 netwirePremium
join:2001-04-27
Shelby, NC
kudos:1
 ·AT&T Southeast
| reply to mjwalfredo
Re: Evdo Tweaks and Tuning said by mjwalfredo:Damn, nobody knows which profile to set the HA on for a Sierra Wireless card? My speeds are killing me. Please help! You should set the HA to one nearest to you. For example, I live in NC so I have mine set to GA. |
|
| LOL, yeah I understand that! My problem is that with a Sierra Wireless card there is profile 0 and profile 1. Profile 0 currently has a Primary/Secondary HA and it's NOT one listed above. When I change it to one of those, I cannot connect and I cannot even update the data profile.
If I try and set the HA on profile 1, the settings are lost as soon as the card restarts.
I need someone who has successfully changed their HA with a Sierra Wireless card to tell me how they did it to either to show me how or to confirm that I have a problem with my setup. |
|
 hjriverhjriver
join:2006-12-03
North, VA | reply to netwire
said by netwire:said by mjwalfredo:Damn, nobody knows which profile to set the HA on for a Sierra Wireless card? My speeds are killing me. Please help! You should set the HA to one nearest to you. For example, I live in NC so I have mine set to GA. How do you change it?
--
HN7000S/Satmex6/1190/0.78/pro-plus/Sig level: 65 |
|
 Jim_in_VA
join:2004-07-11
Cobbs Creek, VA
kudos:4
 ·Northern Neck Wi..
| hj, I am up in Boston this week. Drove all the way from VA to MA and was connected to EVDO the entire way. Never dropped the signal.
On changing the HA on the Franklin. Launch connection manager but do not connect to the network. Move your cursor over the plus sign on the left (it will change color slightly),hold down the shift key and type ##DATA. A box will appear asking for a code. This is the 6 digit activation code you must get from Millenicom. Just call their tech support and they will give it to you. After the code is entered a data box will pop up. This is where you enter the HA #'s like the one's found at the top of this post. I found the Kansas City numbers to work best for me. Experiment with different one's to find what is suitable. |
|
hjriverhjriver
join:2006-12-03
North, VA
1 edit | said by Jim_in_VA:hj, I am up in Boston this week. Drove all the way from VA to MA and was connected to EVDO the entire way. Never dropped the signal. On changing the HA on the Franklin. Launch connection manager but do not connect to the network. Move your cursor over the plus sign on the left (it will change color slightly),hold down the shift key and type ##DATA. A box will appear asking for a code. This is the 6 digit activation code you must get from Millenicom. Just call their tech support and they will give it to you. After the code is entered a data box will pop up. This is where you enter the HA #'s like the one's found at the top of this post. I found the Kansas City numbers to work best for me. Experiment with different one's to find what is suitable. I did find out my IP address is 70.7.196.49 located in San Jose, CA. I need to get it changed. None of the numbers on the fist post seem to match the one I have.
--
HN7000S/Satmex6/1190/0.78/pro-plus/Sig level: 65 |
|
