Heat305
join:2007-01-11
El Paso, TX
 ·AT&T Southeast
| reply to Brian Grif_n
Re: CallCentric
Just in case the pm I sent you was incomplete I posted the dial plan here for you in the jpeg. |
|
Brian Grif_n
Wireless Guru
join:2001-01-17
Reno, NV
| Thanks for posting the screenshot. I see that the greater-than/less-than symbols and everything in-between get deleted when you post - an HTML thing.
I tried your plan which did not work - I don't think my AC-211-SR recognizes those symbols in a dialplan.
When corresponding with Callcentric, to get 7-digit dialing they had me use "p(xxxxxxx)1ACO" as part of my dialplan string. ACO=Area Code. That worked for 7 digit dialing, but I could not dial 10- or 11-digit numbers - I would get a fast busy as soon as I started dialing over 7 digits.
After some experimenting this morning, I tried putting a "T" at the end of the numbers, resulting in ""p(xxxxxxxT)1ACO" - which allowed me 7- and 11-digit dialing, but not 10-digits.
I finally came up with the following dialplan which allows 7, 10 and 11-digit dialing on my AC-211-SR:
(>#|[3469]11|00|p(xxxxxxxT)1775|p(xxxxxxxxxxT)1|1[2-9]xxxxxxxxx|**275*x.T|*x.T)
I don't dialing internationally, so that part was removed from my dialplan.
--
Check out my website: www.renowirelessinfo.com |
|
Heat305
join:2007-01-11
El Paso, TX
·AT&T Southeast
| I am glad you finally got it working. Like I said with SR Gizmos many will need to do some more research on how to get these dial plans to work. But if you like the ATA then I don't see why you can't use it.
I haven't seen any other ( BYOD ) provider being as helpful as CC when it comes to non generic SIP ATAs. I have had great call quality with them. Please come back and post whenever you had time or an update about them. Have a good one!!! |
|
