Search:  

 
 
   All ForumsHot TopicsGallery






how-to block ads


 
Forums » Benchmarking the MD3000 powervault under linux » Benchmarking? I think not.
Search Topic:
Share Topic:
RSS topic:
toggle:
flat / full
normal / watch
Post a:
Post a:
« Interesting  
AuthorAll Replies


justin
Australian
join:1999-05-28
Brooklyn, NY

Host:
IPv6
Business Connectiv..
Home/Office setup ..
Console/Handheld g..
Console Tech
reply to fcisler
Re: Benchmarking? I think not.

Yeah I know there are instances of upgrades killing features that optimize for speed. Happens all the more often when there are layers involved for instance for a while LVM killed performance that you got out of the underlying devices. I tend not to automatically upgrade critical production stuff that works unless I need a new feature, for that very reason.

Not concerned here because the dots are all joined up. The spec published by IBM (but not Dell) matches the throughput test I've done, which matches the benchmarks done on the all.thingsit blog, give or take 20%. lower level benchmarks match higher level ones. Stuff like that.

As for RAID5 I've not tested it yet but that is very clearly what the IBM manual says vs RAID10. Something about the firmware in the controllers optimized for RAID5 LUNs It may not really be worth it because if the whole shabang is capped at around 400mb/sec or so then there isn't a lot of point increasing sequential read throughput from 200mb/sec to perhaps 300mb/sec with the potential to slightly decrease write speed unless you really need the extra space RAID5 provides. There is also the issue that if all the drives are the same age they may start failing in batches and in that case you probably want RAID10 not RAID5 as it can suffer more drive failures!

The MD3000 stores the firmware on the pluggable controllers (I think). Anyway, it stores nothing on the drives thats for sure. The firmware isn't very large, or complex. It does support some basic performance collection so you can check if you have drive hot spots but the management interface does not give you any tools to review this info - you're on your own sucking that data out and plotting it or whatever. There are also those two "unlockable" features at ridiculous cost to look at (LUN copy and LUN snapshot). I'm not bothering with them because LVM2 gives the same thing for free.
Forums » Benchmarking the MD3000 powervault under linux« Interesting  


Monday, 23-Nov 04:49:00 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 10 years online! © 1999-2009 dslreports.com.
page compression OFF
Most commented news this week
· [228] Weekend Open Thread
· [117] Verizon Again Hints At Metered Billing
· [98] There's Still No Evidence That Metered Billing Is Necessary
· [97] Will AOL's Implosion Ever End?
· [85] Spain Declares Broadband A Legal Right
· [75] Deploying FTTH Without Digging Things Up
· [74] Verizon To Be Tested By Unofficial Droid Tethering
· [74] Femtocells Are A No Show
· [67] Verizon To AT&T: The Truth Hurts
· [60] Chicago Tribune Visits 'Comcast University'
Most people now reading
· Connecting to Google Voice Via SIP [VOIP Tech Chat]
· [How to] Install Asterisk on an Asus WL-520GU router [VOIP Tech Chat]
· You get ONE WoW wish... what would you do? [World of Warcraft]
· TekSavvy Price Increase? [TekSavvy]
· Extra charge to use Master Card instead of Visa? [General Questions]
· [ Professions] Northrend Herbalism and Mining Tracks [World of Warcraft]
· Sealing air ducts [Home Repair & Improvement]
· MLPPP and MikroTik [TekSavvy]
· Here's a chart comparing the top VoIP providers. Comments? [VOIP Tech Chat]
· How to create ISO with nero 8 [Software]