mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA
| reply to vhl
Re: Unlock Linksys PAP2-VN
said by vhl  :try this admin password 7756112 or 8995523 or 50274537 Ain't these admin passwords set by Vonage through some provisions? If so, then they are not going to work because the OP has a PAP2-VN from Verizon unless Verison is so stupid to use the same admin password through their provisions. |
|
yahoo2003
join:2007-11-02
Mclean, VA
| said by mazilo :said by vhl :try this admin password 7756112 or 8995523 or 50274537 Ain't these admin passwords set by Vonage through some provisions? If so, then they are not going to work because the OP has a PAP2-VN from Verizon unless Verison is so stupid to use the same admin password through their provisions. It is true those passwords are for Vonage firmware to reset PAP2 using IVR.
I can reset my new PAP2-VN without password through IVR.
My problem is I could not get into web interface without password.
I have never connected my PAP2-VN to internet. I installed sniffer and found only outgoing messages are:
"Gratuitous ARP for 192.168.1.100", "Who has 192.168.1.1? Tell 192.168.1.100".
I found DNS address for my PAP2-VN is "213.137.73.254" by IVR.
My pap2 doesn't search for "lsys$MAC.cfg" file at tftp server "213.137.73.74" as butlerj2000's provisioned PAP2-VN.
I am not sure this is because my PAP2-VN is still a "virgin" or because I did not connect my router to internet.
I found only butlerj2000 and meister_sd tried to unlock PAP2-VN by software last year without success.
I believe meister_sd is the only person posted ways to unlock any PAP2s including PAP2-VN by hardware. |
|
vhl
join:2007-11-02
Westminster, CA | I have a pap2, I think it was dead lock. here is my post " »linksys pap2, strange problem ". Could you show me meister_sd' hardware unlock post? Thanks. |
|
meister_sd
Premium
join:2006-01-29
La Mesa, CA
| reply to yahoo2003
said by yahoo2003 :My pap2 doesn't search for "lsys$MAC.cfg" file at tftp server "213.137.73.74" as butlerj2000's provisioned PAP2-VN. How do you know that it isn't asking for the file? Are you using Ethereal/Wireshark? I have a couple of pap2-vn's and they all are trying that address.
Here is what I do. I have a computer with two NICs. The main NIC I set with an IP of 213.137.73.74 and use Internet Connect Sharing (ICS). The second NIC is connected to the pap2 using a crossover cable (I think a regular will work on a pap2) and have a tftp server running. The pap2 will attempt to get the file after about 20 seconds. This file I created that has no passwords in it. So after the pap2 gets the file - there are no more passwords in the unit. If you do a factory reset, then all the -VN stuff loads, but otherwise you can use it on any other service. PM me with your email address for the file. |
|
yahoo2003
join:2007-11-02
Mclean, VA
| reply to vhl
said by vhl :I have a pap2, I think it was dead lock. here is my post " » linksys pap2, strange problem ". Could you show me meister_sd' hardware unlock post? Thanks. This is from my book mark
»Re: RT31P2 Unlock thoughts?? |
|
yahoo2003
join:2007-11-02
Mclean, VA
1 edit | reply to meister_sd
said by meister_sd :said by yahoo2003 :My pap2 doesn't search for "lsys$MAC.cfg" file at tftp server "213.137.73.74" as butlerj2000's provisioned PAP2-VN. How do you know that it isn't asking for the file? Are you using Ethereal/Wireshark? I have a couple of pap2-vn's and they all are trying that address. Here is what I do. I have a computer with two NICs. The main NIC I set with an IP of 213.137.73.74 and use Internet Connect Sharing (ICS). The second NIC is connected to the pap2 using a crossover cable (I think a regular will work on a pap2) and have a tftp server running. The pap2 will attempt to get the file after about 20 seconds. This file I created that has no passwords in it. So after the pap2 gets the file - there are no more passwords in the unit. If you do a factory reset, then all the -VN stuff loads, but otherwise you can use it on any other service. PM me with your email address for the file. I was using "Wireshark" without tftp server running. I will try the configurations you have suggested. Thanks for the detailed instructions.
I found another excellent post by you
»Re: RT31P2 Unlock thoughts??
I may need to "provision" my new PAP2-VN but I will try without "provision" it first.
It seems I also need a DNS server, the PAPs started to send DNS request "Standard query A Viper tftp.deltathree.com".
I will download the "simpledns" dns server.
I have limited knowledge on networking and have learned a lot in a couple of days. |
|
