I did not see this information posted anywhere in the Speakeasy Forum so I thought I would contribute... If this information is already known, sorry for the useless post.
This is a config that I wrote last night for the WIC-1ADSL card running on Speakeasy with static services. The IOS version on the 2621XM is 12.3.10, Enterprise Basic.
If you have any questions, please let me know.
_________________________________________
bridge irb ! interface FastEthernet[#/#] [Inside IP Address] [subnet] ip nat inside ! interface ATM[#/#] no ip address no atm ilmi-keepalive bundle-enable dsl operating-mode auto no clns route-cache bridge-group [#] hold-queue 224 in pvc 0/35 encapsulation aal5snap ! ! interface BVI[#] ip address [Primary IP Address] [subnet] ip address [Additional IP Address] [subnet] secondary ip address [Additional IP Address] [subnet] secondary ip address [Additional IP Address] [subnet] secondary ip nat outside ! ip nat inside source list [#] interface BVI[#] overload ! ip route 0.0.0.0 0.0.0.0 BVI[#] ! access-list [#] permit [Inside IP Addresses][Wild-Card Mask] ! bridge [#] protocol ieee ! bridge [#] route ip !
