Deliberant 1300 falls "asleep" in Wireless Service Providers http://www.dslreports.com/forum/r14342787 en Thu, 26 Nov 2009 19:34:02 EDT Thu, 26 Nov 2009 19:34:02 EDT Re: Deliberant 1300 falls "asleep" http://www.dslreports.com/forum/remark,14347493 davidpaj :
said by uscomputing See Profile :

Can you temporarily set a pc to ping the AP so the traffic never goes dead?
That's the only solution so far I found so far]]> http://www.dslreports.com/forum/remark,14347493 Mon, 12 Sep 2005 15:13:34 EDT Re: Deliberant 1300 falls "asleep" http://www.dslreports.com/forum/remark,14347209 uscomputing : Can you temporarily set a pc to ping the AP so the traffic never goes dead?]]> http://www.dslreports.com/forum/remark,14347209 Mon, 12 Sep 2005 14:27:22 EDT Re: Deliberant 1300 falls "asleep" http://www.dslreports.com/forum/remark,14347163 davidpaj :
said by bito See Profile :

Did this just start happening?
Yes, the AP had been turned on maybe 20 minutes at most and it just started. ]]> http://www.dslreports.com/forum/remark,14347163 Mon, 12 Sep 2005 14:20:12 EDT Re: Deliberant 1300 falls "asleep" http://www.dslreports.com/forum/remark,14346560 bito : Did this just start happening?]]> http://www.dslreports.com/forum/remark,14346560 Mon, 12 Sep 2005 12:45:34 EDT Re: Deliberant 1300 falls "asleep" http://www.dslreports.com/forum/remark,14346252 davidpaj :
said by bito See Profile :

After it drops the clients, can they still get back on if they try to initiate any sort of traffic?
No, I was thinking they could, but the connection is dead until a site survey is done on the AP. Once that is done if traffic is constant enough to beat the expire timer... everything is fine]]> http://www.dslreports.com/forum/remark,14346252 Mon, 12 Sep 2005 11:58:37 EDT Re: Deliberant 1300 falls "asleep" http://www.dslreports.com/forum/remark,14346165 bito : After it drops the clients, can they still get back on if they try to initiate any sort of traffic?]]> http://www.dslreports.com/forum/remark,14346165 Mon, 12 Sep 2005 11:41:19 EDT Re: Deliberant 1300 falls "asleep" http://www.dslreports.com/forum/remark,14345961 davidpaj :
said by dongato17 See Profile :

The problem with the 2300 has been identified as a WLAN driver bug in the realtek driver, and we are waiting for the fix from them. This is the first time we have had this problem come up for the 1300, which is a different WLAN driver.

What is the X in the X amount of time? Do you see it at specific intervals?

Also, please install the latest firmware (1.6.4) from this site:

»support.deliberant.com/ShowPost.···stID=217

Scroll to the bottom of the page for 1.6.4.

Let us know if you continue to have problems!

-Hal
Yes, it counts down second by second...Even after a 1.64 upgrade it's still doing it.. It used to never count down till this started. If there's traffic on the AP all works fine]]> http://www.dslreports.com/forum/remark,14345961 Mon, 12 Sep 2005 11:11:35 EDT Re: Deliberant 1300 falls "asleep" http://www.dslreports.com/forum/remark,14345933 dongato17 : The problem with the 2300 has been identified as a WLAN driver bug in the realtek driver, and we are waiting for the fix from them. This is the first time we have had this problem come up for the 1300, which is a different WLAN driver.

What is the X in the X amount of time? Do you see it at specific intervals?

Also, please install the latest firmware (1.6.4) from this site:

»support.deliberant.com/ShowPost.···stID=217

Scroll to the bottom of the page for 1.6.4.

Let us know if you continue to have problems!

-Hal
--
Harold Bledsoe
Deliberant Wireless
»www.deliberant.com]]> http://www.dslreports.com/forum/remark,14345933 Mon, 12 Sep 2005 11:06:57 EDT Re: Deliberant 1300 falls "asleep" http://www.dslreports.com/forum/remark,14345927 davidpaj :
said by davidpaj See Profile :

said by bito See Profile :

Sounds new to me too. What clients are you using? How many? What version of the firmware?
I'm using firmware 1.63. I have two 1300's as clients and one Linksys Wet11. Everybody stays associated, then everyboy gets dropped after X amount of time. Do a site survey on the AP..... Everybody comes back again.
Could this help? If you go to show clients, you see they are conntected...... But the expired time is counting down... When it runs out....... they all drop.]]> http://www.dslreports.com/forum/remark,14345927 Mon, 12 Sep 2005 11:06:26 EDT Re: Deliberant 1300 falls "asleep" http://www.dslreports.com/forum/remark,14345876 Chele : This happens to us with the 2300's if the SSID is not broadcast. We have several 1300's without that issue though. Try broadcasting the SSID see if it helps.]]> http://www.dslreports.com/forum/remark,14345876 Mon, 12 Sep 2005 10:57:22 EDT Re: Deliberant 1300 falls "asleep" http://www.dslreports.com/forum/remark,14345780 davidpaj :
said by bito See Profile :

Sounds new to me too. What clients are you using? How many? What version of the firmware?
I'm using firmware 1.63. I have two 1300's as clients and one Linksys Wet11. Everybody stays associated, then everyboy gets dropped after X amount of time. Do a site survey on the AP..... Everybody comes back again.]]> http://www.dslreports.com/forum/remark,14345780 Mon, 12 Sep 2005 10:39:58 EDT Re: Deliberant 1300 falls "asleep" http://www.dslreports.com/forum/remark,14345200 bito : Sounds new to me too. What clients are you using? How many? What version of the firmware?]]> http://www.dslreports.com/forum/remark,14345200 Mon, 12 Sep 2005 08:35:51 EDT Re: Deliberant 1300 falls "asleep" http://www.dslreports.com/forum/remark,14343557 davidpaj :
said by IntraLink See Profile :

Haven't seen it, but for an AP that is intolerable.

You need to replace it. I'm sure Caleb will work with you on that. Since the 1300 is discontinued, you might want to trade up to a 2300 while you're at it!
I'll see what he has to say... Thing is as long as there's "activity" on it... It won't fall asleep]]> http://www.dslreports.com/forum/remark,14343557 Sun, 11 Sep 2005 22:41:59 EDT Re: Deliberant 1300 falls "asleep" http://www.dslreports.com/forum/remark,14343437 IntraLink : Haven't seen it, but for an AP that is intolerable.

You need to replace it. I'm sure Caleb will work with you on that. Since the 1300 is discontinued, you might want to trade up to a 2300 while you're at it!]]> http://www.dslreports.com/forum/remark,14343437 Sun, 11 Sep 2005 22:22:00 EDT Deliberant 1300 falls "asleep" http://www.dslreports.com/forum/remark,14342787 davidpaj : I have a 1300 as an AP, works well, except sometimes it "drops" all clients...... go in the ap, do a site survery and it reassociates all. Thie is a new one.... anyone else seen this issue?]]> http://www.dslreports.com/forum/remark,14342787 Sun, 11 Sep 2005 20:38:53 EDT