Search:  

 
 
   All FAQsSite FAQDSL FAQCable TechAbout DSLDistanceCLECSDSL Hurdles»»






how-to block ads



Search for: in all FAQs
FAQ RevisionsEditors: skj See Profile, Covenant See Profile, aryoba See Profile, Phraxos See Profile
Last modified on 2009-11-27 07:30:01

30.4 Routing Technology

·Static Routing
·RIP: An Introduction
·EIGRP: An Introduction
·OSPF: An Introduction
·Multicast - Introduction and Sample Configurations
Prerequisite Reading
»Cisco Forum FAQ »Quick and Easy Subnetting on Routing, Switching and Network Design Relationship

Some discussions
»[HELP] Static Routing

feedback form

by aryoba See Profile
last modified: 2009-11-02 12:13:19

www.cciecandidate.com

RIP version 2: Basic
Convergence and Loop Prevention
Configuration
Definitions

feedback form

by aryoba See Profile

www.cciecandidate.com

Basics
Tables, Convergence and Going Active
Configuration
Definitions

Cisco website

Metric Computation

feedback form

by aryoba See Profile

www.cciecandidate.com

Basic
Database Exchange
Designated Routers in LAN
Designated Routers in WAN
Design, LSA Types, and Stubby Areas
Configuration
Definitions
Redistribution: RIP, EIGRP, OSPF
Route Summarization: RIP, EIGRP, OSPF
Default Routes: RIP, EIGRP, OSPF

feedback form

by aryoba See Profile

Some Discussions

»Broadcasting.... TCP or UDP
»[HELP] LLDP Multicast storm
»dot11radio, vlans and bridging
»[HELP] Limiting Multicast and Half Duplex Collisions
»OSPF over a non-multicast link?
»[Config] HSRP Config Issue
»Odd HSRP multicast traffic
»Multicast groups
»[HELP] testing a CDN
»Boarderware Mail Firewall and PIX configuration
»CGMP used by Cisco LAN switches
»[Config] Multicast configuration Question
»multicast addresses
»Forwarding multicast packets
»Multicast packets being dropped between cisco rout
»Invalid source address error

Documentations

www.netcraftsmen.net/welcher
The Protocols of IP Multicast
PIM Dense Mode
PIM Sparse Mode
IP Multicast and PIM Rendezvous Points
Troubleshooting Too Much Multicast
IP Multicast, Best Practices and Control

www.cciecandidate.com
Introduction to Multicasting - Basics
Introduction to Multicasting - Addressing
IGMP version 1
IGMP version 2
IGMP version 1 and 2 Interoperability and Timers
IGMP version 3 and Multicast Listener Discovery Protocol (MLD)
CGMP
IGMP Snooping
RGMP
Multicasting - Definitions
IP Multicast Routing - Basics
IP Multicast Routing - PIM DM
LAN Issues with PIM when there are multiple PIM-speaking routers on the same LAN segment
Distance Vector Multicast Routing Protocol (DVMRP) and Multicast Open Shortest Path First (MOSPF)
IP Multicast Routing - PIM SM Part 1 of 2
IP Multicast Routing - PIM SM Part 2 of 2
RP Discovery and Discovery; Bidirectional PIM
IP Multicast Routing - Definitions
Multicast Static RP
PIM Sparse: Shared Root = RP
Multicast RPF Check
Multicast Redundant RP with MSDP

Cisco website

Introduction
IP Multicast Technical Overview
IP Multicast Deployment Fundamentals
Guidelines for Enterprise IP Multicast Address Allocation
IP Multicast Best Practices for Enterprise Customers

PIM
IP Multicast Load Splitting - Equal Cost Multipath (ECMP) Using S, G and Next Hop
PIM Dense Mode State Refresh
PIM Version 2
PIM Sparse: Configuring RP (Rendezvous Point)
Configuring RP and related topics
PIM Sparse: Switching from Shared Tree (from RP to receiver) to Source Tree or Shortest-Path Tree (from Source directly to receiver) once the threshold in Kbps reaches
Bidirectional PIM
Anycast RP and Multicast Source Discovery Protocol (MSDP)

IGMP, CGMP, and RGMP
Customizing IGMP
Multicast in a Campus Network: CGMP and IGMP Snooping
IGMP State Limit
Using RGMP: Basics and Case Study

Quick References
Configuring IP Multicast Routing
Configuration Examples and TechNotes
IP Multicast Configuration Guide
Cisco IOS IP Multicast Command Reference
Multicast Quick-Start Configuration Guide
Cisco Multicast Support Matrix
Basic Multicast Troubleshooting Tools
no ip mroute-cache command in an interface configuration to be sure that you see multicast packets when doing a debug ip mpacket troubleshooting
IP Multicast Troubleshooting Guide

Tips and Tricks
Constraining Multicast Traffic with Source and Receivers on the Same VLAN on Catalyst Switches Running Catalyst OS
Using IP Multicast Over Frame Relay Networks
Using MSDP to Interconnect Multiple PIM-SM Domains
Multicast Source Discovery Protocol SA Filter Recommendations
Multicast Support for MPLS VPNs Configuration Example
PIM RPF Vector

Sample Configurations

Scenario 1:
There are two redundant routers act as edge routers receiving multicast feed from external network over DS-3 circuits.

Router #1

Router #2

Scenario 2:
Sample configuration on Catalyst 4500 series switch, act as MDF; contribution of mplex See Profile.

Note:
Anyone using this should be aware that multicast is not configured for redundancy at the MDF level here, and you need to make sure your primary HSRP router has a higher PIM DR priority than default to avoid flooding.



feedback form

by aryoba See Profile
last modified: 2009-11-24 06:45:45



Saturday, 28-Nov 16:33:47 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 10 years online! © 1999-2009 dslreports.com.republican-creole