
Data Path fast
To Modem To Internet
Max Allowed Speed (kbps) 6016 768
SN Margin (dB) 10.5 -
Line Attenuation (dB) 36.5 -
Loss of Signal 0 -
Loss of Frame 0 0
CRC Errors 1 2
are these good or bad stats? |
|
